TP.SK518D.PB818 is an android network driver smart led tv board with an FHD resolution of 1920×1080. TP_SK518D_PB818 has a powerful wifi system. Smart FHD TV With the latest Android Platform and great features to entertain Full HD Wide Screen with better-to-work SMART. TP SK518D PB818 Smart Board has multiple ports A/V, USB interface Ports, and a single HDMI port as well in addition to the VGA interface for computers. TP-SK518D-PB818 has a LAN/RJ45 Connector interface port also for the wired internet network.
TP.SK518D.PB818 is a Combo Network Triple play board that has the Digital TV tuner built-in in it (DTMB/DVB-C/ATSC/ISDB-T). The Graphics and Sound quality of this android board are very good and the Response rate is very efficient. TP.SK518D.PB818 china smart network board is the best fit for 32″ LED Panels. TP.SK518D.PB818 firmware file is available for the technician’s support. If you are facing any issues during firmware installation then visit and read here first.
General Specifications:
Brand/Mark: Main Board (Android WIFI Network Drive Smart Board)
Note The following given Software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware.
How to Download Firmware Files:
Download all parts of the following given firmware/Software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
TP.SK516S.PB802 is an Android network driver smart LED TV board with an FHD resolution of 1920×1080. TP_SK516S_PB802 has a powerful wifi system. Smart FHD TV With the latest Android Platform and great features to entertain Full HD Wide Screen with better-to-work SMART. TP SK516S PB802 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to the VGA interface for computers. TP-SK516S-PB802 also has a LAN/RJ45 Connector interface port for the wired internet network.
TP.SK516S.PB802 is a Combo Network Triple play board that has the Digital TV tuner built-in in it (DTMB/DVB-C/ATSC/ISDB-T). The Graphics and Sound quality of the TP-SK516S-PB802 Android board are very good and the Response rate is very efficient. TP.SK516S.PB802 China smart network board can support up to 42″ LED Panels. TP.SK516S.PB802 firmware file is available for the technician’s support.
General Specifications:
Brand/Mark: CVTE Main Board (Android WIFI Network Drive Smart Board)
Main Board: TP.SK516S.PB802
Main Chipset: MT9256AAATAB
Operating System: Android 11.0
CPU: Multi Core Arm Cortex A53 64-bit
GPU: CA55*4
CPU Frequency: 1.2GHz
GPU Frequency: 432MHz
RAM: 1GB
ROM: 8 Gb
Resolution: up to 1920×1080
Screen Size supported: 24 to 43 Inch
Audio Output power: 2x10W
Mirror Mode: Yes
Logo Change: Yes
Bluetooth: Yes
Tuner: RAFAEL R842/RAFAEL RT710(DVBS)
ATV System: PAL, SECAM,NTSC
DTV System: DVB-T, DVB-C, DVB-S2
Input Voltage: 200-240V AC
Firmware Name: allupgrade516_8GB_1GB_ref00.bin
Firmware Type: EMMC BACKUP
Caution:
All the pictures and specification details related to TP.SK516S.PB802 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home. If the LED TV is slow then reset it to Factory Default only.
Pros:
There are many advantages to installing the given TP.SK516S.PB802 USB software or eMMC backup dump file. A few benefits are described below:
The dead board can be recovered and operational by loading the given USB software or EMMC backup file
Remote and Logo may change at your own choice to satisfy the customer
Money saving instead of changing the mainboard
Time-saving instead of arranging a new board
Customer satisfaction to do an urgent job
Skill and confidence improvement
Cons:
There may be some disadvantages to installing the given TP.SK516S.PB802 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:
The working board may go to the standby position
Remote Control may not work and the Logo may change by writing the given software
Panel screen parameters may be changed
TP.SK516S.PB802 Android Version Upgrade:
Please note that the installed version in this board is the final version and the Android version is not updateable. So, no need to upgrade the software if the board is working normally. Only if, the default software malfunctions due to some bugs will the manufacturer provide the software update. Otherwise, no version update is issued.
TP.SK516S.PB802 EMMC Backup:
This board has a 4/8GB eMMC chip. you can read the EMMC backup by Pendrive but for writing a backup of EMMC you should jtag the mainboard TP.SK516S.PB802 and write by a programming tool. Be careful while writing emmc backup file, if the board is on standby light due to wrong software or incomplete installation then you can do it, otherwise, it is on standby or red light due to hardware fault. So, first trace the fault. In this case, no need to write emmc backup.
TP.SK516S.PB802 Board Replacement:
If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications, the newest Android version, and the latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.
Note: The following firmware is a USB bootable and EMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.
How to Download TP.SK516S.PB802 Firmware Files:
Download all parts of the following given firmware/Software and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here
TP.SK518D.PB802 is an android network driver smart led tv board with an FHD resolution of 1920×1080. TP_SK518D_PB802 has a powerful wifi system. Smart FHD TV With the latest Android Platform and great features to entertain Full HD Wide Screen with better-to-work SMART. TP SK518D PB802 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to the VGA interface for computers. TP-SK518D-PB802 has a LAN/RJ45 Connector interface port also for the wired internet network.
TP.SK518D.PB802 is a Combo Network Triple play board that has the Digital TV tuner built-in in it (DTMB/DVB-C/ATSC/ISDB-T). The Graphics and Sound quality of the TP-SK518D-PB802 android board are very good and the Response rate is very efficient. TP.SK518D.PB802 china smart network board can support up to 42″ LED Panels. TP.SK518D.PB802 firmware file is available for the technician’s support.
General Specifications:
Brand/Mark: Main Board (Android WIFI Network Drive Smart Board)
Main Board: TP.SK518D.PB802
Main Chipset: MT9255
Operating System: Android 9.0
CPU: Multi Core Arm Cortex A53 64-bit
GPU: Mali-G31MP2
CPU Frequency: 1.2GHz
GPU Frequency: 432MHz
RAM: 512MB/1GB
ROM: 4/8 Gb
Resolution: up to 1920×1080
Screen Size supported: 32 to 42 Inch
Audio Output power: 2x8W
Mirror Mode: Yes
Logo Change: Yes
Bluetooth: Yes
Tuner: ATBM253
Input Voltage: 200-240V AC
Firmware Name: allupgrade518_8GB_1GB_sos.bin
Firmware Type: USB Updateable Firmware
Note The following given Software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download TP.SK518D.PB802 Firmware Files:
Download all parts of the following given firmware/Software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
