Tag Archives: LG LED TV Service Code

LG LCD LED TV Software Collection

LG LCD LED TV is widely used in the world. Each and Every LG LED TV has its specific program or firmware/software installed in its motherboard by which the tv functions can be operated. Sometimes, In some cases led tv stops working due to technical reasons and is not properly displayed, or the standby light remains red/blue. If the TV did not start normally then we need to reprogram the LED TV with its specific firmware/software.

It is very necessary for us to have the backup dump of that LED TV to restore the tv to normal condition. So, here are some backup dump files of LG LED TV firmware for free Download to support the technicians. Download free LG bin files for your LCD/LED TV.

All following given firmware of LG LCD LED TV is saved with programming tool and can be loaded into tv with the programmer. Each LED TV Model has its own specific Software File that you can download for a specific model. It is advised to all beginners that first save the backup of the old software before installing new software or remove the original flash IC and load the software in a new flash ic then mount it. In case of any trouble, you can replace back the original flash ic to avoid any issues.

LG LCD LED TV boards do not have the option of Mirroring/Flip or inverting the function setting of the panel. So, if the picture is inverted or flipped then you should load the software of the upside-down picture. Some software in the given list is bifurcated and some or not. you may check it by yourself if you face such types of problems during the software installation.

In some cases, the main motherboard is the same but the channel scanning issue is observed. It is because the different tuner is mounted on the same board. So, you need to first verify the tuner ic part number to load the proper firmware.

Note: 

All software files are saved from working LG LCD LED TVs with the help of the Programming tool and can be loaded or written by the programmer. Some firmware files are USB upgradeable.

Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/Installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download LG LCD LED TV Firmware Files:

1. Click on the Search box available top right corner of the webpage.
2. Type your desired model number.
3. Click on the search result below.
4. Read the post you will get the download link.
5. If your desired model is not shown in the search results then comment.

Visit my Youtube Channel and watch several video tutorials for a better understanding.

TP.V56C.PB819 LCD/LED TV Board

TP.V56C.PB819 is an analog LCD/LED TV ATV control card that is designed especially for Asian countries and the Middle East as well. TP-V56C-PB819 is a combo, three-in-one card with Dual AV that is designed for the power supply unit and Inverter board with ATV Module three in one embedded board. TP_V56C_PB819 supports 24 to 37-inch screens up to a resolution of 1920×1080.

General Specifications:

Brand/Mark: China Universal

Model: TP.V56C.PB819

Main Chipset: V56

Product: LED TV Driver Board

Resolution: Up to 1920×1080

Panel: 24″ to 37″

Panel voltage: 12V

Input Supply: 100 to 240V AC

Motherboard power: 48W

Backlight: 45-63V 25w

Backlight current: 480mA

Speaker Output: 2x5W(8ohm)

Service Code: Menu+1147

For updating software, you can use not only the USB interface but USB interface also the ability to play Movies/music/photos, Many formats are supported.

How to Programm:

1. Copy the required program or software to the USB-Disk drive
2. Insert the USB flash drive into the USB interface port on the main board
3. Connect the keyboard and power on the switch, until you see the indicator on the keyboard flashing in red and green, until the indicator flashing stops then turn off the power, then Pull out the USB flash drive, and power it on.

Note: 

All Backup or Dump files can be loaded by the programmer. Can not upgrade by USB interface. All files are tested by myself. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

TP.V56C.PB819 firmware free download:

For video tutorials, visit my youtube channel.