Tag Archives: LCD Firmware

DD.3663LUA.A81 DVBT Digital TV Board

DD.3663LUA.A81-1-A is a Universal LCD/LED Driver Board that Supports DVB-T2 and DVB-T digital TV. DD.3663LUA.A81 is a universal Controller 3663 that gives the opportunity to build on the base of the laptop or monitor matrix full multimedia TV C T-2 tuner on board without depriving themselves of the opportunity of using it as a monitor. DD-3663LUA-A81 is Suitable for Europe, Africa, The five Central Asian countries, and the Middle East.

General Specifications:

Mark/Model: DD.3663LUA.A81

Main Chip: LUA63A81

TV tuner chip: Rafael R842

Screen Supported: 15-32 inch

Screen Resolution: 1920×1200

Audio Output Power: 2x8W

Video Input: TV: DVB-T / T2, DVB-C, ANALOG TV (ATV), HDMI, VGA, AV IN, YPbPr

Additional Inputs Outputs: Audio mini jack 3.5mm and USB interface

Power Input: DC 12V 4A

Power Consumption: operating mode -> = 6W
Standby mode simple – <0.3W

Factory Mode:

Input 2580

USB slot can be used for updating software and playing multimedia, such as Movie, MP3, and JPEG. Doesn’t support audio AC3 720P, If the sound doesn’t play via USB, You can recode the audio track.

Supported Resolutions:

• 1024X600 6-bit 1 channel
• 1024X768 6-bit 2 channels
• 1024X768 8bit 2ch
• 1024X768 6-bit 1 channel
• 1024X768 8-bit 1 channel
• 1280X768 8-bit 1 channel
• 1280X800 6-bit 1 channel
• 1280X1024 8bit 2ch
• 1366X768 8-bit 2-ch
• 1366X768 8-bit 1-ch
• 1400X1050 6bit 2ch
• 1440X900 8bit 2ch
• 1600X900 8bit 2ch
• 1600X1200 6bit 2ch
• 1680X1050 8bit 2ch
• 1920X1080 8bit 2ch
• 1920X1080 6-bit 2ch

How to Upgrade:

1. Put the firmware of “LUA63A81.bin” in a formatted USB flash disk
2. Insert the USB disk and connect the 7KEY-Button to the board
3. After turning on the power, the light of the 7key button will be Red then flash red and blue. after about 1
   minute, the light stops flashing, which means the upgrade has finished.
4. Note that during writing programs do not power off, crashing won’t be able to use

Note: The following given software/firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download DD.3663LUA.A81 Firmware Files:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

Here are below DD-3663LUA-A81 Firmware of All resolutions for free download:

FS.V53RL.BK LCD/LED TV Board

FS.V53RL.BK is an analog TV control board, which is suitable for Asia-pacific and middle-east markets.
FS.V53RL.BK’s USB slot can be used for updating software and playing multimedia, such as MP3 and JPEG. FS.V53RL.BK’s HDMI support for the scheme is 1.3/1.4, HDCP1.2 compliant.

General Specifications:

Model: FS.V53RL.BK

Main Chipset: TSUMV53RUUL-Z1

OSD Language: English, Chinese

Panel Type: TFT LCD With LED Backlight

Panel Interface: 1ch/2ch 6bit/8bit LVDS Interface

Max Resolution: 1920×1080

Power to To Panel: 3.3V/5V/12V

Video System: PAL, SECAM, NTSC

Sound System: BG,DK,I,L,M,N NICAM/A2

Max Audio Output Power: 2×3W

Power DC Input Voltage: 12VDC±0.6V 4Amp

Standby Power Consumption <0.3 W (Board Only)

Max current of USB: 500mA

How to Load Software:

1. C copy the L53BK1. Bin on a USB flash drive.
2. Set the voltage on board (this is according to your screen input voltage: 3.3 V / 5 V / 12 V)
3. Connect the U disk to the board, and connect the 7 key, then connect the power adapter, and turn it on. Then you can see the light on the keyboard will flash. This means that the board installs the program. (Do not turn off the power at this time!)

4. After a few minutes, the LED will stop flashing, the middle end. Then turn off the power, pull out the USB, then connect the lvds cable and the inverter. Power on. Then the screen shows blue, and you can connect to the HDMI or VGA signal.

Note:
The voltage must be set correctly (3.3 V / 5 V / 12 V); Do not turn off the power when installing the program; The screen line does not rotate and does not move.

Factory Mode:

Menu+1147

Note: The following firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

Here are below FS.V53RL.BK firmware all resolution USB updateable for free download:

INTEX LED-3228 LED TV

INTEX LED-3228 is a 32 inches HD Ready LED TV with a resolution of 1366×768. LED-3228 is a non-smart tv. LED-3228 led TV has all the latest features and connectivity ports such as an HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1. Its view angle is horizontal: 170 degrees and vertical: 160 degrees.

