Tag Archives: T.VST29.03 Speficications

T.VST29.03 Software Free Download

T.VST29.03 Universal LCD/LED Controller Board

T.VST29.03 Firmware All Resolution Shared in this post.

Basic Info:

Model No. T.VST29.03

Main Chipset: TSUMV29, TSUMV39, TSUMV59

Trademark: Leroy

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

Board Size: 168.00 X 42.0 (mm)

T.vst29.03_Firmware

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for motherboard only)

Maximum Current for USB: 500mA

T.vst29.03

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (*. Bin file) to the U disk.

Step 3: Connect the U disk with Mainboard

Step 4: Connect the Keypad and IR also

Step 5: Connect the power supply, check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu+1147

Note: The following given firmware is USB Boot. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware and then extract you will get the folder. Now load the file by the programmer. For More Detail about download, process watch the video Click Here

T.VST29.03 Firmware All resolutions Free Download Here :

Kazmi-Elecom

S.NO.BOARD/DESCRIPTIONDOWNLOAD LINK
1T.VST29.03_1024x768Download
2T.VST29.03_1280x720Download
3T.VST29.03_1280x768Download
4T.VST29.03_1280x800Download
5T.VST29.03_1280x1024Download
6T.VST29.03_1366x768Download
7T.VST29.03_1440x900Download
8T.VST29.03_1600x900Download
9T.VST29.03_1680x1050Download
10T.VST29.03_1920x1080Download
11T.VST29.03_1920x1200Download
12T.VST29.03_ERGO_LE15C20Download
13T.VST29.03_MixDownload
14T.VST29.03_V59_17&19 InchDownload
15T.VST29.03B_V29&V39Download
error: Content is protected !!