Tag Archives: lcd/led software free download

Philips LCD/LED TV Software Collection

Philips LED TV is widely used in Pakistan. Each and Every Philips LED TV has its specific program or firmware/software installed in its motherboard by which the TV functions can be operated. Sometimes, In some cases led TV stop working due to technical reasons and does not properly display or the standby light remains red/blue. If the TV did not start normally then we need to reprogram the LED TV with its specific firmware/software.

It is very necessary for us to have the backup dump of that LED TV to restore the TV to normal condition. So, here are some backup dump files of Philips LED TV firmware for free Download to support the technicians. Download free Philips bin files for your LED TV. If you are facing some issues during software installation then read here first.

All following given firmware of Philips LED TV is useable and dump files are backed up with a programming tool and can be loaded into the tv with the programmer. Each LED TV Model has its own specific Software File that you can download for a specific model. It is advised to all beginners that first save the backup of the old software before installing new software or remove the original flash IC and load the software in the new flash ic then mount it. In case of any trouble, you can replace back the original flash to avoid any issues.

Philips LED TV boards do not have the option of Mirroring/flipping or inverting the function setting of the panel. So, if the picture is inverted or flipped then you should load the software of the upside-down picture. Some software in the given list is bifurcated and some or not. you may check it by yourself if you face such type of problems during the software installation.

In some cases, the main motherboard is the same but the channel scanning issue is observed. It is because the different tuner is mounted on the same board. So, you need to first verify the tuner ic part number to load the proper firmware.

Note: 

All Dump files are saved from working Philips LED TVs with the help of the Programming tool and can be loaded or written by the programmer. These firmware files may not support the USB upgrade method.

Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/Installing the firmware.

How to Download:

Download the following given firmware and extract/unzip. Now copy the file to USB. for More Detail about the download process watch the video Click Here

Philips LED TV Firmware For Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Universal Smart Android Board Installation Guide With Original 40 Inches SONY LED TV

P130-338 V6.0 Smart Board Firmware

P130-338 V6.0 is a high-speed network universal driver board with an FHD resolution of 1920×1080. It is dedicated to 32″ to 46″ screens. has a powerful wifi system. Smart FHD TV features With Android Platform and great features to entertain Full HD Wide Screen with better to work SMART feature. P130-338-V6.0 Smart Board has multiple ports of A/V, USB interface Ports, and many HDMI ports as well in addition to VGA and Headphones also.

P130_338_V6.0 has a LAN/RJ45 Ethernet Connector interface port also for the wired/cable internet network. P130 338 V6.0 is a Combo high-speed Network triple-play motherboard that has the  ATV, Backlight Driver Board, and Power Supply Module built-in in it. The Video and Sound quality of the P130-338-V6.0 Android board are very good and the Response rate is very efficient. P130.338.V6.0 China smart network board has an Android 4.4 version.

There are the following three types of different versions.

• P130-338 V6.0
• P130-338 V6.1
• P130-338 V6.2

Specifications & Features:

Brand/Mark: FHD Smart LED TV Main Board

Main Board Model: P130-338 V6.0

Main Chipset:

OSD Language: English

Interface: Single/Dual LVDS

Tuner:  ATV&DTV

Operating System: Android 4.4

CPU: 4 Core A7

CPU Frequency: 1 GHz

GPU: multi-core Mali-450MP2

GPU Frequency: 500MHz

Ram: 512 Or 1Gb (Optional)

Rom: 4 Or 8 Gb eMMC (Optional)

Backlight: 400 to 900ma

Audio Output: 2x8w

Resolution: up to 1920×1080 (32” to 46″) can support up to 40 ” to 60 ” LED-backlit LCD screen

Panel Power: 12V

Power Input: 100-240V AC 130W

Firmware File: messi.bin

Firmware Type: USB Upgradeable, P130-338 V6.0 bin file

Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of your required resolution and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch video Click Here

P130-338 V6.0 firmware for free download:

Haier 39 Inch Smart LED TV (LE40K6500AG)

Haier LE40K6500AG is Full HD Smart LED TV has a resolution of 1920*1080 which shows clearer, smoother pictures with real-life. Haier LE-40K6500AG brings you into an intelligent world with an Android operating system and WIFI connectivity. You can also view and enjoy your mobile content on your LED TV Big Screen. Haier_LE_40K6500AG improves the efficiency With the WIFI function, multi-screen sharing and controlling via TV, Computer and smartphone are so easy.

