Tag Archives: Receiver Dump File Free Download

LIFESTAR LS-9300 Satellite Receiver

LIFESTAR LS-9300 dump file or Flash file is a boot information data with software/program of a satellite receiver which is located at EEPROM or Flash IC or Memory IC of the receiver. The main processor/Microcontroller retrieves the information from memory when it is powered on to know how to work/boot. If fail to get the boot information then it may stuck on the power/red light or boot logo screen.

If the Flash IC/Memory IC of the LIFESTAR LS-9300 receiver is damaged for any reason or Its software/firmware malfunctions due to any reason then the Main Controller does not get any boot/basic information and the satellite receiver does not turn on. In this situation, we need to reprogram the flash ic with the matched hardware dump/flash file to get the receiver in normal condition. The dump file of LIFESTAR LS-9300 is given below for technician/user support.

Information and Specifications:

Manufacturer: LIFESTAR

Box Model: LS-9300

Main Board: ALI3510C-S15073 (180306)

Main Controller or Chipset: ALI3510C

Box Type: Digital

Flash Type: SPI SOP8/SOIC8

Flash Size: 4 Mb

Software Type: Backup Dump

Software Size: Mb

Download File Format: ZIP

Download Type: Free

Note:

Given receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with the STB Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the software.

LIFESTAR LS-9300 dump file for free download.

PREMIUM 12800 PLUS Satellite Receiver

PREMIUM 12800 PLUS dump file or Flash file is a boot information data with software/program of a satellite receiver which is located at EEPROM or Flash IC or Memory IC of the receiver. The main processor/Microcontroller retrieves the information from memory when it is powered on to know how to work/boot. If fail to get the boot information then it may stuck on the power/red light or boot logo screen.

If the Flash IC/Memory IC of the PREMIUM 12800 PLUS receiver is damaged for any reason or Its software/firmware malfunctions due to any reason then the Main Controller does not get any boot/basic information and the satellite receiver does not turn on. In this situation, we need to reprogram the flash ic with the matched hardware dump/flash file to get the receiver in normal condition. The dump file of PREMIUM 12800 PLUS is given below for technician/user support.

Information and Specifications:

Manufacturer: PREMIUM

Box Model: 12800 PLUS

Main Board:

Main Controller or Chipset:

Box Type: Digital

Flash Type: SPI SOP8/SOIC8

Flash Size: 4 Mb

Software Type: Backup Dump

Software Size: Mb

Download File Format: ZIP

Download Type: Free

Note:

Given receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with the STB Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the software.

PREMIUM 12800 PLUS dump file for free download.

STARSAT SR-490HD PRO Satellite Receiver

STARSAT SR-490HD PRO dump file or Flash file is a boot information data with software/program of a satellite receiver which is located at EEPROM or Flash IC or Memory IC of the receiver. The main processor/Microcontroller retrieves the information from memory when it is powered on to know how to work/boot. If fail to get the boot information then it may stuck on the power/red light or boot logo screen.

If the Flash IC/Memory IC of the STARSAT SR-490HD PRO receiver is damaged for any reason or Its software/firmware malfunctions due to any reason then the Main Controller does not get any boot/basic information and the satellite receiver does not turn on. In this situation, we need to reprogram the flash ic with the matched hardware dump/flash file to get the receiver in normal condition. The dump file of STARSAT SR-490HD PRO is given below for technician/user support.

Information and Specifications:

Manufacturer: STARSAT

Box Model: SR-490HD PRO

Main Board:

Main Controller or Chipset:

Box Type: Digital

Flash Type: SPI SOP8/SOIC8

Flash Size: 4 Mb

Software Type: Backup Dump

Software Size: Mb

Download File Format: ZIP

Download Type: Free

Note:

Given receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with the STB Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the software.

STARSAT SR-490HD PRO dump file for free download.

NEXT YE-2000 HD Satellite Receiver

NEXT YE-2000 HD dump file or Flash file is a boot information data with software/program of a satellite receiver which is located at EEPROM or Flash IC or Memory IC of the receiver. The main processor/Microcontroller retrieves the information from memory when it is powered on to know how to work/boot. If fail to get the boot information then it may stuck on the power/red light or boot logo screen.

