Tag Archives: kazmi elecom

TP.MS608.P83 Smart LED TV Board

TP.MS608.P83 is designed for a Network function Analog TV Board which is suitable for Asian Markets and the Middle East as well. It supports the screen size of 26″ to 47″. This is a three-in-one motherboard integration of the main power module LED Backlight Driver/Inverter module and TV Module in a single piece of a motherboard.

It is best with its interfaces like Dual AV/Component, Dual HDMI input, Dual USB interface slot that can be used for Software upgrade and multimedia playback, PC Input with audio and Headphone jack, and Rj45 network interface that supports 10/100M auto-identification and DHCP. TP.MS608.P83 supports ATV and DTV with the standard DT supports.

General Specifications:

Brand/Mark: China Universal Smart WIFI Network Drive Board

Main Board: TP.MS608.P83

Main Chipset: MSD6A608HTAB

Panel Volt: 5v/12v

Audio Output Power: 2x8w(8Ohm)

OS: Android 4.4

CPU: Dual Core

Size: 18.5 * 21 cm

Back Light V/C : 90v-100v 520mA 45w

Ram: 512 Mb DDR

Rom: 4 Gb eMMC

Resolution: upto 1920×1080

Screen Size Supported: 26″ to 47″

Power AC Input: 100~240V/75W

Service Code: 1147

Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

How to Update:

1. Download all parts and then extract any one of them and copy the upgrade file into USB Disk
2. Plug the USB Disk into the USB Interface Port of the Main TV Card
3. Press the Volume+ button When powering on the TV
4. Wait for the LED light to flash
5. If the LED light starts flashing, it means the TV is entered in Upgrade Mode and Upgrade screen will appear
6. Within in 2 minutes, the process will be done and the tv will go to standby mode.

TP.MS608.P83 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

TP.VST59S.PC815 HD LED TV Board

TP.VST59S.PC815 is designed for an LCD/LED HD TV Board that supports the screen size of 42″ to 65″. This is three in one motherboard that has the main power module and an Inverter module in a single piece of a motherboard. It is best with its interfaces like Dual AV, Dual HDMI input, Dual USB interface, PC Input with audio, and Headphone jack. It has 40 pins LVDS Connector screen cable and has 4MB of program storage memory.

General Specifications:

Brand/Mark: Leory China Universal HD Three in One Board

Model: TP.VST59S.PC815

Product: LED TV

LED Backlight Current: 480MA, 720MA, 900 MA

100 HZ Supported: Yes

Flash IC: 4Mb

Screen supported: 42-65 inch

Resolution: Upto 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Menu+1147

How to Program:

1. Format the USB Disk with FAT32 System
2. Transfer the required resolution file into USB
3. Insert the USB into TV Motherboard USB interface
4. Connect the Keyboard&IR
5. Power on the Main Board and wait until LED light Start Flashing
6. Keep watching while the LED light stops flashing. Its Done

Note: The following firmware is a USB Boot/dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware Files:

Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

Here are below some TP.VST59S.PC815 firmware for free download:

MSD338STV5.0

MSD338STV5.0 is a Smart Wireless Network TV Driver Board specially designed as Universal LCD LED Controller Board For Android WI-FI ATV functions. This is suitable for all HD LCD/LED panels. This Intelligent Network TV board has a special feature of Android and ROM storage capacity. MSD338STV5.0 Supports RJ45 network signal, USB 2.0, HDMI 1.4, and TV（ ATV and DTV).VGA, AV input, and earphone output. MSD338STV5.0 Built full-featured browser and support for HTML5 web page format, providing the fun of browsing the web and watching a video at random. It also supports surfing the internet with a wireless mouse and keyboard.

