TP.SIS231.PT851 is an LCD/LED TV Board. It is suitable for the LVDS interface and supports more than 32-50 inches LED panels, with maximum resolution up to 1920*1080. TP_SIS231_PT851 is a three-in-one (combo) board i.e power card, backlight driver module, and ATV board builtin into it. TP-SIS231-PT851 has multiple input interface ports like USB, HDMI, AV, Scart port, and VGA port for computer connectivity. TP SIS231 PT851 for many brand LED TVs like Goldvision, Rolsen, Vivax, JVC, etc. Its USB interface can be used for loading software as well as for playing multimedia files. TP.SIS231.PT851 supports analog TV signals. TP.SIS231.PT851 firmware files are given below for the technician’s support.
General Specifications:
Model: TP.SIS231.PT851
Main Chipset: SIS231C1CI
Resolution Supported: 1920×1080
Flash Memory: 25Q64
Television System: PAL (BG, DK), SECAM (BG, DK, LL)
Tuner: DVB-T, DVB-C
Audio Output Power: 2X6 W (8Ω)
Backlight Current: 350mA
Backlight Power: 65 W
Power Input: 100 to 240V
Power Consumption: 75W
Service Code: Menu 1147, Balance (value is “0”) +1969
Flash Memory: 25Q64 (8Mb)
Firmware Name: SISEU23X8M.bin
Firmware Type: USB Bootable Firmware and Flash Backup Dump
Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download Firmware Files:
Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here
Here is below TP.SIS231.PT851 Firmware files for Free Download:
CV59H-A50 is a simple ATV Drive Board designed for LCD/LED TVs. This Board is suitable for the Asia Pacific and the Middle East markets. This is a Combo Board the main power module and LED Backlight Inverter module are in-built and the TV Tuner is placed into this PCB of the motherboard. This has all the features and connectivity interface as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Headphone jack. CV59H-A50 software files are given for the technician’s support.
General Specifications:
Brand/Mark: Universal FHD Board
Model: CV59H-A50
Main Chip: TSUMV59XU
Product: LED TV
LED Backlight: 84~102V
Backlight Current: 300mA
Flash IC: 4Mb
Screen supported: 48~65 inch
Resolution: Up to 1920×1080
Panel Voltage: 12V
Power Input: 220V AC
Service Code:
Menu+1147
Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out
Audio O/P Power: 2 x 5 Watt (8 ohms)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
VGA: Available
Tuner: Not Available
Electrical Parameters:
Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for the motherboard only)
Maximum Current for USB: 500mA
Factory Service Mode:
Source/Input 208
Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download Firmware File:
Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here
TP.MS6683T.PB756 is an Android network driver board with an FHD resolution of 1920×1080. It has a powerful wifi system. Smart FHD TV With Android Platform and great features to entertain Full HD Wide Screen with better-to-work SMART. TP MS6683T PB756 Smart Board has multiple ports, including A/V, USB interface ports, and many HDMI ports, in addition to VGA, Scart, and Earphones. TP-MS6683T-PB756 also has a LAN/RJ45 Connector interface port for the wired internet network.
TP_MS6683T_PB756 is a Combo Network Triple play board that has a Digital TV tuner built-in in it. The Graphics and Sound quality of the TP-MS6683T-PB756 Android board is very good and the Response rate is very efficient. TP MS6683T PB756 China smart network board can support up to 32″ to 43″ screen panels. TP.MS6683T.PB756 firmware is available for technician support.
Menu 1147, OR Input/Source 2580. For more Service Menu Codes visit Here.
Software update via USB
– Disconnect the TV from the AC power supply
– Prepare an empty USB drive (flash drive)
– Format the USB drive on your computer using the FAT32 file system (formatting will delete all data from the drive)
– Download the file to your computer’s memory
– The downloaded document is in “*.zip” archive format. Unzip it to get the file type “*.pkg”
– Rename the “*.pkg” file to “upgrade_loader.pkg”
– Copy the file to the prepared USB drive
– Insert the USB disk into the USB port of the TV
– Connect the TV to AC power
– Press the “ST.BY” button on the remote control until the update interface appears
– The software update process will begin.
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out
Audio O/P Power: 2 x 5 Watt (8 ohms)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
VGA: Not Available
Tuner: Not Available
Electrical Parameters:
Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for motherboard only)
Maximum Current for USB: 500mA
Factory Service Mode:
Source/Input 208
Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download Firmware File:
Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here
Sansui UHDTVSMN42QH0ZSA is a 42 inches 107cm Android Intelligent 4K Smart LED TV with a supported resolution of 3840×2160. Its screen refresh rate is 60 Hz. Sansui UHDTVSMN42QH0ZSA has a powerful wifi system. Smart UHD TV With Android Platform and great features to entertain ultra HD Wide Screen with better to work SMART.