If the Flash IC/Memory IC of the NEXT YE-2000 HD receiver is damaged for any reason or Its software/firmware malfunctions due to any reason then the Main Controller does not get any boot/basic information and the satellite receiver does not turn on. In this situation, we need to reprogram the flash ic with the matched hardware dump/flash file to get the receiver in normal condition. The dump file of NEXT YE-2000 HD is given below for technician/user support.

Information and Specifications:

Manufacturer: NEXT

Box Model: YE-2000HD

Main Board:

Main Controller or Chipset:

Box Type: Digital

Flash Type: SPI SOP8/SOIC8

Flash Size: 16 Mb

Software Type: Backup Dump

Software Size: Mb

Download File Format: ZIP

Download Type: Free

Note:

Given receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with the STB Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the software.

NEXT YE-2000 HD dump file for free download.

PREMIUM HD X22400 Satellite Receiver

PREMIUM HD X22400 dump file or Flash file is a boot information data with software/program of a satellite receiver which is located at EEPROM or Flash IC or Memory IC of the receiver. The main processor/Microcontroller retrieves the information from memory when it is powered on to know how to work/boot. If fail to get the boot information then it may stuck on the power/red light or boot logo screen.

If the Flash IC/Memory IC of the PREMIUM HD 22400 receiver is damaged for any reason or Its software/firmware malfunctions due to any reason then the Main Controller does not get any boot/basic information and the satellite receiver does not turn on. In this situation, we need to reprogram the flash ic with the matched hardware dump/flash file to get the receiver in normal condition. The dump file of PREMIUM HD X22400 is given below for technician/user support.

Information and Specifications:

Manufacturer: PREMIUM HD

Box Model: X22400

Main Board:

Main Controller or Chipset:

Box Type: Digital

Flash Type: SPI SOP8/SOIC8

Flash Size: 4 Mb

Software Type: Backup Dump

Software Size: Mb

Download File Format: ZIP

Download Type: Free

Note:

Given receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with the STB Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the software.

PREMIUM HD X22400 dump file for free download.

NEXT YE-2000 HDCX Satellite Receiver

NEXT YE-2000 HDCX is a Full HD 1920×1080 digital satellite receiver. It can support Dvb-S2 / Mpeg2 / Mpeg4 H.264 / Avc, Full Compatibility. It Has a 20,000 Channel Memory Capacity. It Has a Dual-Core Main Processor, 16Mb Flash Memory, and 256Mb Ddr RAM. It Has HD, SD Channel, and Media Content Display. It has a 32-bit HD-quality User Interface. It can display 3D Broadcasts as well as 2D broadcasts. It Has Teletext Subtitle Multifeed Support. It Has SAT-IP support. It has recording and timeshift functions for TV channels via a USB device. It plays video and Music Files in Different Formats and picture Slide Shows.

NEXT YE-2000 HDCX has a 260mm Front Panel and an 8-digit Vfd Display. It Has HDMI Output, Analog Output (3xrca.It Hascvbs, L, R Stereo Audio). It Has an Optical SPDIF Digital Audio Output. It Has a Smart Card Reader (Ca). It Has a Tuner Loop Output. It Has an RJ45 10M/100M Ethernet Interface. It Has Dual USB 2.0 Input with USB Wi. It HasFi (MT7601) Device and USB HDD Usage at the Same Time. It Has 3G USB Modem Support. It Has IPTV and Video On Demand (VOD) Support. It Has Software Update Support Via a USB Device, RS232 Port, and Network. Operating Voltage of this box is 100Vac~240Vac 50Hz/60Hz.

