Tag Archives: led tv software free download

DS.V53RL.BK LCD/LED TV Board

DS.V53RL.BK is an analog TV control board, which is suitable for Asia-pacific and middle-east markets.
DS.V53RL.BK’s USB slot can be used for updating software and playing multimedia, such as MP3 and JPEG. DS.V53RL.BK’s HDMI support for the scheme is 1.3/1.4, HDCP1.2 compliant.

General Specifications:

Model: DS.V53RL.BK

Main Chipset: TSUMV53RUUL

OSD Language: English, Chinese

Panel Type: TFT LCD With LED Backlight

Panel Interface: 1ch/2ch 6bit/8bit LVDS Interface

Max Resolution: 1920×1080

Power to To Panel: 3.3V/5V/12V

Video System: PAL, SECAM, NTSC

Sound System: BG,DK,I,L,M,N NICAM/A2

Max Audio Output Power: 2×3W

Power DC Input Voltage: 12VDC±0.6V 4Amp

Standby Power Consumption <0.3 W (Board Only)

Max current of USB: 500mA

Supported Resolutions:

• 640×480
• 800×600
• 1152×768
• 1280×720
• 1280×800
• 1280×854
• 1280×960
• 1280×768
• 1600×1200
• 1680×1050
• 1680×1080
• 1920×1200
• 1400×1050
• 1024×600
• 1024×768
• 1280×720
• 1366×768
• 1920×1080
• 1280×1024
• 1440×900

How to Load Software:

1. C copy the L53BK1. Bin on a USB flash drive.
2. Set the voltage on board (this is according to your screen input voltage: 3.3 V / 5 V / 12 V)
3. Connect the U disk to the board, and connect the 7 key, then connect the power adapter, and turn it on. Then you can see the light on the keyboard will flash. This means that the board installs the program. (Do not turn off the power at this time!)

4. After a few minutes, the LED will stop flashing, the middle end. Then turn off the power, pull out the USB, then connect the lvds cable and the inverter. Power on. Then the screen shows blue, and you can connect to the HDMI or VGA signal.

Note:
The voltage must be set correctly (3.3 V / 5 V / 12 V); Do not turn off the power when installing the program; The screen line does not rotate and does not move.

Factory Mode:

Menu+1147

Note: The following firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

Here are below DS.V53RL.BK firmware all resolution USB updateable for free download:

GSD59ITO-V1.0 Universal LED TV Board

Basic Info:

Model No. GSD59ITO-V1.0

Main Chipset: TSUMV59XU-Z1

Tuner Chip: R840

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Board Size: 168.00 X 42.0 (mm)

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Factory Setting Mode:

Menu+1147 Or Input+2580

Note:

If you are new and do not have enough knowledge of loading or installing software/firmware or dumping files then read here first.

How to Download:

Download your required software and then extract it you will get the folder. Now copy the files to USB or load them with Programmer. For More Detail about the download process, watch the video Click Here

GSD59ITO-V1.0 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Ecostar CX-32U575 A+ LED TV

Ecostar CX-32U575 A+ is a 32 inches HD Ready LED TV with a resolution of 1366×768. CX-32U575 A+ is a non-smart tv. CX-32U575 A+ led TV has all the latest features and connectivity ports such as an HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1. Its view angle is horizontal: 170 degrees and vertical: 160 degrees.

CX-32U575 A+ has additional edge-led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2, and response time is 5 ms. Ecostar firmware file is given below for the technician’s support. For more Ecostar software collection visit here.

General Specifications & Features:

Make: Ecostar

Model: CX-32U575

Display Size: 32″

Storage Memory: 4 MB

HD Technology: HD Ready

Panel: HD

No of HDMI Ports: 2

No of USB Ports: 1

No of AV Ports: 1

Speaker Output RMS: 10W (5W*2)

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: 55 W, 0.5 W (Standby)

Firmware Type: Backup Dump

Firmware Name: NA

Main Board: V53M5C2

Ecostar CX-32U575 Price:

This model is now discontinued. Maybe you can find it in old stock. The price of this LED TV is approximately USD 160 but keeping in mind the price should be varied according to the dollar rate in Pakistan. convert the dollar rate in rupees to get the approximate price in PKR.

Note: Following given firmware is a backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware.

