Tag Archives: kazmi elecom

5823-A3M11G-0P00 LED TV Board

5823-A3M11G-0P00 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets.This is a three in one Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. 5823-A3M11G-0P00 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: 5823-A3M11G-0P00

Main Chip:

Product: LCD/LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name:

Firmware Type:

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dumpfiles, or facing any issues during firmware installation then visit and read here first.

5823-A3M11G-0P00 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

SUPRA STV-LC2485FL LED TV

SUPRA STV-LC2485FL is a 24 inches HD Ready LED TV with a resolution of 1366×768. STV-LC2485FL is a non-smart tv. STV-LC2485FL led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. STV-LC2485FL has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. SUPRA Software file is given below for the technician’s support. For more SUPRA Software collection visit here.

General Specifications & Features:

Make: SUPRA

Model: STV-LC2485FL

Display Size: “24

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

SUPRA STV-LC2485FL Software file free download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

TP.MS3463S.PB755 LED TV Board

TP.MS3463S.PB755 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets.This is a three in one Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. TP.MS3463S.PB755 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: TP.MS3463S.PB755

Main Chip:

Product: LCD/LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name:

Firmware Type:

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dumpfiles, or facing any issues during firmware installation then visit and read here first.

TP.MS3463S.PB755 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

5800-A6M35G-0P30 LED TV Board

5800-A6M35G-0P30 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separatley but ATV Card is builtin into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. 5800-A6M35G-0P30 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: 5800-A6M35G-0P30

Main Chip:

Product: LCD/LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Name:

Firmware Type:

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dumpfiles, or facing any issues during firmware installation then visit and read here first.

5800-A6M35G-0P30 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

CV960XH-A50 UHD LED TV Board

CV960XH-A50 is a 4K UHD LED TV driver board with a support resolution of 3840×2160. CV960XH_A50 is dedicated to 50/60 Hz screens. UHD TV With features to entertain ultra HD Wide-Screen. CV960XH_A50 has the full features of input interface connectivity. It has multiple ports like HDMI, AV, Headphones, VGA interface, Coaxial Out, USB ports, and RJ45 Ethernet port for wired internet connectivity. Its USB interface can be used for Firmware upgrades as well as for multimedia playback.

CV960XH.A is a digital and analog TV board, it can receive analogtelevision (PAL/SECAM) and digital television (DVB-T) signals. The CV960XH_A50 USB Upgrade Firmware file is given below for Technician’s support. CV960XH-A50 Main Board is used for Magic LED TV. CV960XH-A50 is also used for other Brands’ 4K Ultra HD LED TVs.

Specifications & Features:

Model Name: CV960XH – A50

Resolution: 3840×2160

OS: Android 7.1 Nougat

RAM: 1Gb

ROM: 8Gb

Aspect Ratio: 16:09

Audio Power Output: 16w (8×2)

System: PAL/SECAM/NTSC

Tuner:

HDMI: 3

USB Ports: 2

Power Rating: 220V~240V 50Hz/60Hz

Power Consumption: 150Watt

Standby Power: 0.5W

Firmware Name: aml_upgrade_package.img

Firmware Type: USB Upgrade Firmware, Factory Update

Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

CV960XH-A50 Firmware files for free download:

• CV960XH-A50-3840×2160-Magic-MG65Y21USFG-USB.part1
• CV960XH.A50-3840×2160-Magic-MG65Y21USFG-USB.part2
• CV960XH.A50-3840×2160-Magic65-Update-USB.part1
• CV960XH.A50-3840×2160-Magic65-Update-USB.part2
• CV960XH.A50-3840×2160-Magic-MG55Y21USFB&G-USB.part1
• CV960XH.A50-3840×2160-Magic-MG55Y21USFB&G-USB.part2
• CV960XH.A50-3840×2160-Magic58-Update-USB.part1
• CV960XH.A50-3840×2160-Magic58-Update-USB.part2
• CV960XH.A50_3840x2160_Magic55_Update.part1
• CV960XH.A50_3840x2160_Magic55_Update.part2
• CV960XH-A50_3840x2160_Magic55_Update.part3

SUPRA STV-LC40T700FL LED TV

SUPRA STV-LC40T700FL is a 40 inches HD Ready LED TV with a resolution of 1366×768. STV-LC40T700FL is a non-smart tv. STV-LC40T700FL led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. STV-LC40T700FL has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. SUPRA Software file is given below for the technician’s support. For more SUPRA Software collection visit here.

General Specifications & Features:

Make: SUPRA

Model: STV-LC40T700FL

Display Size: “40

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

SUPRA STV-LC40T700FL Software file free download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

JUC7.820.00205281 LED TV Board

JUC7.820.00205281 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets.This is a three in one Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. JUC7.820.00205281 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: JUC7.820.00205281

Main Chip:

Product: LCD/LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name:

Firmware Type:

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dumpfiles, or facing any issues during firmware installation then visit and read here first.

JUC7.820.00205281 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

SUPRA STV-LC1911WD LED TV

SUPRA STV-LC1911WD is a 19 inches HD Ready LED TV with a resolution of 1366×768. STV-LC1911WD is a non-smart tv. STV-LC1911WD led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. STV-LC1911WD has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. SUPRA Software file is given below for the technician’s support. For more SUPRA Software collection visit here.