Information and Specifications:

Manufacturer: NEXT

Box Model: YE-2000HD CX

Main Board:

Main Controller or Chipset: ALI

Box Type: Digital Full HD 1080P

Flash Type: SPI SOP8/SOIC8

Flash Size: 16 Mb

Software Type: Backup Dump

Software Size: Mb

Download File Format: ZIP

Download Type: Free

Attention:

All the pictures and specification details related to the NEXT YE-2000 HDCX receiver in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without installing the Flash Dump File. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

NEXT YE-2000 HDCX Receiver Version Upgrade:

Please note that the installed version in this board is the final version to operate the receiver normally. Mostly the manufacturer releases updates to fix the bugs in the previous version or adds some new features and applications for customer satisfaction and smooth working of the receiver. So, keep in mind to always save the backup of channels and TPs first. Keep the receiver connected with UPS while updating the new software version. Always follow the given instructions while upgrading to avoid any issues:

1. First of all, choose the appropriate version of the matching software upgrade
2. Connect the receiver or STB box with an Uninterrupted Power Supply
3. Save the backup of the flash file first to use it later if necessary
4. Keep the customized channel data
5. Get all the TPs or satellite list backup data

Pros:

There are many advantages to installing the given NEXT YE-2000 HDCX receiver USB software or flash dump file. A few benefits are described below:

1. The dead receiver can be recovered and operational by loading the given Flash Dump File
2. STB Remote and Logo may change at your own choice
3. Money saving instead of changing the mainboard
4. Time-saving instead of arranging a new board
5. The customer satisfaction to do an urgent job by installing the flash file

Cons:

There may be some disadvantages to installing the given NEXT YE-2000 HDCX receiver USB software or flash dump file. A few drawbacks are described below:

1. The working receiver may go to the standby position or dead
2. The Original Remote Control may not work and the Logo may change by writing the given Flash File
3. All the channel data and TPs data may washed

Note:

Below given the NEXT YE-2000 HDCX receiver software is a backup dump file and can be loaded with a Programming tool or with a Loader tool in the dead receiver or can be upgraded SPI Flsh Memory or downgraded to the older version in the normally working satellite receiver with the USB Upgrade procedure or by the RS232 Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the software. Always keep a backup before loading the USB software or writing SPI flash memory.

NEXT YE-2000 HDCX dump file for free download.

PREMIUM 22900 PLUS Satellite Receiver

PREMIUM 22900 PLUS dump file or Flash file is a basic boot instructions and information software program for a receiver written on the satellite receiver’s EEPROM or Flash IC or Memory IC. PREMIUM HD 22900 PLUS is HEVC H.265 supported with 10-bit optimized color. It is a Digital DVB3 S2 satellite receiver with a WiFi dongle supported. It has an RS232 port for Software Upgrade, an RJ45 port for wired internet, RCA output, and USB input.

Sometimes the Memory IC or SPI Flash of the PREMIUM 22900 PLUS satellite receiver is imperfect due to technical errors or Its built-in firmware/program crashes because of a mistake then the System IC Controller does not get any boot instructions or basic information and the satellite receiver does not turn on. In this situation, we need to reprogram the flash ic with the matched hardware dump/flash file to get the receiver in normal condition. The dump file of PREMIUM 22900 PLUS is given below for technician/user support.

Information and Specifications:

Manufacturer: PREMIUM HD

Box Model: 22900 PLUS

Main Board:

Main Controller or Chipset: ALI

Box Type: Digital

Flash Type: SPI SOP8/SOIC8

Flash Size: 4 Mb

Software Type: Backup Dump

Software Size: Mb

Download File Format: ZIP

Download Type: Free

Attention: 

All the pictures and specification details related to the PREMIUM 22900 PLUS receiver in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without installing the Flash Dump File. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

PREMIUM 22900 PLUS Receiver Version Upgrade:

Please note that the installed version in this board is the final version to operate the receiver normally. Mostly the manufacturer releases updates to fix the bugs in the previous version or adds some new features and applications for customer satisfaction and smooth working of the receiver. So, keep in mind to always save the backup of channels and TPs first. Keep the receiver connected with UPS while updating the new software version. Always follow the given instructions while upgrading to avoid any issues:

1. First of all, choose the appropriate version of the matching software upgrade
2. Connect the receiver or STB box with an Uninterrupted Power Supply
3. Save the backup of the flash file first to use it later if necessary
4. Keep the customized channel data
5. Get all the TPs or satellite list backup data

Pros:

There are many advantages to installing the given PREMIUM 22900 PLUS receiver USB software or flash dump file. A few benefits are described below:

