Tag Archives: kazmi elecom

DEXP H32B3100E LED TV

DEXP H32B3100E is a 32 inches HD Ready LED TV with a resolution of 1366×768. H32B3100E is a non-smart tv. H32B3100E led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. H32B3100E has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DEXP Software file is given below for the technician’s support. For more DEXP Software collection visit here.

General Specifications & Features:

Make: DEXP

Model: H32B3100E

Display Size: “32

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: TP.VST59S.PB816

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV106L_V3.1 LED TV Board

CV106L_V3.1 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required seperatley but ATV Card is builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.CV106L_V3.1 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CV106L_V3.1

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

CV106L_V3.1 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

DEXP F40B7000E LED TV

DEXP F40B7000E is a 40 inches HD Ready LED TV with a resolution of 1366×768. F40B7000E is a non-smart tv. F40B7000E led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. F40B7000E has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DEXP Software file is given below for the technician’s support. For more DEXP Software collection visit here.

General Specifications & Features:

Make: DEXP

Model: F40B7000E

Display Size: “40

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:CV512H-B42

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

ECON EX-40FT003B LED TV

ECON EX-40FT003B is a 40 inches HD Ready LED TV with a resolution of 1366×768. EX-40FT003B is a non-smart tv. EX-40FT003B led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. EX-40FT003B has additional edge led technology, smart power saving, ECON noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. ECON Software file is given below for the technician’s support. For more ECON Software collection visit here.

General Specifications & Features:

Make: ECON

Model: EX-40FT003B

Display Size: “40

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: JUC7.820.00217480

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

5800-A5M54A-0P00 LED TV Board

5800-A5M54A-0P00 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required seperatley but ATV Card is builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.5800-A5M54A-0P00 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: 5800-A5M54A-0P00

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

5800-A5M54A-0P00 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

HK-T.MSTV59V08 LED TV Board

HK-T.MSTV59V08 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately, but the ATV Card is built into this motherboard. This board has all the features as per the latest requirements, like HDMI input, USB interface, PC input, Component Input, TV, and Scart.

HK-T.MSTV59V08 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: HK.T.MSTV59V08

Main Chip: V59

Product: LED TV

LED Backlight: mA

Flash IC: 4 Mb

Sound Chip: 1517

Tuner IC: NA

Screen supported: 19-24 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

HK-T.MSTV59V08 firmware for free download:

• HK.T.MSTV59V08 ORION-19-DUMP
• HK.T.MSTV59V08-AKAI-19-DUMP
• HK.T.MSTV59V08-ORION-22-DUMP
• HK.T.MSTV59V08-ORION-24-DUMP
• HK.T.MSTV59V08 VECTOR-13-DUMP
• HK.T.MSTV59V08 VECTOR-15-DUMP
• HK.T.MSTV59V08 E-BODA-17-DUMP
• HK.T.MSTV59V08 LEKO-19-DUMP
• HK.T.MSTV59V08 LEKO-24-DUMP

DAHUA DH-HCVR5108H DVR

DAHUA DH-HCVR5108H DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

DAHUA DH-HCVR5108H DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of DAHUA DH-HCVR5108H DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

DAHUA DH-HCVR5108H DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

HK.T.S2T512CP638 LED TV Board

HK.T.S2T512CP638 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.HK.T.S2T512CP638 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: HK.T.S2T512CP638

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

HK.T.S2T512CP638 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

JOVISION T8008_MB V1.0 DVR

JOVISION T8008_MB V1.0 DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

JOVISION T8008_MB V1.0 DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of JOVISION T8008_MB V1.0 DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

JOVISION T8008_MB V1.0 DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

DEXP 19A3100 LED TV

DEXP 19A3100 is a 19 inches HD Ready LED TV with a resolution of 1366×768. 19A3100 is a non-smart tv. 19A3100 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. 19A3100 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DEXP Software file is given below for the technician’s support. For more DEXP Software collection visit here.

General Specifications & Features:

Make: DEXP

Model: 19A3100

Display Size: “19

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: CV9202L-T

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.