CLASS HD 9000 X PLUS dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of CLASS HD 9000 X PLUS receiver. The main processor/Microcontroller retrieves the information from memory ic when it is power on to know how to work/boot. If the Flash IC/Memory IC of the CLASS HD 9000-X-PLUS receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver CLASS HD9000-X-PLUS does not turn on.
In this situation, we need to reprogram the flash ic of the CLASS HD9000-X-PLUS receiver with the matched hardware dump/flash file to get the receiver in normal condition. A dump file of CLASS HD 9000 X PLUS is shared for technician/user support.
Information and Specifications of CLASS HD 9000-X-PLUS:
Manufacturer: CLASS HD
Box Model: 9000 X PLUS
Main Board:
Main Controller or Chipset:
Box Type: Digital Full HD
Flash Type: SPI SOP8/SOIC8
Flash Memory: GD25Q32B
Flash Size: 4 MB
Software Type: Backup Dump
Software Size: 2.73 MB
Download File Format: ZIP
Download Type: Free
Note:
Given CLASS HD 9000 X PLUS receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss because of uploading/downloading the software.
AZFOX S2S dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of AZFOX-S2S receiver. The main processor/Microcontroller retrieves the information from memory ic when it is powered on to know how to work/boot.
If the Flash IC/Memory IC of the AZFOX_S2S receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver AZFOX-S2S does not turn on. In this situation, we need to reprogram the flash ic of the AZFOX_S2S receiver with the matched hardware dump/flash file to get the receiver in normal condition. A dump file of AZFOX S2S is shared for technician/user support. For more receiver dump files collection visit here.
Information and Specifications of AZFOX S2S:
Manufacturer: AZFOX
Box Model: S2S
Main Board:
Main Controller or Chipset:
Box Type: Digital Full HD
Flash Type: SPI SOP8/SOIC8
Flash Memory: GD25Q32B
Flash Size: 4 MB
Software Type: Backup Dump
Software Size: 3.15 MB
Download File Format: ZIP
Download Type: Free
Note:
Given AZFOX S2S receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss because of uploading/downloading the software.
Here is the download link of the AZFOX S2Sdump file free download.
The programmer is a hardware device that is designed for transferring or writing the program/software to a flash ic or chip. This is also called a ROM burner. Every electronic circuit including a rom ic or EEPROM simply called memory is to stores the instruction about its operation written by a developer. this information or program can only be transferred into memory ic by the help of a programming tool or burning device. so, there are too many programming devices available in the market for flashing bios on computers/laptops and for writing software in all electronic appliances like DVD, LCD, LED TV, etc.
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out
Audio O/P Power: 2 x 3 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for motherboard only)
Maximum Current for USB: 500mA
How to Upgrade Firmware:
Step 1: Empty/format the USB disk
Step 2: Copy the required resolution program (*. Bin file) to the USB disk.
Step 3: Connect the USB disk with the Mainboard in the USB Port
Step 4: Connect the Keypad and IR
Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,
Factory Service Mode:
Menu+1147
Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download your required resolution firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here
T.R85.03 Firmware All resolutions Free Download Here :
P65-M6 V6.0 three-in-one combo universal motherboard (backlight + power + TV motherboard) replaces the P60 PMA and other 900MA 65-95V backlight. The backlight power is 45W. Support 32-42 inch LCD with maximum support 1920X1080 resolution. Support high score and low score LCD display also, use U disk to update data. Backlight current can be changed by writing data, no manual jumper is needed. A complete set of LCD data is provided. Allows you to invert the screen and select from the bus menu. P65-M6 V6.0 software files are given below for the technician’s support.