Ecostar CX-32U575 software file free download:

For Video Tutorials Visit my youtube Channel

T.R85.A81 Universal LED TV Board

Basic Info:

Model No. T.R85.A81

Main Chipset: RDA 8501

Trademark: CXEL

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

Board Size: 168.00 X 42.0 (mm)

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required resolution Firmware/software in FAT32 USB Disk
2. insert the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led stops flashing
4. Done. Unplug the Udisk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following given software/firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

T.R85.A81 Firmware All resolutions Free Download Here :

• T-R85-A81-1024X768-Firmware-USB
• T-R85-A81-1280X1024-Firmware-USB
• T-R85-A81-1366X768-Firmware-USB
• T-R85-A81-1400X1050-Firmware-USB
• T-R85-A81-1440X900-Firmware-USB
• T-R85-A81-1600X900-Firmware-USB
• T-R85-A81-1600X1200-Firmware-USB
• T-R85-A81-1680X1050-Firmware-USB
• T-R85-A81-1920X1080-Firmware-USB
• T-R85-A81-1920X1200-Firmware-USB

LAD.MV56U LED TV Controller Board

LAD.MV56U.A48 is an analog LCD/LED TV Combo Control Board with Power Supply and LED Driver with ATV Module. LAD_MV56U_A48 is designed for Asia-Pacific and the Middle-East market. Its USB slot can be used for updating software and playing multimedia files such as MP3, MP4, and JPEG. The Power Supply part is Energy-Efficient. Ultra-thin DC line switching power supply unit is with 48 watts Multi-Output which can support led backlight TFT Panels from 28″ to 32″.LAD-MV56U-A48 supports maximum resolution up to 1920×1080.

LAD.MV56U.B48 is also an analog TV Control Board with an integrated power supply, constant current backlight driver board, and ATV Module.LAD_MV56U_B48 is also suitable for 28 to 32″ screen panels with a maximum resolution supported is 1920×1080. LAD-MV56U-B48 is a powerful function of multimedia playback. It can play Most Multimedia files through the USB interface and supports Full HD 1080p Video.

This Board is also available in different versions like:

LAD-MV56U-A36

LAD-MV56U-A48

LAD-MV56U-A75

LAD-MV56U-B48

LAD-MV56U-C36

General Specifications:

Brand/Mark: China Universal HD Three in One Board

Model: LAD-MV56U-A36, LAD-MV56U-A48, LAD-MV56U-A75, LAD-MV56U-B48, LAD-MV56U-C36

Main Chipset: TSUMV56RUU and TSUMV56RUE, TSUMV56RUU-Z1

Product: LED TV

LED Backlight Current: 300mA*2

Flash IC: 4Mb

Screen supported: 32-42 inch

Resolution: Up to 1920×1080

Power Supply: 100V~240V AC

Panel Power: 12V

Standby Power Consumption: <0.5W

Frequency Range: 47Hz To 63 Hz

Service Code:

Menu+1147

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

Here are below some LAD.MV56U firmware for free download:

TP.RD8503.PB819 Triple TV Board

TP.RD8503.PB819 is a Three-In-One LCD/LED TV Motherboard that is designed for especially 32-inch screens. TP_RD8503_PB819 is a combo board that is three modules built in into a single piece of PCB like a power card, Backlight driver controller, and ATV Module. TP-RD8503-PB819 is a universal Board that is compatible with many panel screens. TP RD8503 PB819 is a Universal Combination Main Boards that can be used for a variety of different television models, including JVC, TELEFUNKEN, ULTRASONIC, AIM, TEK, HISENSE, and many others.

General Basic Info:

Brand/Mark: China Universal

Model: TP.RD8503.PB819

Main Chip: RDA8503

TV System: PAL\SECAM\NTSC

Product: LED TV

Input Voltage: 220V AC

Backlight Current: 350MA/480MA

MAX Backlight Watt: 25W

Backlight voltage: 45-63V

Size : 146*128mm

Resolution: 30-39 ” PANEL

Service Menu:

Menu 1147/Menu 2008

USB Upgrade Method:

• Plug the U disk into the USB port.
• Insert the AC cord and the machine go to standby status, then it will begin to update the SW, it will take you about 30 seconds to complete the whole update.
• There is one feature when it updates, like below:
  The led will twinkle, it will be red, green, red, green slowly, then change quickly, then the led change to red, TV power on itself.