1. The dead receiver can be recovered and operational by loading the given Flash Dump File
2. STB Remote and Logo may change at your own choice
3. Money saving instead of changing the mainboard
4. Time-saving instead of arranging a new board
5. The customer satisfaction to do an urgent job by installing the flash file

Cons:

There may be some disadvantages to installing the given PREMIUM 22900 PLUS receiver USB software or flash dump file. A few drawbacks are described below:

1. The working receiver may go to the standby position or dead
2. The Original Remote Control may not work and the Logo may change by writing the given Flash File
3. All the channel data and TPs data may washed

Note:

Below given the PREMIUM 22900 PLUS receiver software is a backup dump file and can be loaded with a Programming tool or with a Loader tool in the dead receiver or can be upgraded SPI Flsh Memory or downgraded to the older version in the normally working satellite receiver with the USB Upgrade procedure or by the RS232 Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the software. Always keep a backup before loading the USB software or writing SPI flash memory.

PREMIUM 22900 PLUS dump file for free download.

NEXT 2000 Wi-Fi Satellite Receiver

NEXT 2000 Wi-Fi dump file or Flash file is a basic boot instructions and information software program for a receiver that is written on EEPROM or Flash IC or Memory IC of the satellite receiver. When powered on the main processor/Microcontroller retrieves the information from memory to know how to work/boot if fails to get the boot information then it may stuck on the power/red light or boot logo screen.

Sometimes the Memory IC or SPI Flash of the NEXT 2000 Wi-Fi satellite receiver is imperfect due to technical errors or Its built-in firmware/program crashes because of an error then the System IC Controller does not get any boot instructions or basic information and the satellite receiver does not turn on. In this situation, we need to reprogram the flash ic with the matched hardware dump/flash file to get the receiver in normal condition. The dump file of NEXT 2000 Wi-Fi is given below for technician/user support.

Information and Specifications:

Manufacturer: NEXT

Box Model: 2000 Wi-Fi

Main Board: 23000-00019 20201208

Main Controller or Chipset:

Box Type: Digital WiFi

Flash Type: SPI SOP8/SOIC8

Flash Size: 8 Mb

Software Type: Backup Dump

Software Size: Mb

Download File Format: ZIP

Download Type: Free

NEXT 2000 Wi-Fi Receiver Version Upgrade:

Please note that the installed version in this board is the final version to operate the receiver normally. Mostly the manufacturer releases updates to fix the bugs in the previous version or adds some new features and applications for customer satisfaction and smooth working of the receiver. So, keep in mind to always save the backup of channels and TPs first. Keep the receiver connected with UPS while updating the new software version. Always follow the given instructions while upgrading to avoid any issues:

1. First of all, choose the appropriate version of the matching software upgrade
2. Connect the receiver or STB box with an Uninterrupted Power Supply
3. Save the backup of the flash file first to use it later if necessary
4. Keep the customized channel data
5. Get all the TPs or satellite list backup data

Pros:

There are many advantages to installing the given NEXT 2000 Wi-Fi receiver USB software or flash dump file. A few benefits are described below:

1. The dead receiver can be recovered and operational by loading the given Flash Dump File
2. STB Remote and Logo may change at your own choice
3. Money saving instead of changing the mainboard
4. Time-saving instead of arranging a new board
5. The customer satisfaction to do an urgent job by installing the flash file

Cons:

There may be some disadvantages to installing the given NEXT 2000 Wi-Fi receiver USB software or flash dump file. A few drawbacks are described below:

1. The working receiver may go to the standby position or dead
2. The Original Remote Control may not work and the Logo may change by writing the given Flash File
3. All the channel data and TPs data may washed

Note:

Below given the NEXT 2000 Wi-Fi receiver software is a backup dump file and can be loaded with a Programming tool or with a Loader tool in the dead receiver or can be upgraded SPI Flsh Memory or downgraded to the older version in the normally working satellite receiver with the USB Upgrade procedure or by the RS232 Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the software. Always keep a backup before loading the USB software or writing SPI flash memory.

NEXT 2000 Wi-Fi dump file for free download.