General Description:
Brand/Mark: China Universal
Model: P65-M6 V6.0
Main Chipset: TSUMV56RUU-Z1
Product: LED TV
Supported Screen: 32-inch- 46 inch
Resolution: Up to 1920×1080
Backlight Volt: 65-95V
Backlight Current: 900mA
Backlight Power: 45w
Panel: CMO, Universal
Flash Size: 4 Mb
Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
Transfer the required resolution file into USB Disk
Plugin the USB Disk into Main Board
Keep Pressing the Standby/Power button and Power on the board
Wait until the led light starts flashing
Note: USB file must be the name of “MstarUpgrade.bin”
Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out
Audio O/P Power: 2 x 3 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for motherboard only)
Maximum Current for USB: 500mA
How to Upgrade Firmware:
Copy the Required Firmware/software in FAT32 USB Disk
Plug in the U disk into the Mainboard USB port of LCD/LED TV
Switch ON the power and Wait even IR indicator led stops flashing
Done. Unplug the Udisk (It will take max 1 min to upgrade firmware)
Factory Service Mode:
Menu+1147
Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here
ITV.V59.031.13 Firmware All resolutions Free Download Here :
The analog High Definition V59 Dual AV universal LCD/LED TV driver motherboard known as T.VST59.A10 is intended for markets in Asia and the Middle East. T_VST59_A10 has generally required interface ports like AV, PC VGA, HDMI, Earphone, RF, and USB interface. The panel monitors with a resolution of 1920 x 1080 can be used with the T-VST59-A10. The picture and sound quality are excellent.
This board is mostly found in SHARP LCD TVs, but it can also be found in other brands. Its USB point of interaction can be utilized for programming overhauls and sight and sound playback. T VST59 A10 has a 30-pin LVDS connector. Panel sizes ranging from 24 to 55 inches are supported. In the event that you are confronting any issue during firmware establishment, visit and read here first.T.VST59.A10 software files are shared in this post.
General Specifications:
Model Name: T.VST59.A10 (High Definition V59 Dual AV LCD Driver Board)
Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download Firmware File:
Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here
Here are below some T.VST59.A10 Firmware for free Download:
RSAG7.820.5236 is a non-combo HD & FHD LED TV Board. It is supported by an FHD resolution of 1920×1080 and a Refresh Rate is 50/60 hertz with a smooth motion rate of 200 SMR. It has multiple HDMI ports to connect a set-top box, Blu-Ray players, and gaming console, and also have more than one USB port to connect hard drives and other USB devices and play multimedia as well. It has a Dolby Sound system that Supports 16 Watts sound output and HDR Display viewing. RSAG7.820.5236 firmware files are given below for free of cost download to support technicians.
General Features & Specifications:
Brand: China
Board Model: RSAG7.820.5236/ROH
Display Format: FHD 1080P
Screen Type: LED
Features Format: Non-Smart
OS Version: NA
Chipset: TSUMV59XUS
Processor: V59
Graphic Processor:
RAM Capacity: GB DDR3
Storage Memory: 4 Mb SPI Flash
Screen Resolution: 1920×1080
No of HDMI Ports: 3
No of USB Ports: 2
Wi-Fi Type: No
Built-In Wi-Fi: No
Ethernet (RJ45): No
Speaker Output: 16W
Tuner: ATV/DTV (DVB-C, DVB-T2, DVB-T)
Power Requirement: AC 110 – 240 V, 50/60 Hz
Power Consumption: 80 W
Firmware Type: Backup dump
Firmware Name: NA
Product: VU, HISENSE, ABAJ, DEVANT, etc.
Note: The following firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download RSAG7.820.5236 Firmware File:
Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
T.RD8501.03 is a universal LCD LED TV controller board. This board is multi-panel supported and multi-resolution supported with a maximum resolution of Full HD 1920×1080 pixels. It can be installed with 15-55-inch screen panels. It has multiple input interface ports such as USB, HDMI, VGA, RCA, and RF Tuner. It can be operated by a 12V DC power supply directly. It has a jumper setting for Panel screen power with different settings of 3.3V, 5V, and 12V.
Basic Info:
Model No. T.RD8501.03
Main Chipset: RD8501C
Display Format: up to 1920×1080
Aspect Ratio: 4:3, 16:9 & 16:10
Board Size: 168.00 X 42.0 (mm)
General Specifications:
TV System: PAL/SECAM/NTSC
Panel Interface: Single channel or Dual channel LVDS
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out
Audio O/P Power: 2 x 3 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for motherboard only)
Maximum Current for USB: 500mA
How to Upgrade Firmware:
Step 1: Empty/format the USB disk
Step 2: Copy the required resolution program (*. Bin file) to the USB disk.
Step 3: Connect the USB disk with the Mainboard in the USB Port
Step 4: Connect the Keypad and IR
Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,
Factory Service Mode:
Menu+1147
Note: The following T.RD8501.03 firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before
How to Download:
Download the following given required resolution firmware and then extract it you will get the folder. Now copy the bin file to Pen drive and install it by USB. For More Details about the download, process watch the video Click Here
T.RD8501.03 Firmware All resolutions Free Download Here :