Intex LED-3228 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2, and response time is 5 ms. INTEX Software file is given below for the technician’s support. For more INTEX Software collection visit here.

General Specifications & Features:

Make: INTEX

Model: LED-3228

Display Size: 32″

Storage Memory: 4 MB

HD Technology: HD Ready

Panel: HD

No of HDMI Ports: 1

No of USB Ports: 1

No of AV Ports: 2

Speaker Output RMS: 10W (5W*2)

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: 45 W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name: VST56_4MB_M_60.bin

Main Board: V56-PB842

INTEX LED-3228 Price:

This model is now discontinued. Maybe you can find it in old stock. The price of this LED TV is approximately USD but keeping in mind the price should be varied according to the dollar rate in Pakistan. convert the dollar rate in rupees to get the approximate price in PKR. You can also convert the dollar rate in Indian rupees to get the local currency value.

Note: Following given Software is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.

INTEX LED-3228 Software file free download.

For Video Tutorials Visit my youtube Channel

CV512L-B LED TV Board

CV512L-B is a simple ATV Driver Motherboard designed for LCD/LED TVs. CV512L.B board is suitable for the Asia Pacific and the Middle East markets.CV512L_B is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately to complete the setup and ATV Card is builtin into this motherboard. CV512L B has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.CV512L-B firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CV512L-B

Main Chip:

Product: LED TV

LED Backlight: NA

Flash IC: 8Mb

Sound IC: 1517P

Screen supported: 15-28 inch

Resolution: Up to 1920×1080

Panel Voltage: 3.3V, 5V, 12V

Power Input: 12V DC

Firmware Name: S2_EU.code

Service Code:

Source/Input+2580

Note: The following firmware is USB bootable and dumps backup files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dumping files then read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

Here are below some CV512L-B firmware for free download:

INTEX LED-40FHD10 LED TV

Intex LED-40FHD10-VM  is a 40 inches Full HD LED TV with a resolution of 1920×1080. Intex LED40FHD10 is a non-smart tv. Intex LED-40FHD10  led tv has all the latest features and connectivity ports such as an HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1. Its view angle is horizontal: 170 degrees and vertical: 160 degrees.

Intex 40FHD10 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2, and response time is 5 ms. Intex LED-40FHD10-VM firmware file is given below for the technician’s support. For more INTEX Software collection visit here.

General Features & Specifications:

Brand: Intex

Model: LED-40FHD10-VM

Display Size: 40 inches

Storage Memory: 4 Mb

HD Technology: FHD 1920×1080

Panel: LSC400HM14

No of HDMI Ports: 2

No of USB Ports: 1

No of AV Ports: 2

Speaker Output RMS: 16W (8W*2)

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: 75W, 0.5 W (Standby)

Firmware Type: USB Upgrade

Firmware Name: 6M181_MEISHENG_LSC400HM14_CVMV59SH_U39_BD_CVMV59SH_U39_H700_700mA_20150713142926.bin

Main Board: CV59SH-U39

INTEX LED-40FHD10-VM Price:

This model is now discontinued. Maybe you can find it in old stock. The price of this LED TV is approximately USD but keeping in mind the price should be varied according to the dollar rate in India. convert the dollar rate in rupees to get the approximate price in PKR. You can also convert the dollar rate in Indian rupees to get the local currency value.

Note: Following given Intex LED-40FHD10 firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware.

 Intex LED-40FHD10 Firmware file free download.

For Video Tutorials Visit my youtube Channel

GT.V56.A01 Universal Board

GT.V56.A01 is a universal LCD/LED TV Controller board that is designed for Asian countries with jumper cap setting for all panel VCC. GT_V56_A01 supports a high screen resolution of 1920×1080 panels. GT-V56-A01 is compatible with 15-32″ LVDS screens but does not support all panels.

Basic Info:

Model No. GT.V56.A01

Main Chipset: TSUMV56

Audio: CD1517CP

Support Language: Multi

Display Format: 1080p

Max Resolution : up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Mirror Enable: Yes

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt 4Amp

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software (“GT_V56_RUUL.bin”) in FAT32 USB Disk
2. Plug in the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led flash rapidly
4. Done. Unplug the Udisk (It will take max 1 min to upgrade firmware)
5. It continues to keeps flashing and never stop. This is normal, just wait about 1 minute, this means that the update is complete. Then turn off and turn on also remove the u-disk

Factory Service Mode:

Input 2580, Menu 1147

Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

GT.V56.A01 Firmware Free Download Here :

• GT.V56.A01_1366x768_Samsung_USB

CV512H-U42 LED TV Board

CV512H-U42 is a simple ATV & DTV Driver Motherboard designed for LCD/LED TVs. CV512H.U42 board is suitable for the European markets. CV512H_U42 is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. CV512H U42 has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.CV512H-U42 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CV512H-U42

Main Chip:

