Tag Archives: kazmi elecom

B.MTD21B LED TV Board

B.MTD21B is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separatley but ATV Card is builtin into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. B.MTD21B firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: B.MTD21B

Main Chip:

Product: LCD/LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Name:

Firmware Type:

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dumpfiles, or facing any issues during firmware installation then visit and read here first.

B.MTD21B firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

SUPRA STV-LC32LT0060F LED TV

SUPRA STV-LC32LT0060F is a 32 inches HD Ready LED TV with a resolution of 1366×768. STV-LC32LT0060F is a non-smart tv. STV-LC32LT0060F led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. STV-LC32LT0060F has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. SUPRA Software file is given below for the technician’s support. For more SUPRA Software collection visit here.

General Specifications & Features:

Make: SUPRA

Model: STV-LC32LT0060F

Display Size: “32

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

SUPRA STV-LC32LT0060F Software file free download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

SUPRA STV-LC40T420FL LED TV

SUPRA STV-LC40T420FL is a 40 inches HD Ready LED TV with a resolution of 1366×768. STV-LC40T420FL is a non-smart tv. STV-LC40T420FL led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. STV-LC40T420FL has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. SUPRA Software file is given below for the technician’s support. For more SUPRA Software collection visit here.

General Specifications & Features:

Make: SUPRA

Model: STV-LC40T420FL

Display Size: “40

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

SUPRA STV-LC40T420FL Software file free download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.MS6M48.1C Universal Board

T.MS6M48.1C is a universal jumper board with multi-resolution panel screen supported software.

Basic Info:

Model No. T.MS6M48.1C

Main Chipset:

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Tuner:

Sound:

Bin Name:

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Copy the Required Firmware/software into FAT32 USB Disk
Plugin the U disk into the Mainboard USB port of the LCD/LED TV
Switch ON the power and Wait until even the IR indicator led stops flashing
Done. Unplug the U-disk (It will take a max half min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dumpfiles, or facing any issues during firmware installation then visit and read here first.

T.MS6M48.1C Firmware All resolutions Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

HK.T.RT2861P839 4K Smart Board

HK.T.RT2861P839 is a DVB-T2 4K Digital Internet TV 3-in-1 LCD/LED TV motherboard. It is suitable for the LVDS interface and supports more than 65 inches of LED panels, with a maximum resolution of up to 3840×2160. HK_T_RT2861P839 is a three-in-one (combo) board i.e. power card, backlight driver module, and ATV board built into it. HK-T-RT2861P839 has all connectivity interfaces as per the latest user requirements such as multi HDMI input ports, RCA input, USB2.0 & USB3.0 inputs, VGA interface for computer connectivity, and RF tuner.

HK T RT2861P839 is a universal board but is also installed in different LED TV brands. Some of them are Echolink, Clever TV, and Magic LED TV, etc. Realtek processor is used in this motherboard that’s why its graphic quality is very excellent. Its USB interface can be used for loading software as well as for playing multimedia files. HK-T-RT2861P839 can receive Digital TV (DTV) signal broadcasting and analog TV signals as well. HK.T.RT2861P839 software is shared below for the support of technicians.

General Specifications:

Model: HK.T.RT2861P839

Main Chipset: RTK2861

Resolution Supported: 3840×2160

OS: Android 7.1.1

RAM: 1.5G

ROM: 4G/8G

CPU: A53*4

GPU: IMG7800

Audio Output Power: 2X10 W (8Ω)

Tuner: DVB-T/T2

Service Code: 2580

Firmware File: Install.img

Firmware Type: USB Upgradeable

Caution: 

All the pictures and specification details related to HK.T.RT2861P839 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home. If the LED TV is slow then reset it to Factory Default only.

Pros:

There are many advantages to installing the given HK.T.RT2861P839 USB software or eMMC backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given USB software or EMMC backup file
• Remote and Logo may change at your own choice to satisfy the customer
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given HK.T.RT2861P839 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Remote Control may not work and the Logo may change by writing the given software
• Panel screen parameters may be changed

HK.T.RT2861P839 Android Version Upgrade:

Please note that the installed version in this board is the final version and the Android version is not updateable. So, no need to upgrade the software if the board is working normally. Only if, the default software malfunctions due to some bugs will the manufacturer provide the software update. Otherwise, no version update is issued.

HK.T.RT2861P839 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications, the newest Android version, and the latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable and EMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

HK.T.RT2861P839 Firmware files for Free Download:

Firmware Name:

200_YiMao_2861P839_1.5G_4G__ST5461D07-1_Iraq_190110_112456_svn18450

218_2861P839_1.5G_4G_YiMao_YM2018405_Iraq_190508_165005_svn21112

SUPRA STV-LC16740WL LED TV

SUPRA STV-LC16740WL is a 16 inches HD Ready LED TV with a resolution of 1366×768. STV-LC16740WL is a non-smart tv. STV-LC16740WL led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. STV-LC16740WL has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. SUPRA Software file is given below for the technician’s support. For more SUPRA Software collection visit here.

General Specifications & Features:

Make: SUPRA

Model: STV-LC16740WL

Display Size: “16

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

SUPRA STV-LC16740WL Software file free download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

SUPRA STV-LC32820WL LED TV

SUPRA STV-LC32820WL is a 32 inches HD Ready LED TV with a resolution of 1366×768. STV-LC32820WL is a non-smart tv. STV-LC32820WL led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. STV-LC32820WL has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. SUPRA Software file is given below for the technician’s support. For more SUPRA Software collection visit here.

General Specifications & Features:

Make: SUPRA

Model: STV-LC32820WL

Display Size: “32

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

SUPRA STV-LC32820WL Software file free download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

HI3520DV400_4CH_2L_DVR_V1_2 DVR

HI3520DV400_4CH_2L_DVR_V1_2 DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

HI3520DV400_4CH_2L_DVR_V1_2 DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of HI3520DV400_4CH_2L_DVR_V1_2 DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

HI3520DV400_4CH_2L_DVR_V1_2 DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

5800-A5M92A-0P20 LED TV Board

5800-A5M92A-0P20 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separatley but ATV Card is builtin into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. 5800-A5M92A-0P20 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: 5800-A5M92A-0P20

Main Chip:

Product: LCD/LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Name:

Firmware Type:

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dumpfiles, or facing any issues during firmware installation then visit and read here first.

5800-A5M92A-0P20 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

JUG7.820.855 LED TV Board

JUG7.820.855 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separatley but ATV Card is builtin into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. JUG7.820.855 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: JUG7.820.855

Main Chip:

Product: LCD/LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Name:

Firmware Type:

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dumpfiles, or facing any issues during firmware installation then visit and read here first.

JUG7.820.855 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.