TP.MS338.PB818 Universal Smart Board

TP.MS338.PB818 is a universal smart integrated board with an Android wifi network function. TP MS338 PB818 is Three in One Network Driver Wi-Fi board that can support up to 26 to 46-inch screens. TP_MS338_PB818 can be equipped with various screens. TP.MS338.PB818 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to VGA, Scart, and Earphones. TP.MS338E-PA671 has a LAN/RJ45 Connector interface port also for the wired internet network.

TP.MS338.PB818 is a Combo Network Triple play board that has a Digital TV tuner built-in in it. The Graphics and Sound quality of the Android board are very good and the Response rate is very efficient. TP-MS338-PB818 China smart network board can support up to 32″ screen panels. TP.MS338.PB818 firmware is available for technician support.

General Specifications:

Brand/Mark: FHD Smart LED TV Main Board

Main Borad Model: TP.MS338.PB818

Main Chipset: DTMB: MSD6A338ST-WL OR MSD6A338ST-003J

OS: Android 4.4

CPU: A7*2

CPU Frequency: 1GHz

GPU: Mali400*2

GPU Frequency: 550MHz

Ram: 512Mb/1 Gb

Rom: 4Gb/8Gb eMMC

Backlight: 30v to 160v 45w

Audio Output: 2x8w

Resolution: upto 1920×1080 (26” to 46″)

Service Code: Menu+1147

Note: The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

How to Install:

• Copy the .bin file into the USB disk
• Connect the U-Disk to TV
• Switch on the TV
• Standby lights start flashing. when the light flashing speed increases it means it is complete.
• Switch OFF, Remove the Disk, and Switch ON again. Done

TP.MS338.PB818 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

TP.MS338.PB802 Android LED TV Board

TP.MS338.PB802 is a network triple-play Android LED TV Board. TP_MS338_PB802 is a combo board that supports screen resolutions 1920*1080 and 1366*768. It also supports an inverted or positive screen.

TP-MS338-PB802 is a smart TV board with a cloud iQIYI WIFI single board, suitable for 32 inches-50 inches screens. Watch movies online super smooth, using a powerful MS 338 quad-core chip that provides better image solutions and improves image clarity. TP MS338 PB802 has 4 GB built-in memory in it.

General Specifications:

Brand/Mark: FHD Smart DVB-T2 LED TV Main Board

Main Board Model: TP.MS338.PB802

Main Chipset:   DTMB: MSD6A338ST-WL OR MSD6A338ST-003J
DVB-T2: MSD6A338SXE-WLOR MSD6A338SXE-003J

TV RF: ATV(PAL)/DTV(DVB-T/DVB-T2)

OS: Android 4.4

CPU: A7*2

CPU Frequency: 1GHz

GPU: Mali400*2

GPU Frequency: 550MHz

Ram: 512 Mb

Rom: 4 Gb eMMC

AC input voltage: 100-240V AC

Screen Panel Voltage: 12v DC

Backlight current: 600mA

Backlight Voltage Range: 72V-82V

Backlight output voltage range: 30V-160V

Backlight output power: 45W

Audio Output: 2x8w (8 Ohm)

Resolution: upto 1920×1080 (32” to 50″)

Aspect Ratio: 16:09 (Wide Screen)

Service Code: Menu+1147

Mirror/Inverted Mode: Yes

Note: Following the given Mitashi MiDE032v20 HS firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dumping files then read here first.

How to Download Mitashi MiDE032v02 HS Firmware:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

TP.MS338.PB802 firmware for free download:

For video tutorials, visit “Kazmi Elecom” on my YouTube channel.

TP.MS338.PB801 Smart Board

TP.MS338.PB801 is a universal smart integrated board with an Android wifi network function. TP MS338 PB801 is a three-in-one network Driver Wi-Fi board that can support up to 32 to 48-inch screens. TP_MS338_PB801 can be equipped with various screens. TP.MS338 PB801 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to VGA, Scart, and Earphones. TP.MS338-PB801 has a LAN/RJ45 Connector interface port also for the wired internet network.

TP_MS338_PB801 is a Combo Network Triple play board that has a Digital TV tuner built-in in it. The Graphics and Sound quality of the TP.MS338-PB801 android board are very good and the Response rate is very efficient.  TP.MS338.PB801 firmware is available for technician support.

General Specifications:

Brand/Mark: FHD Smart DVB-T2 LED TV Main Board

Main Borad Model: TP.MS338.PB801

Main Chipset: DTMB: MSD6A338ST-WL OR MSD6A338ST-003J
DVB-T2: MSD6A338SXE-WLOR MSD6A338SXE-003J

OS: Android 4.4

CPU: A7*2

CPU Frequency: 1GHz

GPU: Mali400*2

GPU Frequency: 550MHz

Ram: 512 Mb & 1 Gb

Rom: 4/8 Gb eMMC

Backlight: 30v to 160v 45w

Audio Output: 2x8w

Resolution: upto 1920×1080 (32” to 46″)

Service Code: Menu+1147

Note: The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

How to Install:

• Copy the .bin file into the USB disk
• Connect the U-Disk to TV
• Switch on the TV
• Standby lights start flashing. when the light flashing speed increases it means it is complete.
• Switch OFF, Remove the Disk, and Switch ON again. Done

 TP.MS338.PB801 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

allupgrade_msd338_4G_ref29.bin
allupgrade_msd338_4G_ref34.bin

allupgrade_msd338_4G_ref54.bin

allupgrade_msd338_4G_ref68.bin