Tag Archives: M6V5.1-C

TOPTECH M6V5.1 Software Free Download

M6V5.1 Universal LCD/LED Board

Basic Info:

Model No. M6V5.1

Main Chipset: TSUMV56RUU-Z1 (Mstar)

Trademark: TOP-TECH

Display Format: up to 1920×1200 @ 60Hz

Aspect Ratio: 4:3, 16:9 & 16:10

M6V5.1_Firmware

 

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel 6/8 bit LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes for Firmware Upgrade and Multimedia Playback Support also

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program to the U disk base on your screen size.

Step 3: Connect the U disk with Mainboard

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again.

Factory Service Mode:

Menu+2580

M6V5.1-C

Note:

M6V5.1-C is NOT compatible with board M6V5.1-A. DO NOT install on M6V5.1-A because will not work.

The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download M6V5.1 Firmware Files:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

M6V5.1 Firmware All resolutions USB updateable for Free Download:

Kazmi-Elecom

error: Content is protected !!