Tag Archives: Led Firmware

T.MS6M181.1B Firmware Free Download

T.MS6M181.1B LCD TV Driver Board

T.MS6M181.1B-11223 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 19-inch to 42-Inches LED panels which have a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software upgrades as well. T-MS6M181-1B-11223 has the HDMI port support of 1.4 and its HDCP support of 1.1. T.MS6M181.1B_11223 is compatible with Non-HD and FHD LCD/LED panel screens. T.MS6M181.1B 11223 is widescreen supported and also has a multi-language option. T.MS6M181.1B-11223 has its special feature of  AV.T.MS6M181.1B-10521 software collection is given below for free download.

T.ms6M181.1B_Firmware

General Specifications:

Board Make: China

Board Model: T-MS6M181-1B 11223, T-MS6M181-1B 10521

Main Chipset: MST6E181VS

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Kazmi-Elecom

Note: Following firmware collection is a USB Boot and Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

T.MS6M181.1B Firmware Collection Free Download Here :

Kazmi-Elecom

S.NO.BOARD/DESCRIPTIONDOWNLOAD LINK
1T.MS6M181.1B_All_USB_FirmwareDownload
2T.MS6M181.1B_Daewoo LM32L1S_Backup_DumpDownload
3T.MS6M181.1B_Panda L32F01_Backup_DumpDownload
4T.MS6M181.1B_Panda L32F01_USB_FirmwareDownload
5T.MS6M181.1B_1366x768_KMC_Backup_DumpDownload

CV59H-BPW Software Free Download

CV59H-BPW LED TV Board

CV59H-BPW is a simple ATV Drive Board designed for LCD/LED TVs. This Board is suitable for the Asia Pacific and the Middle East markets. This is not a Combo Board the main power module and LED Backlight Inverter module is required separately while the TV Tuner is placed into this PCB of the motherboard. This has all the features and connectivity interface as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Headphone jack. CV59H-BPW software files are given for the technician’s support.

Cv59H-Bpw

General Specifications:

Brand/Mark: Universal FHD Board

Model: CV59H- DPW

Main Chip: TSUMV59XUS-Z1

Product: LED TV

LED Backlight: NA

Flash IC: 4Mb

Screen supported: 32-40 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Menu+1147

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

CV59H-DPW firmware for free download:

Kazmi-Elecom

S.NO.BOARD/DESCRIPTIONDOWNLOAD LINK
1CV59H-BPW_1366x768_DNS_DUMPDownload
2CV59H-BPW_1366x768_ELENBERG_DUMPDownload
3CV59H-BPW_1366x768_ERGO_DUMPDownload
4CV59H-BPW_1366x768_MEPL_DUMPDownload
5CV59H-BPW_1366x768_MICROMAX_DUMPDownload
6CV59H-BPW_1920x1080_CHANGHONG_DUMPDownload
7CV59H-BPW_1920x1080_CONDOR_DUMPDownload
8CV59H-BPW_1920x1080_ELENBERG_DUMPDownload
9CV59H-BPW_1920x1080_IRBIS_DUMPDownload
10CV59H-BPW_1920x1080_MEPL_DUMPDownload

RR8501.C753A Software Free Download

RR8501.C753A LED TV Board

RR8501.C753A is a standard LCD/LED Driver Controller Board that is suitable for any type of panel. This board is designed for especially the Asia Pacific and the Middle East. This Board has further bifurcations with the same chipset RDA8501. RR8501-C753A is a combo board which means the LED backlight driver board, power supply module, and ATV module are inbuilt in a single piece.

RR8501.C753A has all the connectivity user interfaces such as HDMI, AV, VGA, USB, and RF ports. It is suitable for 24″ to 32 inches screens.

Rr8501.C753A

General Specifications:

Model: RR8501.C753A

Main Chipset: RDA8501

OSD Language: Asia English, Chinese, French, Spanish, Portuguese

Panel Size: Up to 32″

Max Resolution: 1920*1080

Panel Power Voltage: 5V,12V

Interface: Single/Dual LVDS(8bit)

Sound IC: RDA3118

Tuner IC: 5160

Max Audio Output Power: 2x5W

Power Input: 220V AC

Note: The following given software is a backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download firmware files:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

RR8501.C753A Firmware for Free Download:

Kazmi-Elecom

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Unfortunately, Launcher has Stopped. Smart Android LED TV Software Issue:

TP.MS18VG.P77 Firmware Free Download

TP.MS18VG.P77 Firmware Collection

TP.MS18VG.P77-MS82PT is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 19-inch to 42-Inches LED panels which have a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software upgrades as well. TP-MS18VG-P77-MS82PT has the HDMI port support of 1.4 and its HDCP support of 1.1.