Sansui SMN42QH0ZSA is a 4K original quad-core Android smart Mainboard. Sansui SMN42QH0ZSA has multiple Input interface ports like USB, HDMI, AV, Earphone out, PC VGA interface, and wifi built-in with an RJ45 ethernet port for wired internet connection and smooth connectivity. The Sansui UHDTVSMN42QH0ZSA firmware file is given below for the technician’s support.
General Specifications:
Make: Sansui
Model Name: UHDTVSMN42QH0ZSA
Resolution: 3840*2160 (2K*4K)
Aspect Ratio: 16:09
OS Version: Android 7.0
CPU: Quad-Core 1.4 GHz
Ram: 1 GB
Rom: GB
Audio Power Output: 20w (10×2)
System: PAL/NTSC
WIFI Antenna: Yes (Built-in)
Mirror: Yes
DLNA/Miracast: Yes
PC Compatible: Yes (via HDMI/VGA)
TV Tuner Input: 1
HDMI: 3
YPbPr: 1 YPBPR
AV IN: 2 AV
USB Ports: 3
Speaker Output RMS: 20 Watt
Power Rating: 100V~240V 50Hz/60Hz
Power Consumption: 110Watt
Firmware Type: USB Upgrade
Firmware Name: MstarUpgrade.bin
Main Board: MSD6A918-T8E
Note: The following UHDTVSMN42QH0ZSA firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download Sansui Firmware Files:
Download all parts of Sansui firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here
Sansui UHDTVSMN42QH0ZSA Firmware for free download:
VU Premium 4K LED TV. VU LED TV Brand is an established and very popular brand in the current Indian market. VU Premium LED TV 4K series UHD LED Technology with Super Slim Panel Smart LED TV has screen sizes 43, 50, 55, and 65 inches supported by a panel resolution of 3840×2160 Ultra High Definition. It supports an aspect ratio of 16:9. It has Android-Powered Operating System, Auto/ Manual channel tuning.
It has multiple connectivity interfaces for user requirements such as HDMI, USB, AV, VGA, Headphone Jack, and Ethernet connectivity, Supports Android apps from Google Play Store, Web Browser, Wifi connectivity, Air Mouse, Agile Remote App, and many more features. The VU Premium LED TV firmware file is given below for the Technician’s support.
Technical Specifications:
Brand Name: VU
Model: 43PM, 50PM, 55PM, 65PM
Screen Size: 43″, 50″, 55″, 65″
Resolution: 3840×2160 UHD
RAM: 2 GB
ROM: 16 Gb
CPU: CA53 1.35 GHz Dual Core
GPU: Mali T720 MP2
Operating System: Android 8.0/9.0
Wifi Connectivity: Yes
Ethernet Connectivity: Yes
Audio Output: 30 Watt (15W*2)
Power Supply: 50-60Hz, AC 100-240V
St.By Consumption: < 0.5W
Power Consumption: 100-165W
Firmware Type: USB Upgrade OTA
Firmware Name: upgrade_loader_sign_no_perm.pkg
Main Board:
OSD Language:
Note: Following VU Premium LED TV firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download VU Premium LED TV Firmware File:
Download all parts of the following VU Premium LED TV firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
VU Premium 4K LED TV UHD firmware for free download:
How to Load Firmware. Firmware is a software/program or set of instructions written/designed in a machine language that can run or command hardware. Here in this post, we will discuss LCD/LED TV Software/Firmware. How to Load Firmware, how to install firmware, and why we need this. Following are some points when we need to install the software. After reading this post you will be able to flash the firmware easily. So, you must read the post to know How to Load Firmware.
New board Installation as per your requirement
When need to change the resolution/remote control
If the program is malfunctioning
Red light board when software corrupts or stops working. Non-Smart TVs only
Logo Stuck in case of Android/Smart TV
What things are necessary to install the flash program or software:
Always save/keep a backup of old Flash before installing new program/software
Please keep in mind when loading/installing firmware:
Check the size of the software whether it is a dump file or a USB boot program
The dump file size is always the same as the size of a flash ic. For example, a 4MB flash has a dump file of 4MB (4096KB)
And if the software is a USB upgrade then its size will be less than 4MB
The dump file or backup file can be loaded by a programmer or USB upgrade method in the setting when the TV is working
Always use a USB2 slot for firmware installation where available
Always use branded and empty FAT32 Pen drive
The firmware size of smart/android is more than 100 Mbs while non-smart software size will be 1Mb, 2Mb, 4Mb, 8Mb, 16Mb, etc
Always transfer bin files with some text files to Pen drive without any Folder or ZIP file
Always check the ROM/RAM capacity before loading firmware
Always check the Remote Control and Logo information before loading the firmware
Do Not Turn it Off during software installation.