Note: Following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download firmware file:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

Here are below some TP.RD8503.PB819 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Skr.819 Three-In-One TV Motherboard

SKR.819 is an analog LCD/LED TV ATV control card that is designed especially for Asian countries and the Middle East as well. SKR_819 is a combo, three-in-one card with Dual AV that is designed for the power supply unit and Inverter board with ATV Module three-in-one embedded board. This board supports 24 to 37-inch screens up to a resolution of 1920×1080.

General Specifications:

Brand/Mark: China Universal

Model: SKR.819

Main Chipset: RDA8501

Product: LED TV Driver Board

Resolution: Up to 1920×1080

Panel: 24″ to 37″

Panel voltage: 12V

Input Supply: 100 to 240V AC

Motherboard power: 48W

Backlight: 30-60V 25w

Backlight current : 350mA

Speaker Output: 2x5W(8ohm)

Service Code: Menu+1147

For updating software, you can use not only the USB interface but USB interface also the ability to play Movies/music/photos, Many formats are supported. You can also set boot images or logo.

How to Programm:

1. Copy the required program or software to the USB-Drive
2. Insert the USB flash drive into the USB port on the main board
3. Connect the keyboard and power on electricity, until you see the indicator on the keyboard after flashing in red and green, until the indicator flashing stop then turn off the power, then Pull out USB flash drive, and power on.

Note: Following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download firmware file:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

SKR.819 firmware free downloads:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

SKR.819

CV59L Universal LCD/LED Board

CV59L is a universal LCD/LED TV control board that is Applicable to 15-32 Inch LCD/LED TV panels. Three-In-One Motherboard CV-59L is suitable With Any Screen.CV_59L Board has different versions with the same chipset as v59. Some of the Board names are given below:

• CV.59L-A
• CV.59L-C
• CV.59L-D
• CV.59L-E
• CV.59L-F
• CV.59L-G
• CV.59L-J
• CV.59L-K
• CV.59L-L

Description:

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

CV59L firmware for free download:

Smart LED TV Mstar Android Recovery. Recover Boot Loop Smart LED TV without Loading Software

Z.VST.3463.A1 Universal DVB-T2 TV Board

Z.VST.3463.A is a digital DVB-T2/DVB-T/DVB-C TV control board, which is suitable for the Europe market. Z.VST.3463.A1 is a digital DVB-T2/DVB-T/DVB-C TV driver board for the European market. Its USB slot can be used for updating software and playing multimedia, such as MP3 and JPEG. The solution’s USB interface is available for software upgrades and multimedia playback. HDMI1.3/1.4 compliant with ARC support, HDCP1.2 compliant. The HDMI-supported version of this solution is 1.3/1.4 compatible with ARC, and HDCP supports version 1.2.

General Specifications:

Model: Z.VST.3463.A1

Main Chipset: MSD3463GU-Z1

Video Input: ATV/DTV

• DVB‐T:COFDM QPSK, 16QAM, 64QAM
• DVB‐T2: COFDM QPSK, 16QAM ,64QAM ,256QAM
• DVB‐C:16QAM,32QAM,64QAM,128QAM,256QAM

Resolution Support: up to 1920×1080

Tuner chip: R840/R842

Panel Volt: 3.3v, 5v, 12v

Terminal Functions: USB ,HDMI , VGA ,AV,PCAUDIOIN, TV , EARPHONEOUT,AV OUT

Key Function: TV/AV,MENU,VOL+,VOL-, CH+,CH-,POWER

OSD Language: English, Spanish, French, etc.

Audio Output: 2×2W(4Ω)/2×8W

Flash Memory: 25Q64CSIG

Power Input: 12v DC

Standby Power Consumption: < 0.3W(Board Only)

Service Menu Code:

Input 2580

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

How to Load Software:

1. Put the firmware of “3463GU_A.bin” in the formatted USB flash disk,  then insert the USB disk into the board
2. After turning on the power, the light of the 7key button will be Red then flash red and blue.
after about 1 minute, the light stops flashing, which means the upgrade has finished.
(Note that write programs do not power outages, crashing won’t be able to use)

Z.VST.3463.A1 firmware of All Resolutions for free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.V56C.01 Universal Board

T.V56C.01 is a universal LCD/LED TV Controller board that is designed for Asian countries. T.V56C.01 supports a high screen resolution of FHD panels. It supports high-resolution 1920*1200 15-32 inch LVDS screens.

Basic Info:

Model No. T.V56C.01

Main Chipset: TSUMV56JUL-Z1

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

T.V56C.01 Firmware All resolutions Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.