Tag Archives: Tv Firmware Software Free Download

TP.HV510.PC822 Android 4K Board

TP.HV510.PC822 is a Smart WIFI Network Intelligent 4k Triple LED TV Board that is suitable for the Middle East and Asian Markets. TP_HV510_PC822 can support up to 3840×2160 Ultra High Definition (UHD) Resolution. TP-HV510-PC822 is compatible with 42 inches to 65-inch screen panels. TP HV510 PC822 has many universal connectivity interfaces and multiple input ports like Dual AV, Dual HDMI, Dual USB, VGA input, etc.

A special port is given for external SD card memory. RJ45 Connector is available for wired internet connection. Its WIFI reception is very strong. Audio and Video Quality of TP.HV510.PC822 is very good. TP.HV510.PC822 is a triple board that has a backlight driver, ATV module, and power supply built-in in a single card. TP.HV510.PC822 firmware file and emmc backup file are given below for the technician’s support

Technical Specifications:

Brand/Mark: China Universal 4K Three-In-One Motherboard

Main Board Model: TP.HV510.PC822

Backlight :  111-180V 80W 500mA

OS: Android 4.4, 5.1, 7.1

CPU Frequency: 1.2 GHz

GPU Frequency: 432 MHz (4 Core GPU)

Ram: 1Gb DDR

Rom: 4/8 Gb eMMC

Screen Supported: 42″ to 65″

Resolution: up to 3840X2160 UHD

Service Code: 2580

Power Consumption: 108 Watt

Firmware Type: USB Upgrade, EMMC Backup

Firmware File: allupgrade_v510_1G_47.bin

Note: Following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

TP.HV510.PC822 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

ONIDA LEO32HIB Smart LED TV

Onida LEO32HIB (32 inch) HD Ready Smart TV has a screen diagonal of 32 inches, while Micromax 32T6175MHD (32 inch) HD Ready LED TV has a screen diagonal of 32 inches. Onida LEO32HIB (32 inch) HD Ready Smart TV has dimensions of 792 (W) x 474 (H) x 85 (D) mm, while Micromax 32T6175MHD (32 inch) HD Ready LED TV has dimensions of 733 (W) x 436 (H) x 91 (D) mm. The former has an excellent HD Ready resolution of 1366 x 768 pixels and a refresh rate of 60 Hz. The latter has an excellent HD Ready resolution of 1366 x 768 pixels and a refresh rate of 60 Hz.

It was available at the lowest price on Amazon India on 13 August 2024. Check out the detailed specifications and features of the Onida LEO32HIB (32-inch) HD Ready Smart TV. Onida, a popular Indian electronics manufacturer, has established a reputation as one of the leading TV manufacturers in India and is also a popular home appliance manufacturer. The company has now entered the competitive and growing mobile phone segment with a range of affordable products.

Onida LEO32HIB (32 inch) HD Ready Smart TV or Micromax 32T6175MHD (32 inch) HD Ready LED TV? Then your search ends here. Compare the two models based on price in India, body, display, storage, connectivity, camera, and performance to find the best TV for you. Onida LEO32HIB (32 inch) HD Ready Smart TV starts from ₹16,990 and Micromax 32T6175MHD (32 inch) HD Ready LED TV starts from ₹16,822.

General Specifications:

Brand/Make: ONIDA

LED Model: LEO32HIB

Resolution: 1366×768

Board:

Android Version: 4.4

CPU: ARM Cortex A7 Quad-Core CPU 1GHz

GPU: Multi-core Mali -450MP2

RAM: 1GB

Rom: 4Gb/8Gb

Power Input: 100v-240 v

Power Consumption: 65w

Firmware Type: USB Update

Firmware: MstarUpgrade.bin

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

Onida LEO32HIB firmware for free download:

• ONIDA-32HIB-4GB-Firmware-USB.part1
• ONIDA-32HIB-4GB-Firmware-USB.part2
• ONIDA-32HIB-8GB-Firmware-USB.part1
• ONIDA-32HIB-8GB-Firmware-USB.part2

Customer Configuration Files

Customer Configuration Files. Some LCD/LED TV Universal Android Smart Boards like Cultraview manufacturer (CV338) have the feature to change the Logo, Background image, Wall screen, Remote, Panel Resolution, Screen parameters, and Animations with the easy method by USB disk. It means you can modify or change or update the said items in your LED TV by your own Choice.

