Mystery MTV-4028LT2 LED TV

Mystery MTV-4028LT2 is a 40 inches HD Ready LED TV with a resolution of 1366/768. MTV-4028LT2 is a non-smart tv. MTV-4028LT2 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. MTV-4028LT2 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. Mystery Software file is given below for the technician’s support. For more Mystery Software collection visit here.

General Specifications & Features:

Make: Mystery

Model: MTV-4028LT2

Display Size: “40

Storage Memory: MB

HD Technology: HD

Panel: HD V390HJ1-P02

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: MSDV3223-ZC01-01

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

Mystery MTV-4028LT2 Software file free download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Mystery MTV-3229LTA2 LED TV

Mystery MTV-3229LTA2 is a 32 inches HD Ready LED TV with a resolution of 1366/768. MTV-3229LTA2 is a non-smart tv. MTV-3229LTA2 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. MTV-3229LTA2 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. Mystery Software file is given below for the technician’s support. For more Mystery Software collection visit here.

General Specifications & Features:

Make: Mystery

Model: MTV-3229LTA2

Display Size: “32

Storage Memory: MB

HD Technology: HD

Panel: HD LK315T3HB94

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: MSDV3225-ZC01-01

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

Mystery MTV-3229LTA2 Software file free download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Mystery MTV-4030LT2 LED TV

Mystery MTV-4030LT2 is a 40 inches HD Ready LED TV with a resolution of 1366/768. MTV-4030LT2 is a non-smart tv. MTV-4030LT2 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. MTV-4030LT2 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. Mystery Software file is given below for the technician’s support. For more Mystery Software collection visit here.

General Specifications & Features:

Make: Mystery

Model: MTV-4030LT2

Display Size: “40

Storage Memory: MB

HD Technology: HD

Panel: HD V400HJ6-PE1

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: MSDV3222-ZC01-01

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

Mystery MTV-4030LT2 Software file free download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Mystery MTV-3226LT2 LED TV

Mystery MTV-3226LT2 is a 32 inches HD Ready LED TV with a resolution of 1366/768. MTV-3226LT2 is a non-smart tv. MTV-3226LT2 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. MTV-3226LT2 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. Mystery Software file is given below for the technician’s support. For more Mystery Software collection visit here.

General Specifications & Features:

Make: Mystery

Model: MTV-3226LT2

Display Size: “32

Storage Memory: MB

HD Technology: HD

Panel: HD V320BJ6

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: MS34631-ZC01-01

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

Mystery MTV-3226LT2 Software file free download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.VST29.03 Universal LCD/LED Controller Board

T.VST29.03 Firmware All Resolution Shared in this post.

Basic Info:

Model No. T.VST29.03

Main Chipset: TSUMV29, TSUMV39, TSUMV59

Trademark: Leroy

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

Board Size: 168.00 X 42.0 (mm)

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (*. Bin file) to the U disk.

Step 3: Connect the U disk with Mainboard

Step 4: Connect the Keypad and IR also

Step 5: Connect the power supply, check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu+1147

Note: The following given firmware is USB Boot. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware and then extract you will get the folder. Now load the file by the programmer. For More Detail about download, process watch the video Click Here

T.VST29.03 Firmware All resolutions Free Download Here :

TP.MS608.P82 Smart LED TV Board

TP.MS608.P82 is a smart Android LED TV motherboard with a special feature of 3D. The users can enjoy playing 3D movies of their own choice with this board. This is a combo three-in-one motherboard that has a built-in TV tuner. A 220-volt power supply and backlight driver circuit modules are also built into this motherboard with a single PCB. A single solution for all the items required for the panel screen. The maximum supported resolution of this board is 1920×1080 Full HD and it can support 32 to 55-inch screen panels.

TP.MS608.P82 has some smart applications built into its software that can be beneficial for the user. Multiple input connectivity interfaces for user convenience such as VGA input connection that is very helpful for the connectivity of a laptop or computer with a big screen, dual HDMI inputs that can support Full HD types of equipment for excellent results, dual USB input for playing multimedia files and software upgrade purpose. Dual RCA, Wifi, and RJ45 ethernet connection for wired internet are also given.

