LEG N24 PRO Satellite Receiver
LEG N24 PRO is a Full HD Digital Satellite Receiver with the best performance, outstanding signal reception, and excellent picture quality. The N24-Pro receiver is DVBS/S2 Compliant. The main chipset 1506T is used in this receiver and the RAM capacity is 512 MB while the ROM is 4MB (SPI Flash Memory). N24-Pro receiver has a Single Tuner with Loop-Out. It can Support Mpeg-2, Mpeg-4, and H.264 video formats. The N24-Pro receiver is a Fully HD 1080p compliant box. It can be upgraded with the RS232 interface by the Loader Tool.
LEG N24 PRO can Support the Diseqc switch and RF out modulator. The N24-Pro can Support E-vision IPTV also. The N24-Pro receiver has some extra features such as supporting PowerVU, YouTube application, Cccam, and Newcam. The N24-Pro New receiver launched with a 6-month pre-loaded Tcam Account and a 12-month pre-loaded Dqcam Account. The flash size of The N24-Pro receiver is 4MB and the Dump backup that is shared in this post below is also 4mb that can support the technician to recover the dead or standby N24-Pro receiver.
General Information:
Manufacturer: LEG
Box Model: N24 PRO
Main Board: 1506T
Main Controller or Chipset: 1506T
Hardware Version: DVBS-1506T-V1.0-OTP
Software Version: SGF1 V11.03.05-2
Loader: Sun-Plus 1506T/F
Box Type: Digital Full HD
Flash Type: SPI SOP8/SOIC8
Flash Size: 4 Mb
Software Type: Backup Dump
Software Size: Mb
Download File Format: ZIP
Download Type: Free
Technical Specifications and Features:
- DVBS/S2 Compliant
- Support E-vision IPTV
- Single Tuner with Loop-Out
- Support Mpeg-2, Mpeg-4, H.264
- Fully HD 1080p compliant
- Support Diseqc switch
- Support RF Out Modulator
- Support PowerVU
- Support YouTube
- Supports Cccam and Newcam
- Tcam Account 6-month pre-loaded
- Dqcam Account 12month pre-loaded
- Supported RS232
How to Load with Programmer:
- Download the given LEG N24 PRO Dump file
- Unzip the file to the folder
- Copy the bin file to the USB disk or keep it on the hard disk
- Remove the Flash IC from the Receiver PCB board
- Connect the programming tool
- Put the Flash ic on the Programmer
- Write the Flash ic with the required dump file
- Resold it back to the receiver motherboard
- On the receiver Now it’s working
Note:
The LEG N24 PRO receiver software provided below is a backup dump file. It can be loaded using a programming tool or a loader tool on a non-functional receiver, or it can be used to upgrade or downgrade the SPI Flash Memory of a functioning satellite receiver through the USB upgrade process or the RS232 upgrade tool. Please note that the Kazmi Elecom Team is not liable for any damage or loss that may occur from uploading or downloading the software. Always ensure you have a backup before loading the USB software or writing to the SPI flash memory. For more Dump Files Visit Here.