These files are in a specific name and format and are called Customer Configuration Files. Mostly we use the Remote IR Configuration Files and Logo Configuration files of our own choice. Here in this post, many user configuration files are given that may you download them free of cost and apply them according to your own requirements.

• CV338_Configuration_Patch_Files
• CV920_Configuration_Patch_Files
• CV950X_Configuration_Patch_Files
• MSD338_Configuration_Patch_Files
• MSD358_Configuration_Patch_Files
• ATM30_Configuration_Patch_Files
• CV628H-B42_Configuration_Patch_Files

Here is the video tutorial for the idea:

Note: The following given CustomerConfig files are USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of updating/Installing these files.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

You can also download All LCD/LED TV Logo from the given link:

Download Here

CustomerConfig files for Free Download:

T.V53.03 Universal LCD/LED TV Controller Board

T.V53.03 is a universal LCD LED TV Controller Driver board with a Jumper Cap setting.

Basic Info:

Model No. T.V53.03

Main Chipset: TSUMV53RUU-Z1

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

TV Format: Analog Signal

Support Language: Russian, English, Hindi, Simplified Chinese, Khmer, Vietnamese, Myanmar, French, German, Italian, Spanish.

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: LVDS Double 6

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Screen voltage: 3.3V / 5V / 12V (Jump cap)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 3-5 Amp

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Firmware Name: VST53C_4MB_M.bin

Firmware Type: USB upgradeable

Not only USB interface can be used to upgrade programs, but also can use to play video/music/photo, basically, formats are supported. You can also set a boot display pictures or LOGO and Mirror Enable.

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plugin the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led flashing stop (or flashing speedily)
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following given firmware/software is USB upgradeable. Download all parts of the required resolution and then extract/unzip anyone of them you will get the folder. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of your required resolution and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch video Click Here

T.V53.03 Firmware All resolutions Free Download Here :

HK.T.RT2861V08 4K Smart Board

HK.T.RT2861V08 is an LCD/LED TV controller board. That’s a digital and analog TV control board, which is suitable for Australia, Southeast Asia, MIDE, and Africa of the DVB T2 / DVBT market. It is designed to apply the V-by-one as the interface. which can support LED panels larger than 28 ” with a resolution is up to 3840×2160.

HK_T_ RT2861V08X is intended to support the analog TV signal, Digital TV, NICAM / A2, USB (3.0 and 2.0), HDMI (V2.0), PC-RGB, CVBS, TF CARD, and YPbPr as well Coaxial output. And an audio amplifier that can support 2X8W speaker output. The program is a built-in Cortex A53 ARM quad-core CPU main chip and Android7.1 OS, Also supports wired and wireless network connection, so you can browse the web internet and play online videos. The HK-T-RT2861V08 firmware file is given below for the technician’s support.

General Specifications:

Make: Realtek

Model: HK.T.RT2861V08

Main Chipset: RTK2861

Resolution Supported: 3840×2160

OS: Android 7.1.1

RAM: 1.5G

ROM: 4G

CPU: A53*4

GPU: IMG7800

Audio Output Power: 2X10 W (8Ω)

Tuner: DVB-T/T2

Service Code: 2580

Firmware File: Install.img

Firmware Type: USB Upgradeable

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

HK.T.RT2861V08 Firmware files for Free Download:

• HK.T.RT2861V08-3840×2160-JVC-ASANO.part1
• HK.T-RT2861V08-3840×2160-JVC-ASANO.part2
• HK.T.RT2861V08-3840×2160-1.5G-4G-Philco.part1
• HK.T-RT2861V08-3840×2160-1.5G-4G-Philco.part2

HK.T.RT2831P588 Smart LED TV Board

HK.T.RT2831P588 is a smart Android Intelligent Network LCD/LED TV Board. This board is best fit for HD and FHD LED screen panels, with maximum resolution up to 1920×1080 Full HD. HK_T_RT2831P588 is a three-in-one (combo) board i.e power card, backlight driver module, and ATV board is built in it. Full specification to support user, it has multiple input interfaces such as Wifi, Ethernet LAN, VGA, USB, HDMI, Headphones, and RCA input.