General Specifications:

Brand/Mark: China Universal Triple Network Drive Board

Main Board: TP.MS608.P82

OS: Android 4.4

CPU: Dual Core

Size: 18.5 * 21 cm

Back Light V/C : 70v-90v 450mA 45w

Ram: 512 Mb DDR

Rom: 4 Gb eMMC

Resolution: up to 1920×1080 (26″ to 55″)

Service Code:

Input/Source 1147

Caution: 

All the pictures and specification details related to TP.MS608.P82 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home. If the LED TV is slow then reset it to Factory Default only.

Pros:

There are many advantages to installing the given TP.MS608.P82 USB software or eMMC backup dump file. A few benefits are described below:

• The dead board or stuck-on logo can be recovered and operational by loading the given USB software or EMMC backup file
• Remote and Logo may change at your own choice to satisfy the customer
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board

Cons:

There may be some disadvantages to installing the given TP.MS608.P82 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Remote Control may not work and the Logo may change by writing the given software
• Panel screen parameters may be changed

TP.MS608.P82 Android Version Upgrade:

Please note that the installed version in this board is the final version and can not be upgraded to newest version. So, no need to upgrade the software if the board is working normally. Only if, the default software malfunctions due to some bugs will the manufacturer provide the software update. Otherwise, no version update is issued.

TP.MS608.P82 EMMC Backup:

This board has a 4GB eMMC chip. you can read the EMMC backup by Pendrive but for writing a backup of EMMC you should jtag the mainboard TP.MS608.P82 and write by a programming tool. Be careful while writing emmc backup file, if the board is on standby light due to wrong software or incomplete installation then you can do it, otherwise, it is on standby or red light due to hardware fault. So, first trace the fault. In this case, no need to write emmc backup.

TP.MS608.P82 Board Replacement:

If this 3D board is completely dead and has no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications, the newest Android version, and the latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable and EMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

How to Update:

1. Copy the upgrade file into USB Disk
2. Plug in the USB Disk into USB Interface Port of Main TV Card
3. Power on the TV
4. Wait for the LED light to start Flashing
5. If the LED light starts flashing, it means TV is entered in Upgrade Mode
6. Within in 2 minutes, the process will be done and LED light will flash speedily. It’s Done, Now Turn off the power and again turn on the TV.

TP.MS608.P82 firmware for free download:

CV338H-A50 Three-in-One Smart Board

CV338H-A50 is a Full HD Android smart universal LED TV Controller Board. This board is three in one which means the LED backlight Driver Circuit Module, ATV/DTV tuner, and the main power input circuit board are built into a single Printed Circuit Board (PCB). This motherboard came with the Android version 4.4. Its RAM is 512 MB memory and its storage capacity is 4 GB. It can support 42-inch to 75-inch sizes of screen panels. Its maximum resolution is Full HD 1920×1080 pixels.

CV338H-A50 has all the connectivity input interfaces as per current requirements for the user. The main processor is made by MSTAR that’s why its picture quality is very excellent. The sound quality is also good. It has dual RCA, Dual HDMI input ports, and dual USB connectivity interfaces. It has a built-in WiFi system with additional ethernet connectivity for wired internet. It has also a VGA connection for LAPTOP/PC connectivity.

General Specifications:

Brand/Mark: China Universal Triple Network Drive Board

Main Board: CV338H-A50

OS: Android 4.4

CPU: Dual Core

Size: 18.5 * 21 cm

Back Light V/C : 65v-110v 720mA 80w

Ram: 512 Mb DDR

Rom: 4 Gb eMMC

Resolution: up to 1920×1080 (42″ to 75″)

Service Code: 2580

How to Load Software:

1. Transfer the required resolution file into USB Disk
2. Plugin the USB Disk into Main Board
3. Keep Pressing the Standby/Power button and Power on the board
4. Wait until the led light starts flashing
5. Note: USB file must be the name of “CtvUpgrade.bin”

Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

CV338H-A50 firmware for free download:

P41-X9 V3.0 All-in-One Board

P45-X9 V3.0 is a three-in-one universal integrated LED TV motherboard. P45_X9 V3.0 Drive Plate can support up to 1920×1080 resolution and 26-32″ panel screens. It can support remote control to change program resolution. P45_X9_V3.0 supports boot music, and boot LOGO, can supports flip screen, and support national standard digital DMB-TH.

