Tag Archives: LCD Firmware

T.R83.A81 Universal LCD/LED TV Board

T.R83.A81 is a universal jumper board with multi-resolution panel screen-supported software. This is a non-combo board means no power supply module is built-in in the motherboard. So, a separate Input DC 12 Volt power supply will be required to get it operational. A fixed power supply module is required that can be AC to DC power Kit module or DC Adapter. This board supports all the essential connectivity interfaces for the user’s requirements.

Basic Info:

Model No. T.R83.A81

Main Chipset: RDA 8503C

Trademark: CXEL

Display Format: up to 1920×1200 (FHD)

Screen Panel Supported: up to 26″

Aspect Ratio: 4:3, 16:9 & 16:10

Board Size: 168.00 X 42.0 (mm)

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plugin the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Caution: 

All the pictures and specification details related to T.R83.A81 in this post is for reference only. If you are a user and do not have any experience of repairing then it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different as per the visual observations. So, please do not try it at home.

Pros:

There are many advantages to installing the given T.R83.A81 USB software or backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given software backup file
• Remote and Logo may change at your own choice to satisfy the customer
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given T.R83.A81 USB software or backup dump file. But it depends on the technician or user as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Remote Control may not work and the Logo may change by writing the given software
• Panel screen parameters may be changed

T.R83.A81 Version Upgrade:

Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only in case the default software malfunctions due to some bugs then the manufacturer provide the software update. Otherwise, no version update is issued.

T.R83.A81 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications and latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is USB bootable and a backup file that can be loaded by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download T.R83.A81 Firmware File:

Download all parts of the following T.R83.A81 firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

T.R83.A81 Firmware Files Free Download Here :

• T-R83-A81_1366x768_Firmware_USB
• T-R83-A81_1920x1080_Firmware_USB
• T-R83-A81_1366x768_RAPITRON RAP24V5_Backup
• T-R83-A81 1280×1024-19-INCH-DUMP

CV59H-C LED TV Board

CV59H-C is a simple ATV Drive Board designed for LCD/LED TVs. This Board is suitable for the Asia Pacific and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter module are required separately while the TV Tuner is placed into this PCB of the motherboard. This has all the features and connectivity interface as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Headphone jack. CV59H-C software files are given for the technician’s support.

General Specifications:

Brand/Mark: Universal FHD Board

Model: CV59H-C

Main Chip: TSUMV59XE-Z1

Product: LED TV

LED Backlight: NA

Backlight Current: mA

Flash IC: 4Mb

Screen supported: 43~65 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Menu+1147

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

CV59H-C firmware for free download:

TP.VST59.PA551 Universal TV Board

TP.VST59.PA551 is a non-smart universal LCD/LED TV Combo Controller Board.

Basic Info:

Model No. TP.VST59.PA551 (Combo Board)

Main Chipset: TSUMV59XU-Z1

LED Backlight: 220mA to 300mA

Display Format: 1080 FHD

Panel Supported: 19″ t0 26″

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC 220V

Maximum Current: 3000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (*. Bin file) to the U disk.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keypad and IR also

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu+1147

Note The following given firmware is USB bootable and dumps backup files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dumping files then read here first.

How to Download firmware files:

Download the following given firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

TP.VST59.PA551 Firmware Free Download:

• TP-VST59-PA551_1366x768_HISENSE_DUMP
• TP-VST59-PA551_1366x768_LLOYD_DUMP
• TP-VST59-PA551_1600x900_CONDOR_USB

For video tutorials, visit “Kazmi Elecom” my youtube channel.

TSUMV59-T8C1 LED TV Driver Board

TSUMV59-T8C1 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 24-inch to 42-Inches LED panels which a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. TUSMV59.T8C1 has multiple HDMI ports that support 1.4 and its HDCP support 1.1. TSUMV59_T8C1 is compatible with Non-HD and FHD LCD/LED panel screens. TSUMV59 T8C1 is widescreen-supported and also has a multi-language option. TSUMV59_T8C1 has its special feature of Dual AV extendable.TSUMV59-T8C1 software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: TSUMV59-T8C1

Main Chipset: TSUMV59

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following TSUMV59-T8C1 firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

TSUMV59-T8C1 Firmware Collection Free Download Here :

TSUMV59-T4C1 LED TV Board

TSUMV59-T4C1 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 24-inch to 42-Inches LED panels which a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. TUSMV59.T4C1 has multiple HDMI ports that support 1.4 and its HDCP support 1.1. TSUMV59_T4C1 is compatible with Non-HD and FHD LCD/LED panel screens. TSUMV59-T4C1 is widescreen-supported and also has a multi-language option. TSUMV59-T4C1 has its special feature of Dual AV extendable.TSUMV59-T4C1 software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: TSUMV59-T4C1

Main Chipset: TSUMV59

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

TSUMV59-T4C1 Firmware Collection Free Download Here :

MSDV3222-ZC01-01 LED TV Board

MSDV3222-ZC01-01 is a simple ATV Driver Motherboard designed for LCD/LED TVs. MSDV3222_ZC01_01 board is suitable for the Asia Pacific and the Middle East markets. It is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. MSDV3222 ZC01 01 has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.MSDV3222-ZC01-01 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: MSDV3222-ZC01-01

Main Chip:

