Tag Archives: M260TWR1

TSUX6V2.0-F Universal Board

TSUX6V2.0-F is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.

Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. TSUX6V2.0-F firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: TOP-TECH

Model: TSUX6V2.0-F

Main Chip: TSU26

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 24C32 EN25F40

Sound Chip:

Tuner IC:

Screen supported: -inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Name: .bin

Firmware Type: USB Boot & Backup Dump

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install the software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

TSUX6V2.0-F firmware for free download:

• TOP-TECH_TSUX6V2.0_F_TSU26_1024x768
• TOP-TECH_TSUX6V2.0_F_TSU26_1280x768
• TOP-TECH_TSUX6V2.0_F_TSU26_1280x1024
• TOP-TECH_TSUX6V2.0_F_TSU26_1366x768
• TOP-TECH_TSUX6V2.0_F_TSU26_1440x900
• TOP-TECH_TSUX6V2.0_F_TSU26_1920x1080
• TOP-TECH_TSUX6V2.0_F_TSU26_Others

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.MT8223.3B LCD TV Board

T.MT8223.3B is a Universal LCD/LED Driver Board.

Basic Info:

Model No. T.MT8223.3B

Main Chipset: MT8223

Tuner: F20WT-3DDR-E

Display Format: up to 1080

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out Jack

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

MENU 1147

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MT8223.3B Firmware Free Download :

• T-MT8223-3B 1366×768-HYUNDAI-32
• T-MT8223-3B 1366×768-ISONIC-32
• T-MT8223-3B 1366×768-SUPRA-26
• T-MT8223-3B 1366×768-TXQ-32
• T-MT8223-3B 1366×768-UTECH-32
• T-MT8223-3B 1920×1080-BESAT-42

For video tutorials, visit “Kazmi Elecom” my YouTube channel.