General Specifications:

Brand/Mark: LCD/LED Main Board (Android WIFI Network Drive Board)

Main Borad : MSD338STV5.0

OSD Language: Chinese, English, Espoal, French, Vietnemese

TV Signal: ATV and DVMB

Input Interface: PC / VGA / HDMI / TV / Network / USB / TF / Dual AV

Panel Voltage: 5V/12V

Screen Supported: 17-65 inch

Resolution Supported: 1920×1080

OS: Android 4.4

CPU: 1.5GHz (ARM Cortex A7 double Core CPU)

GPU: Multi-core Mali -400MP2

Ram: 512Mb/1Gb

Rom: 4 Gb eMMC

Flip/Mirror Mode: Yes

Display/Boot Logo: Yes

Parent Lock: Yes

Power Rating: 12V/4Amp DC

Service Code:

Source+2580

How to Load Software:

1. Transfer the required resolution file into USB Disk
2. Plugin the USB Disk into Main Board
3. Keep Pressing the Standby/Power button and Power on the board
4. Wait until the led light starts flashing
5. Note: Do Not Cut the power during Flash burning process

Note: Following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download firmware file:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

Here are below some MSD338ST V5.0 firmware for free download:

Firmware Name:

GZGT_MSD338-V5.0_PAL_DVBT_1G_4G_AU20_T200XW02_1366x768_AT070_20161105_134948
GZGT_MSD338-V5.0_PAL_ATV_1G_4G_M190A1_6BIT_AT070_20161216_1440-900_no
GZGT_MSD338-V5.0_PAL_DVBT_1G_4G_Panel_M190A1_1440x900_AT070_20161105_193507
GZGT_YuShi_MSD338-V5.0_PAL_DVBT_1G_4G_Panel_1440x900_Freerun_LT_20170712_165824
GZGT_MSD338-V5.0_PAL_DVBT_1G_4G_Panel_1600x900_GZGT_AT070_20161105_141845
GZGT_MSD338-V5.0_DTMB_1G_4G_Panel_1680x1050_Sagittarius2_AT070_20170512_100253_NO
GZGT_MSD338-V5.0_PAL_DVBT_1G_4G_Panel_1680x1050_AT070_20161105_150742
GZGT_MSD338-V5.0_PAL_DVBT_1G_4G_FullHD_CMO216_H1L01_1920x1080_AT070_20161108_195645_no
GZGT_MSD338-V5.0_PAL_ATV_512M_4G_FullHD_CMO216_H1L01_SWAP0_AT070_20161214_1920-1080_NO

General Screen Specifications:

• 1366X768 DUAL DO8bit
• 1366X768_swap0_6bit
• AU2O_T200XWO2_DUAL_8b it
• AU2O_T200XWO2_swap0_6b it
• AU2O_T200XWO2_swap0_8bit
• FulIHD_CMO216_H1L01
• HSD280MUW3_1920X1200
• LTM170W1-L01_1280x768_swap0_8bit
• LTM200_1600X900
• LTM240CT04_1920X1200
• M150XN07_1024X768
• M170 1280X1024
• M190A1 1440X900
• M190A1
• M220_1680x1050
• M236 1920X1080
• N14113-L05 1280X800
• Panel_1680x1050
• SXGA_AU17_E NO5
• TTM200KT03_1600X900
• V236 1366X768_swap0_8bit

For video tutorials, visit “Kazmi Elecom” my youtube channel.

TP.MS338.PC822 Smart Board

TP.MS338.PC822 is an Android network driver board with an FHD resolution of 1920×1080. TP.MS338_PC822 has a powerful wifi system. Smart FHD TV With Android Platform and great features to entertain Full HD Wide Screen with better-to-work SMART. TP.MS338 PC822 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to VGA, Card reader slot, and Earphones. TP.MS338-PC822 has a LAN/RJ45 Connector interface port also for the wired internet network.

TP_MS338_PC822 is a Combo Network Triple play board that has a Digital TV tuner built-in in it. The Graphics and Sound quality of the TP.MS338-PC822 android board is very good and the Response rate is very efficient. TP.MS338-PC822 China smart network board can support up to 55″ screen panels. TP.MS338.PC822 firmware is available for technician support.