Product: LED TV

LED Backlight: 45~100V

Backlight Current: 350mA

Backlight Power: 45W

Flash IC: 8Mb

Screen supported: 32-42 inch

Resolution: Up to 1920×1080

AUDIO: RDA3118E28

Tuner Type: ATV and DTV (DVB-T MPEG4, DVB-C, DVB-T2, DVB-S2) Optional

Tuner: CDT-9NT372-RD60 & CDT-9NS161-RD41

Panel Voltage: 5V, 12V

Power Input: 220V AC

Memory: 8Mb SPI Flash

Service Code:

Source/Input+2580

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

CV512H-U42 firmware for free download:

ONIDA LEO40KYFAIN Smart LED TV

Onida LEO40KYFAIN 40-inch Full HD LED TV has a 1920×1080 resolution display for your viewing pleasure. The Aspect Ratio of this screen is 16: 9 to meet the latest standards and consumes 130 watts of power (when running). Other features of this TV include Display Mirroring, Double USB Sharing, MHL, Screen Mirroring, Smart Share, Smart View, WiFi Direct, and Bluetooth. Also, the total speaker output of this TV is 40 watts. The Onida LEO40KYFAIN firmware file is given below for the technician’s support.

Other smart features supported are MHL, DLNA, Remote Sharing, AllShare, Display Mirroring, Easylink (HDMI-CEC),  Screen Casting, Smartphone connect, SmartShare, SmartView, Swipe & Share, WiFi Direct, Android, Future Ready

General Specifications:

Brand/Make: ONIDA

LED Model: LEO40KYFAIN

Screen Size: 40″

Resolution: 1920×1080

Board:

Android Version: Android 4.4.4

CPU: Quad-Core

GPU:

RAM: 1Gb

Rom: 4/8Gb

Audio Output: 40W

Power Input: 100v-240 v

Power Consumption: 100w

Firmware Type: USB Update

Firmware: MstarUpgrade.bin

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

Onida LEO40KYFAIN firmware for free download:

• ONIDA-LEO40KYFAIN-4G-Firmware-USB.part1
• ONIDA-LEO40KYFAIN-4G-Firmware-USB.part2
• ONIDA-LEO40KYFAIN-8G-Firmware-USB.part1
• ONIDA-LEO40KYFAIN-8G-Firmware-USB.part2

T.MS6M181.6A LCD/LED TV Board

T.MS6M181.6A is a universal LCD/LED Board that has Full HD resolution Supported up to 1920×1080. T_MS6M181_6A is a non-combo board which means the main power supply is required for power input but the ATV board and LED backlight driver board is a built-in single PCB. This can also be operated by a DC 12V input power supply. The firmware files are given below for the Technician’s support. This board has multiple connectivity user interfaces like HDMI, Mini AV Port, Scart, VGA, RF antenna, USB, and Headphone Jack. T.MS6M181.6A Software files are shared in this post for the support of Technicians.

General Specifications:

Board Make: China

Board Model: T-MS6M181-6A 11253, T-MS6M181-6A 12021

Main Chipset: MST6M181VS-Lf-Z1

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V / +3.3V DC (Jumper Setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: Following firmware collection is a USB Boot and Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

T.MS6M181.6A Firmware Collection Free Download Here :

TP.MS6486.PB756 LED TV Board

TP.MS6486.PB756 is an FHD LED TV Driver Board with a screen resolution of 1920×1080.TP_MS6486_PB756 has also the features of Freeview, Saorview, and HEVC (H.265 codec). It has three HDMI ports, two USB ports for Multimedia and software update functions, a VGA port for PC input, and Wireless Connection. TP-MS6486-PB756 has the Special feature of Miracast functionality. TP MS6486 PB756 has dual-tuner input as DVB-T/T2 Tuner built in it.  TP.MS6486.PB756 is a combo board. TP.MS6486.PB756 firmware files are given below for free download.

Technical Specifications:

Board Model: TP.MS6486.PB756

Resolution: 1920×1080

Audio Power: 2x8W (8 ohm)

Backlight Current: 520 mA

Backlight Power: 75W

USB Ports: 2

HDMI Ports: 3

Scart: 1

RJ45: Yes

Analog Tuner: PAL, SECAM

Digital Tuner: DVB-T/T2/C/S/S2 (MPEG4 +HEVC)

Wifi: Yes

Mira-Cast: Yes

Satellite Input:

RAM: 512M

Memory: NAND Flash

Nand Flash: TH58NVG2S3HTА00

Power Rating: 220V~240V 50Hz

Power Consumption: 70Watt Max.

Firmware:

Firmware Type: USB Updateable Firmware & Nand Backup Dump

Product User: Hisense, Condor, VU

Note: The following given firmware is a backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dumping files then read here first.

How to Download firmware files:

Download all parts of the following software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

TP.MS6486.PB756 Firmware for free download: