Tag Archives: kazmi elecom

CV9202H-X LED TV Board

CV9202H-X is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Non-Combo Board. The main power module and LED Back light Inverter Circuit module are required seperatley but ATV Card is builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.CV9202H-X firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CV9202H-X

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

CV9202H-X firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

TP.HV510.PC822 Android 4K Board

TP.HV510.PC822 is a Smart WIFI Network Intelligent 4k Triple LED TV Board that is suitable for the Middle East and Asian Markets. TP_HV510_PC822 can support up to 3840×2160 Ultra High Definition (UHD) Resolution. TP-HV510-PC822 is compatible with 42 inches to 65-inch screen panels. TP HV510 PC822 has many universal connectivity interfaces and multiple input ports like Dual AV, Dual HDMI, Dual USB, VGA input, etc.

A special port is given for external SD card memory. RJ45 Connector is available for wired internet connection. Its WIFI reception is very strong. Audio and Video Quality of TP.HV510.PC822 is very good. TP.HV510.PC822 is a triple board that has a backlight driver, ATV module, and power supply built-in in a single card. TP.HV510.PC822 firmware file and emmc backup file are given below for the technician’s support

Technical Specifications:

Brand/Mark: China Universal 4K Three-In-One Motherboard

Main Board Model: TP.HV510.PC822

Backlight :  111-180V 80W 500mA

OS: Android 4.4, 5.1, 7.1

CPU Frequency: 1.2 GHz

GPU Frequency: 432 MHz (4 Core GPU)

Ram: 1Gb DDR

Rom: 4/8 Gb eMMC

Screen Supported: 42″ to 65″

Resolution: up to 3840X2160 UHD

Service Code: 2580

Power Consumption: 108 Watt

Firmware Type: USB Upgrade, EMMC Backup

Firmware File: allupgrade_v510_1G_47.bin

Note: Following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

TP.HV510.PC822 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

DAHUA DHI-NVR2104HS-P-S2 NVR

DAHUA DHI-NVR2104HS-P-S2 NVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

DAHUA DHI-NVR2104HS-P-S2 NVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of DAHUA DHI-NVR2104HS-P-S2 NVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

DAHUA DHI-NVR2104HS-P-S2 NVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

PANDA AHB7808R-MS-ZS V1.03 DVR

PANDA AHB7808R-MS-ZS V1.03 DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

PANDA AHB7808R-MS-ZS V1.03 DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of PANDA AHB7808R-MS-ZS V1.03 DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

PANDA AHB7808R-MS-ZS V1.03 DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

CV9202H-BPW LED TV Board

CV9202H-BPW is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required seperatley but ATV Card is builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.CV9202H-BPW firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CV9202H-BPW

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

CV9202H-BPW firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

DNS M32DM8 LED TV

DNS M32DM8 is a 32 inches HD Ready LED TV with a resolution of 1366×768. M32DM8 is a non-smart tv. M32DM8 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. M32DM8 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DNS Software file is given below for the technician’s support. For more DNS Software collection visit here.

General Specifications & Features:

Make: DNS

Model: M32DM8

Display Size: “32

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

JUC7.820.00080881 LED TV Board

JUC7.820.00080881 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.JUC7.820.00080881 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: JUC7.820.00080881

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

JUC7.820.00080881 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

ITV.V59.A81.13 Universal Board

ITV.V59.A81.13 is a universal jumper board with multi-resolution panel screen-supported software.

Basic Info:

Model No. ITV.V59.A81.13

Main Chipset: TSUMV29LU

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Tuner:

Sound: 1517P

Bin Name:

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Copy the Required Firmware/software into the FAT32 USB Disk
Plugin the U disk into the Mainboard USB port of the LCD/LED TV
Switch ON the power and Wait until even the IR indicator LED stops flashing
Done. Unplug the U-disk (It will take a maximum of half a minute to upgrade firmware)

Factory Service Mode:

Menu+1147

Note:  The following firmware is a backup dump and can be written by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required resolution file and then extract it you will get the folder. For More Details about the download process, watch the video Click Here

ITV.V59.A81.13 Firmware All resolutions Free Download:

• ITV.V59.A81.13 1024×768-Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

HK-T.SP9202P63 LED TV Board

HK-T.SP9202P63 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.HK-T.SP9202P63 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: HK-T.SP9202P63

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

HK-T.SP9202P63 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

DNS S42DE55 LED TV

DNS S42DE55 is a 42 inches HD Ready LED TV with a resolution of 1366×768. S42DE55 is a non-smart tv. S42DE55 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. S42DE55 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DNS Software file is given below for the technician’s support. For more DNS Software collection visit here.

General Specifications & Features:

Make: DNS

Model: S42DE55

Display Size: “42

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: ST309PX-T3

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.