General Specifications:

Brand/Mark: China Universal Network Smart Triple Play Board

Main Borad : TP-MS338-PC822

OS: Android 4.4

CPU: A7*2

GPU: Mali400*2

Ram: 512 Mb

Rom: 4 Gb eMMC

Resolution: up to 1920×1080

Service Code: Menu+1147

Note: The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

How to Install:

• Copy the .bin file into the USB disk
• Connect the U-Disk to TV
• Switch on the TV
• Standby lights start flashing. when the light flashing speed increases it means it is complete.
• Switch OFF, Remove the Disk, and Switch ON again. Done

TP.MS338.PC822 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

CV512H-D42 LED TV Board

CV512H-D42 is a simple ATV & DTV Driver Motherboard designed for LCD/LED TVs. CV512H.D42 board is suitable for the European markets.CV512H_D42 is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. CV512H D42 has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.CV512H-D42 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CV512H-D42

Main Chip:

Product: LED TV

LED Backlight: V

Backlight Current: mA

Flash IC: 8Mb

Screen supported: 32-43 inch

Resolution: Up to 1920×1080

AUDIO: RDA3118E28

Tuner Type: ATV and DTV (DVB-T MPEG4, DVB-C, DVB-T2, DVB-S2)

Tuner: CDT-9NT372-RD60 & CDT-9NS161-RD41

Panel Voltage: 5V, 12V

Power Input: 220V AC

Memory: 8Mb SPI Flash

Service Code:

Source/Input+2580

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

CV512H-D42 firmware for free download:

• CV512H_D42_ARTEL_1366x768_DUMP

ECHOLINK 2020 4K Satellite Receiver

ECHOLINK 2020 4K dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of ECHOLINK 2020 4K receiver. The main processor/Microcontroller retrieves the information from memory ic when it is power on to know how to work/boot. If the Flash IC/Memory IC of the ECHOLINK 2020 4K receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver ECHOLINK 2020 4K does not turn on. In this situation, we need to reprogram the flash ic of the ECHOLINK 2020 4K receiver with the matched hardware dump/flash file to get the receiver in normal condition. A dump file of ECHOLINK 2020 4K is shared for technician/user support.

Information and Specifications of ECHOLINK 2020 4K:

Manufacturer: ECHOLINK

Box Model: 2020 4K

Main Board: MM1-AVL1506T-WJX_V1.2

Main Controller or Chipset: 1506T

Box Type: Digital Full HD

Flash Type: SPI SOP8/SOIC8

Flash Memory: GD25Q32B

Flash Size: 4 MB

Software Type: Backup Dump

Software Size: 3.54 MB

Download File Format: ZIP

Download Type: Free

Note:

Given ECHOLINK 2020 4K receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss because of uploading/downloading the software.

Here is the download link of the ECHOLINK 2020 4K dump file free download.

ECHOLINK 2017 HYBRID Satellite Receiver

ECHOLINK 2017 HYBRID dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of ECHOLINK 2017 HYBRID receiver. The main processor/Microcontroller retrieves the information from memory ic when it is power on to know how to work/boot. If the Flash IC/Memory IC of the ECHOLINK 2017 HYBRID receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver ECHOLINK 2017 HYBRID does not turn on. In this situation, we need to reprogram the flash ic of the ECHOLINK 2017 HYBRID receiver with the matched hardware dump/flash file to get the receiver in normal condition. A dump file of ECHOLINK 2017 HYBRID is shared for technician/user support.

Information and Specifications of ECHOLINK 2017 HYBRID:

Manufacturer: ECHOLINK

Box Model: 2017 HYBRID

Main Board:

Main Controller or Chipset:

Box Type: Digital Full HD

Flash Type: SPI SOP8/SOIC8

Flash Memory: EN25Q32

Flash Size: 4 MB

Software Type: Backup Dump

Software Size: 2.72 MB

Download File Format: ZIP

Download Type: Free

Note:

Given ECHOLINK 2017 HYBRID receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss because of uploading/downloading the software.

Here is the download link of the ECHOLINK 2017 HYBRID dump file free download.

ECHOLINK 750S JADOO Satellite Receiver

ECHOLINK 750S JADOO dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of ECHOLINK 750S JADOO receiver. The main processor/Microcontroller retrieves the information from memory ic when it is power on to know how to work/boot. If the Flash IC/Memory IC of the ECHOLINK 750S JADOO receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver ECHOLINK 750S JADOO does not turn on. In this situation, we need to reprogram the flash ic of the ECHOLINK 750S JADOO receiver with the matched hardware dump/flash file to get the receiver in normal condition. A dump file of ECHOLINK 750S JADOO is shared for technician/user support.

Information and Specifications of ECHOLINK 750S JADOO:

Manufacturer: ECHOLINK

Box Model: 750S JADOO

Main Board:

Main Controller or Chipset:

Box Type: Digital Full HD

Flash Type: SPI SOP8/SOIC8

Flash Memory: GD25Q32B

Flash Size: 4 MB

Software Type: Backup Dump

Software Size: 3.56 MB

Download File Format: ZIP

Download Type: Free

Note:

Given ECHOLINK 750S JADOO receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. KazmiElecom Team is not responsible for any type of damage/loss because of uploading/downloading the software.

Here is the download link of the ECHOLINK 750S JADOO dump file free download.

CLASS HD CL2012 X HD PLUS Satellite Receiver

CLASS HD CL2012 X HD PLUS dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of CLASS-HD CL2012 X HD PLUS receiver. The main processor/Microcontroller retrieves the information from memory ic when it is powered on to know how to work/boot.

If the Flash IC/Memory IC of the CLASS-HD CL2012 X HD PLUS receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver CLASS HD CL2012 X HD PLUS does not turn on. In this situation, we need to reprogram the flash ic of the CLASS-HD CL2012 X HD PLUS receiver with the matched hardware dump/flash file to get the receiver in normal condition. A dump file of CLASS HD CL2012 X HD PLUS is shared for technician/user support.

Information and Specifications of CLASS HD CL2012 X HD PLUS:

Manufacturer: CLASS HD

Box Model: CL2012 X HD PLUS

Main Board: HSP06C0S5-A

Main Controller or Chipset:

Box Type: Digital Full HD

Flash Type: SPI SOP8/SOIC8

Flash Memory: GD25Q32B

Flash Size: 4 MB

Software Type: Backup Dump

Software Size: 3.5 MB

Download File Format: ZIP

Download Type: Free

For more Flash Dump Files Visit Here.

Note:

Given CLASS HD CL2012 X HD PLUS receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss because of uploading/downloading the software.

CLASS HD CL2012 X HD PLUS dump file free download.

CLASS HD 9000 X PLUS Satellite Receiver

CLASS HD 9000 X PLUS dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of CLASS HD 9000 X PLUS receiver. The main processor/Microcontroller retrieves the information from memory ic when it is power on to know how to work/boot. If the Flash IC/Memory IC of the CLASS HD 9000-X-PLUS receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver CLASS HD9000-X-PLUS does not turn on.

In this situation, we need to reprogram the flash ic of the CLASS HD9000-X-PLUS receiver with the matched hardware dump/flash file to get the receiver in normal condition. A dump file of CLASS HD 9000 X PLUS is shared for technician/user support.

Information and Specifications of CLASS HD 9000-X-PLUS:

Manufacturer: CLASS HD

Box Model: 9000 X PLUS

Main Board:

Main Controller or Chipset:

Box Type: Digital Full HD

Flash Type: SPI SOP8/SOIC8

Flash Memory: GD25Q32B

Flash Size: 4 MB

Software Type: Backup Dump

Software Size: 2.73 MB

Download File Format: ZIP

Download Type: Free

Note:

Given CLASS HD 9000 X PLUS receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss because of uploading/downloading the software.

CLASS HD 9000 X PLUS dump file free download.