Firmware/Bin Name:
The board manufacturer develops the software with a specific name for each board. Some examples are given below
Do not rename the original bin name for non-smart board firmware
In the case of smart/android firmware, you can rename the Reference number like REF48 to SOS for universal boot
The backup dump file name can be renamed or written as you wish but better to write it as board name or TV brand name/model
Firmware/Bin Extension:
The file extension is the file type name that is written at the end of the file. The following extensions you will find in firmware files:
.bin, .img, .pkg
The file extension name may be different. it depends on the developer and how it packs the firmware files.
Steps For Installation in Non-Smart Board:
Transfer the required bin file to a formatted FAT32 USB disk
Connect IR/Keypad with Board
Connect the USB disk with the TV Board while the board is powered OFF
Now Power on the switch. The LED light indicator starts flashing automatically (color does not matter)
Wait to stop flashing the LED light. in some cases led flashing speed increased when completed
Remove the USB disk and release the standby
Done
Note. No Screen display during the software installation process in non-smart or universal TV boards
Steps For Installation in Smart/Android Board:
Transfer the required bin file to a formatted FAT32 USB disk
Connect IR/Keypad with Board
Connect the USB disk with the TV Board USB-2 Slot while the board is powered OFF
Now go through the following:
Method-1 How to Load Firmware:
Switch ON the TV and wait for Auto Boot
Installation progress will be displayed on the screen
After Completion, Switch off the TV and again Power it ON
Method-2 How to Load Firmware:
Press the power/standby button and Switch it ON. Hold the key until the screen displays the installation progress
After Completion, Switch off the TV and again Power it ON
Method-3 How to Load Firmware:
Press the VOL+/VOL- Key and Switch it ON. Hold the key until the screen displays the installation progress
After Completion, Switch off the TV and again Power it ON
Method-4 How to Load Firmware:
Switch ON the TV then Press the Power/standby key to release standby and immediately press and hold the VOL+/VOL- key
USB will boot and then release the key
After Completion, Switch off the TV and again Power it ON
Method-5 How to Load Firmware:
Remove the TV plug from Electricity and connect the pen drive to the TV USB socket
Plug in the TV to Electricity release the standby from the remote and immediately press and hold the power key in the Remote until you get the Software upgrading popup
Wait till the TV reboots the Home page
NOTE:
The software can be installed without a screen/panel
Some boards do not need to switch off after complete installation
Some boards just need to standby release after completion of the software
Some boards do not have any screen display installation progress bar. so, in this case, just follow the LED light flashing
If you are new and do not have enough knowledge of loading or installing software/firmware or dumping files then visit your nearest service center first. Kazmi Elecom team is not responsible in case of any damage or loss.
BIN Name with BOARD Name:
T.R85.031 YDG.8501.bin
T.R83.031 YDG.8503.bin
T.VST59.031 bin_v59.bin
T.VST29.031 MSTFLASH.bin
TP.VST59S.PB781 bin_v59s.bin
TP.MT5510S.PB782 allupgrade_5510_8G_1G_ref75
HK.T.RT2841P631 install.img
T.MT5510S.82 allupgrade_5522_8G_1G.pkg
T.HV553.81 allupgrade_v553_8G_1G.bin
T.HV510.81 allupgrade_v510_1G_100.bin
TP.MS628.PC821 allupgrade628_45
TP.AND_TERM.PB818 allupgrade_and_term_MAX57.pkg
4704-m608t9-a5233k01 MstarUpgrade.bin
CV960XH-A50 aml_upgrade_package.img
CV338H-A42 CtvUpgrade.bin
TP.MS338.PB801 allupgrade_msd338
P50-338TV5.0 messi.bin
P65-358TV6.0 MST358O.bin
P50-368V5.0 MTK368P.bin
VS.SP35851 MSD6A358AXG VS_S358XX.bin
VS.SP35851 MSD6A358ATG VS_S358AT.bin
Questions and Answers (Q&A) How to Load Firmware:
Q. When I tried to upgrade 1% says upgrading error!!?
A. Memory Size (RAM/ROM) Mismatch. Load appropriate firmware.
Q: Does USB size matter?