General Specifications:

Brand/Mark: TOP-TECH China Universal

Model: TOPTECH-P41-M6 3.0/P41-X9 V3.1

P41-X9 V3.0-A (P41-X9 V3.0-A P45-X9 V3.0 P40-X9)

Main Chipset: TSUMV59XU-Z1

Product: Three-In-One LED TV Motherboard

Backlight: 18-60 volt 240mA

Resolution: Upto 1920×1200

Panel: 15″ to 27″

Service Code: Menu+1147

Note: The following given firmware files are dump backups. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware and then extract you will get the folder. Now load the file by the programmer. For More Detail about the download, process watch the video Click Here

P41-X9 V3.0-A firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

TOP-TECH TSUX9V5 LED Universal Controller

• TOP-TECH TSUX9V5.0
• TOP-TECH TSUX9V5.1
• TOP-TECH TSUX9V5.1-A
• TOP-TECH TSUX9V5.1-C
• TOP-TECH TSUX9V5.1-D
• TOP-TECH TSUX9V5.3
• VD-TSU59V5.1D-XC

Basic Info:

Model No. TSUX9V5.x

Main Chipset: TSUMV59XU-Z1 & TSUMV29LU

Trademark: TOP-TECH

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program to the U disk base on your screen size.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu+2580

Note: Following firmware collection is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

TSUX9V5 Firmware All resolutions Free Download Here :

VD-TSU59V5.1D-XC

For video tutorials, visit “Kazmi Elecom” my youtube channel.

TP.MS338.PB801 Smart Board

TP.MS338.PB801 is a universal smart integrated board with an Android wifi network function. TP MS338 PB801 is a three-in-one network Driver Wi-Fi board that can support up to 32 to 48-inch screens. TP_MS338_PB801 can be equipped with various screens. TP.MS338 PB801 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to VGA, Scart, and Earphones. TP.MS338-PB801 has a LAN/RJ45 Connector interface port also for the wired internet network.

TP_MS338_PB801 is a Combo Network Triple play board that has a Digital TV tuner built-in in it. The Graphics and Sound quality of the TP.MS338-PB801 android board are very good and the Response rate is very efficient.  TP.MS338.PB801 firmware is available for technician support.

General Specifications:

Brand/Mark: FHD Smart DVB-T2 LED TV Main Board

Main Borad Model: TP.MS338.PB801

Main Chipset: DTMB: MSD6A338ST-WL OR MSD6A338ST-003J
DVB-T2: MSD6A338SXE-WLOR MSD6A338SXE-003J

OS: Android 4.4

CPU: A7*2

CPU Frequency: 1GHz

GPU: Mali400*2

GPU Frequency: 550MHz

Ram: 512 Mb & 1 Gb

Rom: 4/8 Gb eMMC

Backlight: 30v to 160v 45w

Audio Output: 2x8w

Resolution: upto 1920×1080 (32” to 46″)

Service Code: Menu+1147

Note: The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

How to Install:

• Copy the .bin file into the USB disk
• Connect the U-Disk to TV
• Switch on the TV
• Standby lights start flashing. when the light flashing speed increases it means it is complete.
• Switch OFF, Remove the Disk, and Switch ON again. Done

 TP.MS338.PB801 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

allupgrade_msd338_4G_ref29.bin
allupgrade_msd338_4G_ref34.bin

allupgrade_msd338_4G_ref54.bin

allupgrade_msd338_4G_ref68.bin