It is very simple to browse and enjoy digital media directly from USB flash drives. Its HDMI interface allows you to connect your entertainment gadgets to LED and conveniently switch to each device & have enjoyable multimedia experience. Haier LE40K6500AG Smart LED TV launched in India. The Haier LE40K6500AG firmware file is given below for the technician’s support.

General Specifications:

Brand/Make: Haier Smart TV

Model: LE40K6500AG

Display Size: 39″

Screen Type: Flat
Screen Resolution: Full HD Resolution, 1920 x 1080 pixels
Refresh Rate: 60 Hz
Aspect Ratio 16:09
Noise Reduction: Yes
Comb Filter: Yes
Total Speaker Output: 16w (8W*2)
Automatic Volume Control: Yes
Headphone Output: Yes
Smart TV: Yes

Smart TV Platform: Android 7.0

Wi-Fi: Yes Builtin
USB Ports: 3
HDMI Ports: 2
Ethernet/LAN Port: Yes
Voltage Requirement: AC 100 – 240 V
Power Consumption: 76 watt
Power Consumption (Stand-by): 0.5 watt

Firmware Type: USB upgradeable

Firmware Name: allupgrade_5510_8G_1G_ref55.pkg

Main Board: TP_MT5510I_PB732

Note: The following given firmware/software is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given software/firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

Haier LE40K6500AG firmware for free download:

• Haier-LE40K6500AG-Firmware-USB.part1
• Haier-LE40K6500AG-Firmware-USB.part2

CV6308H-C 4K LED TV Board

CV6308H-C is 4K UHD LED TV driver board which a support resolution of 3840×2160. CV6308H_C is dedicated to 50/60 Hz screens. UHD TV With features to entertain ultra HD Wide-Screen. CV6308H_C has the full features of input interface connectivity. It has multiple ports like HDMI, AV, Headphone, VGA interface, Scart, Coaxial Out, USB ports and RJ45 Ethernet port for wired internet connectivity. Its USB interface can be used for Firmware upgrade and as well as for multimedia playback.

CV6308H.C is a digital and analog TV board, it can receive the analogtelevision (PAL/SECAM) and digital television (DVB-T) signal. The CV6308H_C Firmware file is given below for Technician’s support. CV6308H_C Main Board is used for Goodmans G50238DVBT2-LED TV. CV6308H-C is also used for other Brands 4K Ultra HD LED TVs and FHD TVs as well.

CV6308H Mainboard has different models with same chipset like as following:

• CV6308H-A42
• CV6308H-A
• CV6308H-B
• CV6308H-C
• CV6308H-D

Specifications & Features:

Model Name: CV6308H-C

Resolution: 3840*2160

RAM: 128MB DDR3, SDRAM

ROM: 2GB (NAND Flash)

Aspect Ratio: 16:09

Audio Power Output: 16w (8×2)

System: PAL//SECAM

Tuner: DVB-T (MPEG4) Digital Tuner

HDMI: 3

Scart: 1

AV IN: 1 AV

USB Ports: 1

Power Rating: 220V~240V 50Hz/60Hz

Power Consumption: 93Watt

Standby Power: 0.4W

Firmware: MstarUpgrade.bin

Firmware Type: USB Updateable Firmware, CV6308H-C program data USB

Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

Here is below CV6308H-C Firmware files for free download:

Firmware File:

CV6308H_C_1920x1080_Elekta_UAE\ELEKTA_UnitedArabEmirates_Tianle_CV6308H_C_12_PNL_CMI_FullHD_V650HP1_PS1_20160115_1627.rar.zip

CV6308H_C_1920x1080_Hitachi_Iraq\6308H_C_12_AUS_WeiYue_HITACHI_IRAQ_PNL_V500HJ3_PE1_WEIYUE_HD_样机_20151019_1709.rar.zip

CV6308H_C_3840x2160_Sony_Pakistan\2015ALI160803580050_WeiYue_CV6308H_C_12_AUS_IPC_256_128_PNL_V580DJ2_KS5_HD_PAKISTAN_20151204_133.zip

HK-T.RT2982P90 Smart Android TV Board

HK-T.RT2982P90 is a smart android led tv board. It can support maximum resolution up to 1920*1080. HK_T_RT2982P90 is a combo board i.e power card, backlight driver module, and ATV board is builtin into it. HK-T-RT2982P90 has multiple input interface ports like Dual USB, Dual HDMI, Dual AV, VGA port, and LAN port for wired internet connectivity.