TP.MS18VG.P77_MS82PT is compatible with Non-HD and FHD LCD/LED panel screens. TP_MS18VG_P77 MS82PT is widescreen supported and also has a multi-language option. TP-MS18VG-P77-MS82PT has its special feature of  AV.TP.MS18VG.P77-MS82PT software collection is given below for free download.

Tp.ms18Vg.p77_Firmware

General Specifications:

Board Make: China

Board Model: TP.MS18VG.P77 MS82PT

Main Chipset:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download MS82PT Firmware File:

Download your required file of the following MS82PT firmware and then extract it you will get the folder. Now you can write the file with a programming tool. For more Details about the download, process watch the video Click Here

TP.MS18VG.P77-MS82PT Firmware Collection Free Download Here :

Kazmi-Elecom

S.NO.BOARD/DESCRIPTIONDOWNLOAD LINK
1TP.MS18VG.P77 MS82PT_B13273_1366X768_DumpDownload
2TP.MS18VG.P77_DENKA YS-24LED_Backup_DumpDownload
3TP.MS18VG.P77_ERISSON 19LET35_Backup_DumpDownload
4TP.MS18VG.P77_ERISSON 24LET35_Backup_DumpDownload
5TP.MS18VG.P77_FUSION FLTV-24C10_Backup_DumpDownload
6TP.MS18VG.P77_FUSION FLTV-32C10_Backup_DumpDownload
7TP.MS18VG.P77_HYUNDAI H-LED32V19_Backup_DumpDownload
8TP.MS18VG.P77_Meile LE32M12_Backup_DumpDownload
9TP.MS18VG.P77_Merlot LE32M16_Backup_DumpDownload
10TP.MS18VG.P77_Panasonic TH-23A403DX_Backup_DumpDownload
11TP.MS18VG.P77_ROWA Leroy LED32C390_Backup_DumpDownload
12TP.MS18VG.P77_Sansui 28 Inch_Backup_DumpDownload
13TP.MS18VG.P77_Singer SCT24B2500TC_Backup_DumpDownload
14TP.MS18VG.P77_Singer-32 Inch_Backup_DumpDownload
15TP.MS18VG.P77_TCL 19T2100_Backup_DumpDownload
16TP.MS18VG.P77_TCL 24B2520_Backup_DumpDownload
17TP.MS18VG.P77_TCL 24F3300_Backup_DumpDownload
18TP.MS18VG.P77_TCL 32B2600_Backup_DumpDownload
19TP.MS18VG.P77_TCL 32B3700_Backup_DumpDownload
20TP.MS18VG.P77_TCL L24F1590_Backup_DumpDownload
21TP.MS18VG.P77_TCL L32D2720_Backup_DumpDownload
22TP.MS18VG.P77_TCL L32F3309B_Backup_DumpDownload
23TP.MS18VG.P77_TCL LED24F2300F_Backup_DumpDownload
24TP.MS18VG.P77_TCL LED29B2500_Backup_DumpDownload
25TP.MS18VG.P77_TELEFUNKEN TF-LED32S23_Backup_DumpDownload
26TP.MS18VG.P77_TCL 32T3500B_Backup_DumpDownload
27TP.MS18VG.P77_Thomson 32B2600_Backup_DumpDownload

Universal Smart Android Board Installation Guide With Original 40 Inches SONY LED TV

T.R83.A81 Firmware Free Download

T.R83.A81 Universal LCD/LED TV Board

T.R83.A81 is a universal jumper board with multi-resolution panel screen-supported software. This is a non-combo board means no power supply module is built-in in the motherboard. So, a separate Input DC 12 Volt power supply will be required to get it operational. A fixed power supply module is required that can be AC to DC power Kit module or DC Adapter. This board supports all the essential connectivity interfaces for the user’s requirements.

