Tag Archives: kazmi elecom

SUPRA STV-LC32T420WL LED TV

SUPRA STV-LC32T420WL is a 32 inches HD Ready LED TV with a resolution of 1366×768. STV-LC32T420WL is a non-smart tv. STV-LC32T420WL led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. STV-LC32T420WL has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. SUPRA Software file is given below for the technician’s support. For more SUPRA Software collection visit here.

General Specifications & Features:

Make: SUPRA

Model: STV-LC32T420WL

Display Size: “32

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

SUPRA STV-LC32T420WL Software file free download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

SUPRA STV-LC3214WD LED TV

SUPRA STV-LC3214WD is a 32 inches HD Ready LED TV with a resolution of 1366×768. STV-LC3214WD is a non-smart tv. STV-LC3214WD led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. STV-LC3214WD has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. SUPRA Software file is given below for the technician’s support. For more SUPRA Software collection visit here.

General Specifications & Features:

Make: SUPRA

Model: STV-LC3214WD

Display Size: “32

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

SUPRA STV-LC3214WD Software file free download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

HD.MVX9-A9.VER_1.0 Universal Board

HD.MVX9-A9.VER_1.0 is a universal jumper board with multi-resolution panel screen supported software.

Basic Info:

Model No. HD.MVX9-A9.VER_1.0

Main Chipset:

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Tuner:

Sound:

Bin Name:

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Copy the Required Firmware/software into FAT32 USB Disk
Plugin the U disk into the Mainboard USB port of the LCD/LED TV
Switch ON the power and Wait until even the IR indicator led stops flashing
Done. Unplug the U-disk (It will take a max half min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dumpfiles, or facing any issues during firmware installation then visit and read here first.

HD.MVX9-A9.VER_1.0 Firmware All resolutions Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

P150-3683V6.0 LED TV Board

P150-3683V6.0 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets.This is a three in one Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. P150-3683V6.0 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: P150-3683V6.0

Main Chip:

Product: LCD/LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name:

Firmware Type:

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dumpfiles, or facing any issues during firmware installation then visit and read here first.

P150-3683V6.0 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.MS6M48.3B LED TV Board

T.MS6M48.3B is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separatley but ATV Card is builtin into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. T.MS6M48.3B firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: T.MS6M48.3B

Main Chip:

Product: LCD/LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Name:

Firmware Type:

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dumpfiles, or facing any issues during firmware installation then visit and read here first.

T.MS6M48.3B firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

MSTV2201-ZC01-01 LED TV Board

MSTV2201-ZC01-01 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separatley but ATV Card is builtin into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. MSTV2201-ZC01-01 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: MSTV2201-ZC01-01

Main Chip:

Product: LCD/LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Name:

Firmware Type:

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dumpfiles, or facing any issues during firmware installation then visit and read here first.

MSTV2201-ZC01-01 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

40-MT56FD-MAD2LG LED TV Board

40-MT56FD-MAD2LG USB update firmware versions are shared in this post.

Main Board: 40-MT56FD-MAD2LG

Software Version: V8-MT56552-LF1V

Board Type: Smart

Display Format: 1080 (FHD)

Refresh Rate: 60 Hz

Technical Specifications:

Resolution Supported: 1920×1080

CPU: Dual Core

GPU:

RAM:

ROM: EMMC

Operation System: Smart

Smart Features:

WIFI: Inbuilt

Ethernet: Yes

Audio Output: 16W

Tuner: ATV/DTV

AC Main Input: 220V

Power Consumption: 100W

Firmware Name: pkg

Firmware Type: OTA/USB Boot

Product User: TCL, Intex

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. You should first check the mainboard number then the hardware ID then the software version then you can load it. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first. No need to uncompress the zip file for an OTA update. Project ID will be required in some cases.

How to Download Firmware Files:

Download your required resolution and then extract it you will get the folder. Now copy the .img file to USB or use the compressed file for OTA update from the user factory menu. For more Details about the download process watch the video Click Here

40-MT56FD-MAD2LG Firmware file for free download;

• 40.MT56FD.MAD2LG 1920×1080-INTEX.part1
• 40.MT56FD.MAD2LG 1920×1080-INTEX.part2

SUPRA LT-24A300F LED TV

SUPRA LT-24A300F is a 24 inches HD Ready LED TV with a resolution of 1366×768. LT-24A300F is a non-smart tv. LT-24A300F led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. LT-24A300F has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. SUPRA Software file is given below for the technician’s support. For more SUPRA Software collection visit here.

General Specifications & Features:

Make: SUPRA

Model: LT-24A300F

Display Size: “24

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

SUPRA LT-24A300F Software file free download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

LAD.MV9.M LED TV Board

LAD.MV9.M is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets.This is a three in one Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. LAD.MV9.M firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: LAD.MV9.M

Main Chip:

Product: LCD/LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name:

Firmware Type:

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dumpfiles, or facing any issues during firmware installation then visit and read here first.

LAD.MV9.M firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

HK.T.RT2831P638 Smart LED TV Board

HK.T.RT2831P638 is a smart Android Intelligent Network LCD/LED TV Board. It is suitable for the LVDS interface and supports more than 42-65 inches LED panels, with maximum resolution up to 1920*1080. HK_T_RT2831P638 is a three-in-one (combo) board i.e. power card, backlight driver module, and ATV board is builtin in it.

HK-T-RT2831P638 has multiple input interface ports like USB, HDMI, AV, VGA port, and LAN port for wired internet connectivity. It is also built in a Wireless interface. HK T RT2986P61 came with some brand LED TVs like Magic TV Iraq, General TV Jordan, etc. Its USB interface can be used for loading software as well as for playing multimedia files. HK.T.RT2831P638 support for analog TV signals, and digital TV (DTMB new national standard). HK.T.RT2831P638 firmware file is given below for the technician’s support.

General Specifications:

Model: HK.T.RT2831P638

Main Chipset: RT283x

Resolution Supported: 1920×1080

CPU: Quad-core ARM core processor

OS: Android

Ram: 1Gb

Rom: 4Gb

Audio Output Power: 2X8 W (8Ω)

Backlight:

Backlight Power:

Service Code:

Firmware File: Install.img

Firmware Version:

333_2831P638_1G_4G_JPE_PT430CT01-1_Jordan_ATV_HD_201903071TWBZ_190324_123402_svn19495

Firmware Type: USB upgradeable Firmware

Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

HK.T.RT2831P638 Firmware file for Free Download:

Haier LED TV No Picture But Sound OK. How to Check and Confirm the Back Light Fault