General Specifications & Features:

Make: SUPRA

Model: STV-LC1911WD

Display Size: “19

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

SUPRA STV-LC1911WD Software file free download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

HK.T.RT2831P588 Smart LED TV Board

HK.T.RT2831P588 is a smart Android Intelligent Network LCD/LED TV Board. This board is best fit for HD and FHD LED screen panels, with maximum resolution up to 1920×1080 Full HD. HK_T_RT2831P588 is a three-in-one (combo) board i.e power card, backlight driver module, and ATV board is built in it. Full specification to support user, it has multiple input interfaces such as Wifi, Ethernet LAN, VGA, USB, HDMI, Headphones, and RCA input.

HK-T-RT2831P588 supports Laptop and PC connectivity by its VGA interface port, and LAN ports for wired internet connectivity. It is also built in a Wireless interface. Users can play their own choice multimedia files every time and also can upgrade software by the USB input interface. HK.T.RT2831P588 support for analog TV signals, and digital TV (DTMB new national standard). HK.T.RT2831P588 firmware file is given below for the technician’s support.

General Specifications:

Model: HK.T.RT2831P588

Main Chipset: RTD2831PSZ

Resolution Supported: 1920×1080

CPU: Quad-core ARM Cortex A53

GPU: Dual-Core

OS: Android 7.11

Ram: 1Gb

Rom: 8Gb

EMMC: THGBMDG5D1LBAIL

Audio Output Power: 2X8 W (8Ω)

Backlight:

Backlight Power:

Service Code:

Firmware File: Install.img

Firmware Type: USB upgradeable Firmware

Caution: 

All the pictures and specification details related to HK.T.RT2831P588 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home. If the LED TV is slow then reset it to Factory Default only.

Pros:

There are many advantages to installing the given HK.T.RT2831P588 USB software or eMMC backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given USB software or EMMC backup file
• Remote and Logo may change at your own choice to satisfy the customer
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given HK.T.RT2831P588 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Remote Control may not work and the Logo may change by writing the given software
• Panel screen parameters may be changed

HK.T.RT2831P588 Android Version Upgrade:

Please note that the installed version in this board is the final version and the Android version is not updateable. So, no need to upgrade the software if the board is working normally. Only if, the default software malfunctions due to some bugs will the manufacturer provide the software update. Otherwise, no version update is issued.

HK.T.RT2831P588 EMMC Backup:

This board has a 4/8GB eMMC chip. you can read the EMMC backup by Pendrive but for writing a backup of EMMC you should jtag the mainboard HK.T.RT2831P588 and write by a programming tool. Be careful while writing emmc backup file, if the board is on standby light due to wrong software or incomplete installation then you can do it, otherwise, it is on standby or red light due to hardware fault. So, first trace the fault. In this case, no need to write emmc backup.

HK.T.RT2831P588 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications, the newest Android version, and the latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable and EMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. For more Detail about the download process watch the video Click Here

HK.T.RT2831P588 Firmware file for Free Download:

Firmware File:

HK_T_RT2831P588_1920x1080_1G_8G\166_2831P588_1G_8G_PR180628A60S_HV320FHB-N00_CJ_T2_190926_160723_svn25549.zip

T.RT2984D.81 Smart Android LED TV Board

T.RT2984D.81 is a network smart dual tuner Android board. T_RT2984D_81 is a full HD smart board that can support 32-55-inch LCD/LED TVs. T-RT2984D-81 is a new Android single-chip solution from Realtek. It has ARM Quad-core A7 CPU/3DGPU and 512M DDR3. T RT2984D 81 supports external 4G EMMC. T.RT2984D.81 has multiple interface input ports such as multiple HDMI, Scart, AV, Dual USB, VGA input interface, and RJ45 Ethernet connector for wired internet connectivity.

T.RT2984D.81 has Miracast and DLNA supported. This is not a combo board so an external power module and backlight driver card are required for this board. Here is below T.RT2984D.81 firmware is available for the Technician’s support.

General Specifications:

Board Model: T.RT2984D.81

Supported Panels: 32-55 Inch

Display Format: 1080P (Full-HD)

Supported Resolution: 1920×1080

chipset: realtek_2984d

OS: Android 4.4

RAM: DDR3

ROM: eMMC

Main Processor CPU: ARM Cortex Dual-Core

GPU: Quad-Core

Audio Power Output: 2x8w (8ohm) (Nicam)

WIFI Antenna: Yes (Built-in)

TV Tuner: 2 TV-tuners (analog + digital), DVB-T / T2 / C tuner

Power Usage: 118W (In Operation)

Power Usage: <1 W (In Sleep Mode)

Firmware Name: allupgrade_2984.img

Firmware Type: USB Upgradeable

Firmware File:

CP92268_RT2984D_81_CHINA_1920_1080_IR_XYR_08_LOGO_YUNOS_AT_5901626e_20160128_145257.zip

Product: KKTV_K43

Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of your required resolution and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

TP.RT2982.PD811 Firmware for free download:

• T-RT2984D-81_1920x1080_YUNOS.part1
• T-RT2984D-81_1920x1080_YUNOS.part2