Product: LED TV

LED Backlight:

Flash IC: 8Mb

Sound Chip:

Tuner IC:

Screen supported: 18.5-32 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

MSDV3222-ZC01-01 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Unfortunately, Launcher has Stopped. Smart Android LED TV Software Issue:

TSUMV59-T4C2 FHD LED TV Board

TSUMV59-T4C2 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 24-inch to 42-Inches LED panels which a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. TUSMV59.T4C2 has multiple HDMI ports that support 1.4 and its HDCP support 1.1. TSUMV59_T4C2 is compatible with Non-HD and FHD LCD/LED panel screens. TSUMV59-T4C2 is widescreen-supported and also has a multi-language option. TSUMV59-T4C2 has its special feature of Dual AV extendable.TSUMV59-T4C2 software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: TSUMV59-T4C2

Main Chipset: TSUMV59

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

TSUMV59-T4C2 Firmware Collection Free Download Here :

RSAG7.820.5870 4K LED TV Driver Board

RSAG7.820.5870 is a non-combo LED Ultra HD (4K) Certified Android TV Board. It has a 4K Ultra HD resolution of 3840×2160 and a Refresh Rate is 60 hertz. It has 4 HDMI ports to connect a set-top box, Blu-Ray players, a gaming console, and 3 USB ports to connect hard drives and other USB devices and play multimedia as well. It has Dolby DTS Support 20 Watts sound output and HDR Display viewing. RSAG7.820.5870/ROH can support the Smart TV Features such as Android, Google Play Store, Google Voice Search, Remote with Voice & Air Mouse also have Front Firing Speakers, etc. RSAG7.820.5870 ROH firmware files are given below for free of cost download.

General Features & Specifications:

Brand: China

Board Model: RSAG7.820.5870/ROH

Display Format: UHD

Screen Type: LED

Features Format: Smart

OS Version: VIDAA U3.0

Chipset: Mstar MSD

Processor: Quad-Core

Graphic Processor: Quad-core

RAM Capacity: GB DDR3

Storage Memory: GB ROM

Screen Resolution: 4K 3840×2160 (Ultra Hd)

No of HDMI Ports: 4

No of USB Ports: 3

Wi-Fi Type: Wi-Fi

Built-In Wi-Fi: Yes

Ethernet (RJ45): Yes

Speaker Output RMS: 16W

TV Tuner: Analog/Digital (DVT-T, T2, C, S, S2)

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: 100 W

Firmware Type: USB Update

Firmware Name: upgrade_loader.pkg

Product: HISENSE LTDN42k320UWSEU, HSSO 42320570EU

Note: The following firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download RSAG7.820.5870 Firmware File:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

Here is below RSAG7.820.5870 Firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

TSUM V59MS_T9B TV Board

TSUM V59MS_T9B is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Markets. It can support 32-inch to 50-Inches LED panels which a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. TUSMV59.T9B has multiple HDMI ports that support 1.4 and its HDCP support 1.1. TSUM V59MS_T9B is compatible with Non-HD and FHD LCD/LED panel screens. TSUM V59MS-T9B is widescreen-supported and also has a multi-language option. TSUM V59MS-T9B has its special feature of Dual AV extendable. TSUM V59MS-T9B software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: TSUM V59MS_T9B

Main Chipset: TSUMV59XUS

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

TSUM V59MS_T9B Firmware Collection Free Download Here :

RSAG7.820.8831 4K LED TV Board

RSAG7.820.8831 is a non-combo LED Ultra HD (4K) Certified Android TV Board. It has a 4K Ultra HD resolution of 3840×2160 and a Refresh Rate is 60 hertz. It has 3 HDMI ports to connect a set-top box, Blu-Ray players, a gaming console, and 2 USB ports to connect hard drives and other USB devices and play multimedia as well. It has Dolby DTS Support 20 Watts sound output and HDR Display viewing.

RSAG7.820.8831/ROH can support Smart TV Features such as Android, Google Play Store, Google Voice Search, Remote with Voice & Air Mouse also have Front Firing Speakers, etc. RSAG7.820.8831 ROH firmware files are given below for free of cost download.

General Features & Specifications:

Brand: China

Board Model: RSAG7.820.8831/ROH

Display Format: UHD

Screen Type: LED

Features Format: Smart

OS Version: VIDAA U3.0

Chipset: Mstar MSD6886

Processor: Quad-Core

Graphic Processor: Quad-core

RAM Capacity: GB DDR3

Storage Memory: GB ROM

Screen Resolution: 4K 3840×2160 (Ultra Hd)

No of HDMI Ports: 3

No of USB Ports:2

Wi-Fi Type: Wi-Fi

Built-In Wi-Fi: Yes

Ethernet (RJ45): Yes

Speaker Output RMS: 16W

TV Tuner: Analog/Digital (DVT-T, T2, C, S, S2)

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: 146 W

Firmware Type: USB Update

Firmware Name: upgrade_loader.pkg

Product: HISENSE H55B7100

Note: The following firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download RSAG7-820-8831 Firmware File:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

RSAG7.820.8831 Firmware for free download:

• RSAG7.820.8831_HISENSE H55B7100.part01
• RSAG7-820.8831_HISENSE H55B7100.part02
• RSAG7-820.8831_HISENSE H55B7100.part03