HK-T-RT2831P588 supports Laptop and PC connectivity by its VGA interface port, and LAN ports for wired internet connectivity. It is also built in a Wireless interface. Users can play their own choice multimedia files every time and also can upgrade software by the USB input interface. HK.T.RT2831P588 support for analog TV signals, and digital TV (DTMB new national standard). HK.T.RT2831P588 firmware file is given below for the technician’s support.

General Specifications:

Model: HK.T.RT2831P588

Main Chipset: RTD2831PSZ

Resolution Supported: 1920×1080

CPU: Quad-core ARM Cortex A53

GPU: Dual-Core

OS: Android 7.11

Ram: 1Gb

Rom: 8Gb

EMMC: THGBMDG5D1LBAIL

Audio Output Power: 2X8 W (8Ω)

Backlight:

Backlight Power:

Service Code:

Firmware File: Install.img

Firmware Type: USB upgradeable Firmware

Caution: 

All the pictures and specification details related to HK.T.RT2831P588 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home. If the LED TV is slow then reset it to Factory Default only.

Pros:

There are many advantages to installing the given HK.T.RT2831P588 USB software or eMMC backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given USB software or EMMC backup file
• Remote and Logo may change at your own choice to satisfy the customer
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given HK.T.RT2831P588 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Remote Control may not work and the Logo may change by writing the given software
• Panel screen parameters may be changed

HK.T.RT2831P588 Android Version Upgrade:

Please note that the installed version in this board is the final version and the Android version is not updateable. So, no need to upgrade the software if the board is working normally. Only if, the default software malfunctions due to some bugs will the manufacturer provide the software update. Otherwise, no version update is issued.

HK.T.RT2831P588 EMMC Backup:

This board has a 4/8GB eMMC chip. you can read the EMMC backup by Pendrive but for writing a backup of EMMC you should jtag the mainboard HK.T.RT2831P588 and write by a programming tool. Be careful while writing emmc backup file, if the board is on standby light due to wrong software or incomplete installation then you can do it, otherwise, it is on standby or red light due to hardware fault. So, first trace the fault. In this case, no need to write emmc backup.

HK.T.RT2831P588 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications, the newest Android version, and the latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable and EMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. For more Detail about the download process watch the video Click Here

HK.T.RT2831P588 Firmware file for Free Download:

Firmware File:

HK_T_RT2831P588_1920x1080_1G_8G\166_2831P588_1G_8G_PR180628A60S_HV320FHB-N00_CJ_T2_190926_160723_svn25549.zip

HK.T.RT2861P839 4K Smart Board

HK.T.RT2861P839 is a DVB-T2 4K Digital Internet TV 3-in-1 LCD/LED TV motherboard. It is suitable for the LVDS interface and supports more than 65 inches of LED panels, with a maximum resolution of up to 3840×2160. HK_T_RT2861P839 is a three-in-one (combo) board i.e. power card, backlight driver module, and ATV board built into it. HK-T-RT2861P839 has all connectivity interfaces as per the latest user requirements such as multi HDMI input ports, RCA input, USB2.0 & USB3.0 inputs, VGA interface for computer connectivity, and RF tuner.

HK T RT2861P839 is a universal board but is also installed in different LED TV brands. Some of them are Echolink, Clever TV, and Magic LED TV, etc. Realtek processor is used in this motherboard that’s why its graphic quality is very excellent. Its USB interface can be used for loading software as well as for playing multimedia files. HK-T-RT2861P839 can receive Digital TV (DTV) signal broadcasting and analog TV signals as well. HK.T.RT2861P839 software is shared below for the support of technicians.

General Specifications:

Model: HK.T.RT2861P839

Main Chipset: RTK2861

Resolution Supported: 3840×2160

OS: Android 7.1.1

RAM: 1.5G

ROM: 4G/8G

CPU: A53*4

GPU: IMG7800

Audio Output Power: 2X10 W (8Ω)

Tuner: DVB-T/T2

Service Code: 2580

Firmware File: Install.img

Firmware Type: USB Upgradeable

Caution: 

All the pictures and specification details related to HK.T.RT2861P839 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home. If the LED TV is slow then reset it to Factory Default only.

Pros:

There are many advantages to installing the given HK.T.RT2861P839 USB software or eMMC backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given USB software or EMMC backup file
• Remote and Logo may change at your own choice to satisfy the customer
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given HK.T.RT2861P839 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Remote Control may not work and the Logo may change by writing the given software
• Panel screen parameters may be changed

HK.T.RT2861P839 Android Version Upgrade:

Please note that the installed version in this board is the final version and the Android version is not updateable. So, no need to upgrade the software if the board is working normally. Only if, the default software malfunctions due to some bugs will the manufacturer provide the software update. Otherwise, no version update is issued.

HK.T.RT2861P839 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications, the newest Android version, and the latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable and EMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

HK.T.RT2861P839 Firmware files for Free Download:

Firmware Name:

200_YiMao_2861P839_1.5G_4G__ST5461D07-1_Iraq_190110_112456_svn18450

218_2861P839_1.5G_4G_YiMao_YM2018405_Iraq_190508_165005_svn21112

LD.M538.A 4K Smart Board

LD.M538.A is an Intelligent smart 4K network driver LED TV board with a support resolution of 3840×2160. LD_M538_A is dedicated to 60 Hz screens. It is not a combo board. Smart UHD TV With Android Platform and great features to entertain ultra HD Wide Screen with better to work SMART. LD-M538-A has the full features of input interface connectivity. It has multiple ports like HDMI, AV, Headphone, SCART, VGA interface, USB ports, and RJ45 Ethernet port for wired internet connectivity. Its USB interface can be used for Firmware upgrades as well as for multimedia playback.

LD M538 A is a digital and analog TV board, it can receive analogtelevision (PAL/SECAM/NTSC) and digital television (DVB-C DVB-S2 DVB-T2) signals. LD.M538.A Firmware file is given below for the Technician’s support. LD.M538.A Main Board is used for AKAI UHD SMART LED TVs, Polarline LED TVs, and many more UHD Smart LED TVs. LD.M538.A is also used for other Brands’ 4K Ultra HD LED TVs.

General Features & Specifications:

Brand/Make: LCD/LED 4K Smart Driver Board

Model: LD.M538.A

Supported Resolution: 3840×2160 UHD 4K

Screen Format: 16:9

Operating System: Android 6.0

CPU: A9

RAM:  1.5GB DDR3

ROM: 4Gb

OSD Language: Spanish/English/French

Sound Output: 7Wx2

RF TUNER: DVB-C / S2 / T2 MPEG-1 layer 1/2, MPEG-2 layer 2

Video System: PAL/SECAM/NTSC

Power Input: 100-240 ~ 50/60Hz

Power Consumption: 138W

Standby Power: 0.5W

Firmware: LDM538.bin

Firmware Type: USB Updateable Firmware, LD.M538.A program data USB

Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

LD.M538.A LED TV Motherboard is used for the following brands:

• AKAI AKTV505 UHD SMART
• POLARLINE 43PL12STC-SM
• POLARLINE 50PL52TC-SM
• POLARLINE 55PL12TC-SM
• Q.BELL QT43k03 UHD SMART
• Erisson 55ULEA99T2SM
• ARIELLI LED-50DN4A6 UHD SMART
• OK ODL43680U-TIB

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

LD.M538.A firmware file for free download:

• LD-M538-A-3840×2160-1.5G-8G-HUIDI-USB.part1
• LD-M538-A-3840×2160-1.5G-8G-HUIDI-USB.part2
• LD-M538-A-3840×2160-AKAI-AKTV704S-USB.part1
• LD-M538-A-3840×2160-AKAI-AKTV704S-USB.part2
• LD-M538-A-3840×2160-AKAI AKTV5010.part1
• LD-M538-A-3840×2160-AKAI AKTV5010.part2
• LD-M538-A-3840×2160-1.5G-8G-NORDMENDE ND75KS4000S.part1
• LD-M538-A-3840×2160-1.5G-8G-NORDMENDE ND75KS4000S.part2

LDD.M538.B138 4K UHD Smart LED TV Board

LDD.M538.B138 is an Intelligent smart 4K network driver LED TV board with a support resolution of 3840×2160. LDD_M538_B138 is dedicated to 60 Hz screens. It is not a combo board. Smart UHD TV With Android Platform and great features to entertain ultra HD Wide Screen with better to work SMART. LDD-M538-B138 has the full features of input interface connectivity. It has multiple ports like HDMI, AV, Headphones, VGA interface, USB ports, and RJ45 Ethernet port for wired internet connectivity. Its USB interface can be used for Firmware upgrades as well as for multimedia playback.

LDD M538 B138 is a digital and analog TV board, it can receive analogtelevision (PAL/SECAM/NTSC) and digital television (DVB-C DVB-S2 DVB-T2) signals. LDD.M538.B138 Firmware file is given below for Technician’s support. LDD.M538.B138 Main Board is used for MANTA LED TVs, Spectrum LED TVs, and Starlight UHD Smart LED TVs. LDD.M538.B138 is also used for other Brands’ 4K Ultra HD LED TVs.

General Features & Specifications:

Brand/Make: LCD/LED 4K Smart Driver Board

Model: LDD.M538.A138

Supported Resolution: 3840×2160 UHD 4K

Screen Format: 16:9

Operating System: Android 6.0

CPU:

GPU:

RAM: 1.5GB/ 1GB DDR3

ROM: 4Gb/8Gb

OSD Language: ENGLISH/POLISH

Sound Output: 8Wx2

RF TUNER: DVB-C / S2 / T2 MPEG-1 layer 1/2, MPEG-2 layer 2

Video System: PAL/SECAM/NTSC

Power Input: 100-240 ~ 50/60Hz

Power Consumption: 135W

Standby Power: 0.5W

Factory Code: Source 2580

Firmware: LDM538.bin

Firmware Type: USB Updateable Firmware, LDD.M538.B138 program data USB

Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

This LED TV Motherboard is used for the following popular models:

• ELECTRIQ EIQ-55UHDT2
• Sansui Smx5019usm
• Awox U5600STR 55′ Android TV
• Rca Rtv55z1usm
• Rca Rtv5019usm
• MANTA 43LUA29L
• Zephir zvs43uhd
• Akai AKTV5036S

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

LDD.M538.B138 firmware file for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Universal Smart Android Board Installation Guide With Original 40 Inches SONY LED TV

P75-2841V6.0 Firmware

P75-2841V6.0 is a high-speed smart network universal driver board with an FHD resolution of 1920×1080. It is dedicated to 43″ to 55″ screens. It has a powerful wifi system. Smart FHD TV features With Android Platform and great features to entertain Full HD Wide Screen with better to work SMART feature. P75-2841 V6.0 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to VGA, Scart and Headphones also. P75_2841_V6.0 has a LAN/RJ45 Ethernet Connector interface port also for the wired/cable internet network.

P75 2841 V6.0 is a Combo high-speed Network Triple play motherboard that has the  ATV, Backlight Driver Board, and Power Supply Module built-in in it. The Video and Sound quality of the P75-2841-V6.0 android board are very good and the Response rate is very efficient. P75.2841.V6.0 china smart network board has an android 7. x version. P75-2841V6.0 board bifurcated into two types according to its configuration that is given in the picture below.

Specifications & Features:

Brand/Mark: FHD Smart LED TV Main Board

Main Board Model: P75-2841V6.0

Main Chipset: RTD2841PSA

Interface: Single/Dual LVDS

TV System:  DVB-T/T2/S/S2/C

Operating System: Android 7.x

Ram: 1Gb

Rom: 4Gb/8Gb eMMC

Backlight: 72 to 79 V 560 mA

Audio Output: 2x8w (8 Ω)

Resolution: up to 1920×1080 (43” to 55″)

Panel Power: 12V

Power Input: 100-240V AC

Service Menu Code: Source/Input 2008, Menu 1201

Note: The following given Software/Firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of installing/downloading the firmware/software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of your required resolution and then extract any one of them you will get the folder. Now copy the files to USB. For more detail about the download process watch the video Click Here

P75-2841V6.0 firmware for free download:

• P75.2841V6.0-1920×1080-Grunkel-40-USB.part1
• P75.2841V6.0-1920×1080-Grunkel-40-USB.part2
• P75.2841V6.0-1366×768-AKAI AKTV3225-USB.part1
• P75.2841V6.0-1366×768-AKAI AKTV3225-USB.part2
• P75.2841V6.0-1920×1080-DREAMSAT DS40S1-USB.part1
• P75.2841V6.0-1920×1080-DREAMSAT DS40S1-USB.part2
• P75.2841V6.0-1920×1080-Revolution Galaxy-USB.part1
• P75.2841V6.0-1920×1080-Revolution Galaxy-USB.part2