Tag Archives: kazmi elecom

DNS S29DB1 LED TV

DNS S29DB1 is a 29 inches HD Ready LED TV with a resolution of 1366×768. S29DB1 is a non-smart tv. S29DB1 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. S29DB1 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DNS Software file is given below for the technician’s support. For more DNS Software collection visit here.

General Specifications & Features:

Make: DNS

Model: S29DB1

Display Size: “29

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: T.MSD309.BA3T

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

AHB7016T-GS-V3 V2.03 DVR

AHB7016T-GS-V3 V2.03 DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

AHB7016T-GS-V3 V2.03 DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of AHB7016T-GS-V3 V2.03 DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

AHB7016T-GS-V3 V2.03 DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

AS-MST6M182VG-LE1 TV Board

AS-MST6M182VG-LE1 board is used in many TV brand models. This is a non-smart board with SPI flash memory also not the android platform. It is a Full HD mainboard with a resolution of 1920×1080. It has power full stereo audio output of 16 watts. AS-MST6M182VG-LE1 has multiple connectivity ports like HDMI, AV, USB, VGA, and RJ45 for Ethernet connectivity. It can support a WiFi USB dongle for wireless connectivity. This main board is used in several models of TCL, Panasonic, Condor, Tornado, etc.

General Specifications:

Make: China

Main Board: AS-MST6M182VG-LE1

OS: Linux

CPU:

Memory: 4 MB SPI Flash

Resolution: 1920×1080

Multi-Languages: Yes

Power Consumption: W

Audio Output: 2x8W stereo

Software Version:

Firmware File:

Firmware Type: Backup Dump

Note: The following given Software/firmware is USB upgradeable and Nand Memory Backup Dump File. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the main board and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given Software/firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

AS-MST6M182VG-LE1  firmware  free download:

DNS K32A619 LED TV

DNS K32A619 is a 32 inches HD Ready LED TV with a resolution of 1366×768. K32A619 is a non-smart tv. K32A619 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. K32A619 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DNS Software file is given below for the technician’s support. For more DNS Software collection visit here.

General Specifications & Features:

Make: DNS

Model: K32A619

Display Size: “32

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: KL32GT618-LCD-196YTK

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

DIGITAL DLE-2227 LED TV

DIGITAL DLE-2227 is a 22 inches HD Ready LED TV with a resolution of 1366×768. DLE-2227 is a non-smart tv. DLE-2227 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. DLE-2227 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DIGITAL Software file is given below for the technician’s support. For more DIGITAL Software collection visit here.

General Specifications & Features:

Make: DIGITAL

Model: DLE-2227

Display Size: “22

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: T.VST29.A3B

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

4715-V53536-A2233K01 LED TV Board

4715-V53536-A2233K01 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets.This is a three in one Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. 4715-V53536-A2233K01 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: 4715-V53536-A2233K01

Main Chip:

Product: LCD/LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name:

Firmware Type:

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dumpfiles, or facing any issues during firmware installation then visit and read here first.

4715-V53536-A2233K01 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

HIKVISION DS-7204HQHI-F1-N DVR

HIKVISION DS-7204HQHI-F1-N DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

HIKVISION DS-7204HQHI-F1-N DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of HIKVISION DS-7204HQHI-F1-N DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

HIKVISION DS-7204HQHI-F1-N DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

DOFFLER 24CH14-T2 LED TV

DOFFLER 24CH14-T2 is a 24 inches HD Ready LED TV with a resolution of 1366×768. 24CH14-T2 is a non-smart tv. 24CH14-T2 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. 24CH14-T2 has additional edge led technology, smart power saving, DOFFLER noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DOFFLER Software file is given below for the technician’s support. For more DOFFLER Software collection visit here.

General Specifications & Features:

Make: DOFFLER

Model: 24CH14-T2

Display Size: “24

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: CV512-Q24

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

DEXP 40A7100 LED TV

DEXP 40A7100 is a 40 inches HD Ready LED TV with a resolution of 1366×768. 40A7100 is a non-smart tv. 40A7100 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. 40A7100 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DEXP Software file is given below for the technician’s support. For more DEXP Software collection visit here.

General Specifications & Features:

Make: DEXP

Model: 40A7100

Display Size: “40

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: MSD309B-T9B 4704-309BT9-A3235K01 A3

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

DEXP F40B7000C LED TV

DEXP F40B7000C is a 40 inches HD Ready LED TV with a resolution of 1366×768. F40B7000C is a non-smart tv. F40B7000C led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. F40B7000C has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DEXP Software file is given below for the technician’s support. For more DEXP Software collection visit here.

General Specifications & Features:

Make: DEXP

Model: F40B7000C

Display Size: “40

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: TP.S512.PB83

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.