A: No, USB size does not matter. But the file system must be FAT32.
Q. During Firmware Installation, it said “loading data 1%” and stuck?
A. Memory Size (RAM/ROM) Mismatch. Load appropriate firmware.
Q. I have started booting the television but it’s showing only 1% loading data and not moving at all?
A. Memory Size (RAM/ROM) Mismatch. Load appropriate firmware.
Q. I am trying to load firmware but the USB disk does not boot.
A. Make sure, the USB disk is FAT32 formatted and empty. Otherwise, change the USB disk
Q. kabhi 41 Percent pe Stuck ho jata hy or LCD restart ho Jati hy. Or kabhi 60% pe Upgrading error aa jata hy?
A. Change the USB Disk or Pen drive
Q. My smart LED TV is on Red light. Should I install firmware?
A. No. Hardware Issue.
Q. Should I load the firmware first and then the resolution file?
A. No, the firmware and resolution files are the same. just install it as per your panel resolution
Q. Screen displays an Upgrade Error during software installation. what should I do?
A. Change the Pen drive or USB disk.
Q. Non-Smart TV hang on Logo. what should I do?
A. Clean the System IC or rewrite the firmware.
Q. Non-Smart TV is on Red Light only. what should I do?
A. First, check all board voltage. If found ok then write firmware.
Q. Smart LED TV, when powered on it is restarting continuously without display?
A. Check the Main Board Power Supply.
Q. Firmware not loading even the red light blinks.what should I do?
A. Make sure the bin files are in a USB disk without any folder. USB disk or Program may also not be compatible.
Q. After the Software, TV On, Sound comes but the display screen blue, green, red, and white colors. What should I do?
A. Resolution mismatch. check panel resolution then load proper firmware.
Q. I am Unable to Load Firmware by USB Ped Drive 3.0. Why?
A. Most TVs do not boot by USB 3.0 Pendrive. So, Use 2.0 Pendrive FAT32 Only.
For Video tutorials visit my YouTube channel “Kazmi Elecom”
Artel 32/9000 Smart LED TV with a diagonal of 32 inches (81 cm) has an HD resolution of 1366×768 that provides good transmission of high-quality images. The sound power is 20W, the contrast ratio is 3000: 1, and the viewing angle is 178 degrees. A large number of inputs allows you to connect additional devices to watch your favorite movies. The TV is equipped with HDMI ports, USB, antenna input, component, composite and audio input for PC.
The “SMART” function will expand the capabilities of this model and provide Internet access for watching video content and searching for news. Artel TV LED 32/9000 Smart is equipped with Digital Tuner+Satellite tuner DVB-T / T2, DVB-C, DVB-S / S2 (with MPEG4 support).
General Specifications:
Make: ARTEL
Model: 32/9000
Size: 32″
Main Board: 40-MT56AT-MAA2HG 3MT655A1S2A
OS: Linux
CPU: Quad-Core
Memory: THGBMDG5D1LBAIL
Resolution: 1366×768
Multi-Languages:
Audio Output: 2x8W
Digital Tuner: DVB-T / T2, DVB-C
Satellite Tuner: DVB-S / S2 (with MPEG4 support)
AC Power: 110-240V, 50/60 Hz
Power Consumption: 55W
Software Version: V8-MT56552-LF1V320
Firmware File: V8-MT56552-LF1V320.pkg
Firmware Type: USB Upgradeable Firmware, EMMC Backup Dump
Product: ARTEL
Note: The following TCL 32S6500S Software/firmware is USB upgradeable and emmc backup file also. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download Artel 32/9000 Firmware file:
Download all parts of the following Artel 32/9000 Software/firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
TP.VST59T.PB768 is a universal LCD/LED Board that has Full HD resolution Supported up to 1920×1080. TP_VST59T_PB768 is a combo board which means the main power supply, ATV board, and LED backlight driver board is a built-in single PCB. TP-VST59T-PB768 firmware files are given below for the technician’s support.
General Specifications:
Brand/Mark: China Universal
Model: TP.VST59T.PB768
Main Chip: TSUMV59XUT-ZI
TV System: PAL\SECAM\NTSC PLAYBACK
Product: LED TV
Input Voltage: 220V AC
MAX Backlight Watt: 48W
Backlight voltage:
Resolution: up to 1920×1080
Firmware Name: bin_v59t.bin
Firmware Type: USB Upgrade and Backup Dump
Service Menu:
Menu 1147
Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Details about the download, process watch the video Click Here