Basic Info:

Model No. T.R83.A81

Main Chipset: RDA 8503C

Trademark: CXEL

Display Format: up to 1920×1200 (FHD)

Screen Panel Supported: up to 26″

Aspect Ratio: 4:3, 16:9 & 16:10

Board Size: 168.00 X 42.0 (mm)

T.r83.A81_Firmware

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

  1. Copy the Required Firmware/software in FAT32 USB Disk
  2. Plugin the U disk into the Mainboard USB port of LCD/LED TV
  3. Switch ON the power and Wait until even the IR indicator led stops flashing
  4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Caution: 

All the pictures and specification details related to T.R83.A81 in this post is for reference only. If you are a user and do not have any experience of repairing then it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different as per the visual observations. So, please do not try it at home.

Pros:

There are many advantages to installing the given T.R83.A81 USB software or backup dump file. A few benefits are described below:

  • The dead board can be recovered and operational by loading the given software backup file
  • Remote and Logo may change at your own choice to satisfy the customer
  • Money saving instead of changing the mainboard
  • Time-saving instead of arranging a new board
  • Customer satisfaction to do an urgent job
  • Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given T.R83.A81 USB software or backup dump file. But it depends on the technician or user as per his understanding. A few drawbacks are described below:

  • The working board may go to the standby position
  • Remote Control may not work and the Logo may change by writing the given software
  • Panel screen parameters may be changedT.r83.A81_Software

T.R83.A81 Version Upgrade:

Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only in case the default software malfunctions due to some bugs then the manufacturer provide the software update. Otherwise, no version update is issued.

T.R83.A81 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications and latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is USB bootable and a backup file that can be loaded by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download T.R83.A81 Firmware File:

Download all parts of the following T.R83.A81 firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

T.R83.A81 Firmware Files Free Download Here :

Kazmi-Elecom

CV59H-C Software Download Free

CV59H-C LED TV Board

CV59H-C is a simple ATV Drive Board designed for LCD/LED TVs. This Board is suitable for the Asia Pacific and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter module are required separately while the TV Tuner is placed into this PCB of the motherboard. This has all the features and connectivity interface as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Headphone jack. CV59H-C software files are given for the technician’s support.

Cv59H-C

General Specifications:

Brand/Mark: Universal FHD Board

Model: CV59H-C

Main Chip: TSUMV59XE-Z1

Product: LED TV

LED Backlight: NA

Backlight Current: mA

Flash IC: 4Mb

Screen supported: 43~65 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Menu+1147

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

CV59H-C firmware for free download:

Kazmi-Elecom

S.NO.BOARD/DESCRIPTIONDOWNLOAD LINK
1CV59H-C_1366x768_ORION_DUMPDownload
2CV59H-C_1920x1080_ARAGON_DUMPDownload
3CV59H-C_1920x1080_NIKAI_DUMPDownload
4CV59H-C_1920x1080_STARSAT_DUMPDownload
5CV59H-C_1920x1080_STAR-X_DUMPDownload

TP.VST59.PA551 Software Free Download

TP.VST59.PA551 Universal TV Board

TP.VST59.PA551 is a non-smart universal LCD/LED TV Combo Controller Board.

Basic Info:

Model No. TP.VST59.PA551 (Combo Board)

Main Chipset: TSUMV59XU-Z1

LED Backlight: 220mA to 300mA

Display Format: 1080 FHD

Panel Supported: 19″ t0 26″

Aspect Ratio: 4:3, 16:9 & 16:10

Tp.vst59.Pa551

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC 220V

Maximum Current: 3000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (*. Bin file) to the U disk.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keypad and IR also

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu+1147

Note The following given firmware is USB bootable and dumps backup files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dumping files then read here first.

How to Download firmware files:

Download the following given firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

TP.VST59.PA551 Firmware Free Download:

Kazmi-Elecom

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV512H-Q42 Software Free Download

CV512H-Q42 LED TV Board

CV512H-Q42 is a simple ATV & DTV Driver Motherboard designed for LCD/LED TVs. CV512H.Q42 board is suitable for the Europe, Asia Pacific and the Middle East markets.CV512H_Q42 is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. CV512H Q42 has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.CV512H-Q42 firmware files are given below for the technician’s support.