NIA AN-777 Satellite Receiver

NIA AN-777 dump file or Flash file is a boot information data with software/program of a satellite receiver which is located at EEPROM or Flash IC or Memory IC of the receiver. The main processor/Microcontroller retrieves the information from memory when it is powered on to know how to work/boot. If fail to get the boot information then it may stuck on the power/red light or boot logo screen.

If the Flash IC/Memory IC of the NIA AN-777 receiver is damaged for any reason or Its software/firmware malfunctions due to any reason then the Main Controller does not get any boot/basic information and the satellite receiver does not turn on. In this situation, we need to reprogram the flash ic with the matched hardware dump/flash file to get the receiver in normal condition. The dump file of NIA AN-777 is given below for technician/user support.

Information and Specifications:

Manufacturer: NIA

Box Model: AN-777

Main Board: JNMB7T0005

Main Controller or Chipset:

Box Type: Digital

Flash Type: SPI SOP8/SOIC8

Flash Size: 4 Mb

Software Type: Backup Dump

Software Size: Mb

Download File Format: ZIP

Download Type: Free

Note:

Given receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with the STB Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the software.

NIA AN-777 dump file for free download.

SSTRONG SRT-4990X Satellite Receiver

SSTRONG SRT-4990X dump file or Flash file is a boot information data with software/program of a satellite receiver which is located at EEPROM or Flash IC or Memory IC of the receiver. The main processor/Microcontroller retrieves the information from memory when it is powered on to know how to work/boot. This is a wonderful satellite receiver with a large-size flash ic 8MB and it can support 1080 Full HD resolution. It can also Supports 4k, in addition to 1500 Arabic channels arranged on Nilesat With an advanced satellite finder.

It has a free Smart Server for All sports and international channels, working inside and outside Iraq and in the Kurdistan Region at the weakest internet speed. Any boot/basic information and the satellite receiver are not turned on. In this situation, we must reprogram the flash ic with the matched hardware dump/flash file to get the receiver in normal condition. The dump file of SSTRONG SRT-4990X is given below for technician/user support.

Information and Specifications:

Manufacturer: SSTRONG-4K

Box Model: SRT 4990X

Main Board:

Main Controller or Chipset:

Box Type: Digital

Flash Type: SPI SOP8/SOIC8

Flash Size: 8 Mb

Software Type: Backup Dump

Software Size: Mb

Download File Format: ZIP

Download Type: Free

SSTRONG SRT-4990X Receiver Version Upgrade:

Please note that the installed version in this board is the final version to operate the receiver normally. Mostly the manufacturer releases updates to fix the bugs in the previous version or adds some new features and applications for customer satisfaction and smooth working of the receiver. So, keep in mind to always save the backup of channels and TPs first. Keep the receiver connected with UPS while updating the new software version. Always follow the given instructions while upgrading to avoid any issues:

1. First of all, choose the appropriate version of the matching software upgrade
2. Connect the receiver or STB box with an Uninterrupted Power Supply
3. Save the backup of the flash file first to use it later if necessary
4. Keep the customized channel data
5. Get all the TPs or satellite list backup data

Pros:

There are many advantages to installing the given SSTRONG SRT-4990X receiver USB software or flash dump file. A few benefits are described below:

1. The dead receiver can be recovered and operational by loading the given Flash Dump File
2. STB Remote and Logo may change at your own choice
3. Money saving instead of changing the mainboard
4. Time-saving instead of arranging a new board
5. The customer satisfaction to do an urgent job by installing the flash file

Cons:

There may be some disadvantages to installing the given SSTRONG SRT-4990X receiver USB software or flash dump file. A few drawbacks are described below:

1. The working receiver may go to the standby position or dead
2. The Original Remote Control may not work and the Logo may change by writing the given Flash File
3. All the channel data and TPs data may washed

Note:

Below given the SSTRONG SRT-4990X receiver software is a backup dump file and can be loaded with a Programming tool or with a Loader tool in the dead receiver or can be upgraded SPI Flsh Memory or downgraded to the older version in the normally working satellite receiver with the USB Upgrade procedure or by the RS232 Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the software. Always keep a backup before loading the USB software or writing SPI flash memory.

SSTRONG SRT-4990X dump file for free download.