HK T RT2982P90 came with some brand LED TVs like Opel LED42V6I and AOC LE32D5322,  LE32D1330. Its USB interface can be used for loading software as well as for playing multimedia files.

General Specifications:

Model: HK-T.RT2982P90

Resolution Supported: 1920×1080

OS: Android 4.4

Ram: 512Mb

Rom: 4Gb

Firmware File: Install.img

Firmware Type: USB upgradeable

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

HK-T.RT2982P90 Firmware for Free Download:

CV338H-U42 Network Android Smart Board

CV338H-U42 is an Android network driver board with an FHD resolution of 1920×1080. CV338H_U42 has a powerful wifi system. Smart FHD TV With Android Platform and great features to entertain Full HD Wide Screen with better-to-work SMART. CV338H U42 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to VGA, Scart, and Earphones. CV338H.U42 has a LAN/RJ45 Connector interface port also for the wired internet network.

CV338H-U42 is a Combo Network Triple play board that has a Digital TV tuner built-in in it. The Graphics and Sound quality of the CV338H_U42 Android board are very good and the Response rate is very efficient. CV338H U42 China smart network board can support up to 46″ screen panels. CV338H-U42 firmware is available for technician support.

General Specifications:

Brand/Mark: China Universal Android WIFI Board

Main Board: CV338H_U42

Main Chipset: MSD6A338

OS: Android 4.4

CPU: Dual Core

Back Light V/C : 65v-80v 560MA

Ram: 512Mb/1GB DDR3 2133M

Rom: 4 Gb eMMC (RDA3118e)

Resolution: up to 1920×1080

Tuner: ATV&DVBT

Firmware: CtvUpgrade.bin

Firmware Type: USB Updateable Firmware

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

Service Code:

Menu+1147

How to Load Software:

1. Transfer the required resolution file into USB Disk
2. Plugin the USB Disk into Main Board
3. Keep Pressing the Standby/Power button and Power on the board
4. Wait until the red light starts flashing
5. Note: USB file must be the name of “CtvUpgrade.bin”

CV338H-U42 Troubleshooting Guide

CV338H-U42 firmware for free download:

Firmware:

T201806072A-CNC-ZENYTH-338H-U42-HV320WHB-N85-600MA-7KEY-6O-MO16000514-20180628173657

CV338H_U42_1920x1080_Telefunken_TF-LED40S81T2S\B-5418_TK1807-079-LE_4019N-CV338H_U42-V400HJ6_PE1_C3-560ma-BMX_WILDRED.zip

CV358H-B42 Firmware

CV358H-B42 is a smart Android FHD Universal LCD LED TV Driver board.

General Specifications:

Brand/Mark: LCD/LED Main Board (Android WIFI Network Drive Board)

Main Board: CV358H-B42

OS: Android 4.4

CPU: Dual Core

Back Light V/C : 65v-80v 560MA

Ram: 1Gb

Rom: 8 Gb eMMC

Resolution: up to 1920×1080

Firmware: CtvUpgrade.bin

Firmware Type: USB Updateable Firmware

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

How to Load Software:

1. Transfer the required resolution file into USB Disk
2. Plugin the USB Disk into Main Board
3. Keep Pressing the Standby/Power button and Power on the board
4. Wait until the led light starts flashing
5. Note: USB file must be the name of “CtvUpgrade.bin”

Here are below some CV358H-B42 firmware for free download:

ONIDA LCD/LED TV Software Collection

Onida LCD/LED TV is widely used in Indian Markets. Each and Every Onida LED TV has its specific program or software/firmware installed in its main Logic board by which the tv functions can be operated. An LED TV program is stored in the Flash IC memory chip. Sometimes, In some cased led tv stop working due to technical reasons and does not properly displays or the standby light remains red/blue. If the TV did not start normally then we need to reprogram the LED TV with its specific firmware/software.

It is very necessary for us to have the backup dump of that LED TV to restore the tv to normal condition. So, here are some USB bootable and backup dump files of Onida LED TV firmware for free downloads to support the technicians. Download free Onida LED TV bin files for your specific LED TV Model.

Note: 

All software Backup files are saved from working Onida LED TVs with the help of the Programming tool and can be loaded to an LED TV memory IC and written by the programmer. These firmware files may not support the USB upgrade method. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the given firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download your required software and then extract it you will get the folder. Now copy the files to USB or load them with the Programmer. For More Detail about the download process, watch the video Click Here

Onida LCD/LED TV Software For Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.