Cv512H-Q42

General Specifications:

Brand/Mark: Universal Board

Model: CV512H-Q42

Main Chip:

Product: LED TV

LED Backlight: 63~82V

Backlight Current: 550mA

Flash IC: 8Mb

Screen supported: 28-42 inch

Resolution: Up to 1920×1080

AUDIO: RDA3118E28

Tuner Type: ATV and DTV (DVB-T MPEG4, DVB-C, DVB-T2, DVB-S2)

Tuner: CDT-9NT372-RD60 & CDT-9NS161-RD41

Panel Voltage: 5V, 12V

Power Input: 220V AC

Memory: 8Mb SPI Flash

Service Code:

Source/Input+2580

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

CV512H-Q42 firmware for free download:

Kazmi-Elecom

S.NO.BOARD/DESCRIPTIONDOWNLOAD LINK
1CV512H-Q42_1366x768_AKAI_DUMPDownload
2CV512H-Q42_1366x768_GALATEC_DUMPDownload
3CV512H-Q42_1366x768_HARPER_DUMPDownload
4CV512H-Q42_1366x768_SHIVAKI_DUMPDownload
5CV512H-Q42_1366x768_SUPRA_DUMPDownload
6CV512H-Q42_1920x1080_DEXP_DUMPDownload
7CV512H-Q42_1920x1080_DOFFLER_DUMPDownload
8CV512H-Q42_1920x1080_SHIVAKI_DUMPDownload
9CV512H-Q42_1920x1080_STARSAT_DUMPDownload
10CV512H-Q42_1920x1080_SUPRA_DUMPDownload
11CV512H-Q42_1920x1080_TELEFUNKEN_DUMPDownload

TSUMV59-T8C1 Firmware Free Download

TSUMV59-T8C1 LED TV Driver Board

TSUMV59-T8C1 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 24-inch to 42-Inches LED panels which a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. TUSMV59.T8C1 has multiple HDMI ports that support 1.4 and its HDCP support 1.1. TSUMV59_T8C1 is compatible with Non-HD and FHD LCD/LED panel screens. TSUMV59 T8C1 is widescreen-supported and also has a multi-language option. TSUMV59_T8C1 has its special feature of Dual AV extendable.TSUMV59-T8C1 software collection is given below for free download.

Tsumv59-T8C1_Firmware

General Specifications:

Board Make: China

Board Model: TSUMV59-T8C1

Main Chipset: TSUMV59

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following TSUMV59-T8C1 firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

TSUMV59-T8C1 Firmware Collection Free Download Here :

Kazmi-Elecom

S.NO.BOARD/DESCRIPTIONDOWNLOAD LINK
1TSUMV59-T8C1_1366x768_AOC_Backup_DumpDownload
2TSUMV59-T8C1_1366x768_Backup_DumpDownload
3TSUMV59-T8C1_1366x768_Haier_Backup_DumpDownload
4TSUMV59-T8C1_1366x768_Philips_Backup_DumpDownload
5TSUMV59-T8C1_1920x1080_Ecostar_Backup_DumpDownload
6TSUMV59-T8C1_1366x768_Cobra_Backup_DumpDownload
7TSUMV59-T8C1_1366x768_K320WD6_Backup_DumpDownload
8TSUMV59-T8C1_1366x768_Daewoo_Backup_DumpDownload
9TSUMV59-T8C1_1920x1080_Daewoo_Backup_DumpDownload

TSUMV59-T4C1 Firmware Free Download

TSUMV59-T4C1 LED TV Board

TSUMV59-T4C1 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 24-inch to 42-Inches LED panels which a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. TUSMV59.T4C1 has multiple HDMI ports that support 1.4 and its HDCP support 1.1. TSUMV59_T4C1 is compatible with Non-HD and FHD LCD/LED panel screens. TSUMV59-T4C1 is widescreen-supported and also has a multi-language option. TSUMV59-T4C1 has its special feature of Dual AV extendable.TSUMV59-T4C1 software collection is given below for free download.

Tsumv59-T4C1_Firmware

General Specifications:

Board Make: China

Board Model: TSUMV59-T4C1

Main Chipset: TSUMV59

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

TSUMV59-T4C1 Firmware Collection Free Download Here :

Kazmi-Elecom

S.NO.BOARD/DESCRIPTIONDOWNLOAD LINK
1TSUMV59-T4C1_Intex 3110_Backup_DumpDownload
2TSUMV59-T4C1_Telefunken LED32S34_Backup_DumpDownload
error: Content is protected !!