Tag Archives: kazmi elecom

DEXP F22D7200E LED TV

DEXP F22D7200E is a 22 inches HD Ready LED TV with a resolution of 1366×768. F22D7200E is a non-smart tv. F22D7200E led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. F22D7200E has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DEXP Software file is given below for the technician’s support. For more DEXP Software collection visit here.

General Specifications & Features:

Make: DEXP

Model: F22D7200E

Display Size: “22

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: TP.MS3663S.PA671

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

5800-A6M64E-0P10 LED TV Board

5800-A6M64E-0P10 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.5800-A6M64E-0P10 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: 5800-A6M64E-0P10

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

5800-A6M64E-0P10 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

DEXP 32A3400 LED TV

DEXP 32A3400 is a 32 inches HD Ready LED TV with a resolution of 1366×768. 32A3400 is a non-smart tv. 32A3400 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. 32A3400 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DEXP Software file is given below for the technician’s support. For more DEXP Software collection visit here.

General Specifications & Features:

Make: DEXP

Model: 32A3400

Display Size: “32

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: CV59SH-E32

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

DEXP H24B7100E LED TV

DEXP H24B7100E is a 24 inches HD Ready LED TV with a resolution of 1366×768. H24B7100E is a non-smart tv. H24B7100E led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. H24B7100E has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DEXP Software file is given below for the technician’s support. For more DEXP Software collection visit here.

General Specifications & Features:

Make: DEXP

Model: H24B7100E

Display Size: “24

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: CV512L-B

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

OLI 7804T-1MB T4-3520D-6134C-ZS DVR

OLI 7804T-1MB T4-3520D-6134C-ZS DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

OLI 7804T-1MB T4-3520D-6134C-ZS DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of OLI 7804T-1MB T4-3520D-6134C-ZS DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

OLI 7804T-1MB T4-3520D-6134C-ZS DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

DEXP H32B3400ED LED TV

DEXP H32B3400ED is a 32 inches HD Ready LED TV with a resolution of 1366×768. H32B3400ED is a non-smart tv. H32B3400ED led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. H32B3400ED has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DEXP Software file is given below for the technician’s support. For more DEXP Software collection visit here.

General Specifications & Features:

Make: DEXP

Model: H32B3400ED

Display Size: “32

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: CV59SH-E32

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

DEXP F22B7200C LED TV

DEXP F22B7200C is a 22 inches HD Ready LED TV with a resolution of 1366×768. F22B7200C is a non-smart tv. F22B7200C led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. F22B7200C has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. DEXP Software file is given below for the technician’s support. For more DEXP Software collection visit here.

General Specifications & Features:

Make: DEXP

Model: F22B7200C

Display Size: “22

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board: JUC7.820.00143963

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

DIGITAL VIDEO GR-6304T-LM DVR

DIGITAL VIDEO GR-6304T-LM DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most cases, the video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red light. In this situation, there may be a hardware fault or software issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

DIGITAL VIDEO GR-6304T-LM DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Observe that the main PCB board and chassis version are the same as you are looking for and also check the main system processor. If everything is fine then read the backup first of the old program and then write SPI Flash. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In such cases, the only option is to write a given backup dump file.

Technical Specifications of DIGITAL VIDEO GR-6304T-LM DVR:

Manufacturer/Make/Brand Name: DIGITAL VIDEO

DVR/NVR Model: GR-6304T-LM

Chassis/Main Board: NA

Chipset/System IC/Processor: Hi-Silicon

Channel/Ports: CH

Software Version: NA

SPI Flash Memory: 8 MB

Interface: VGA, HDMI, RCA, RJ45, BNC

Power Supply Input: 12C-4Amp

Power Consumption: 15w without HDD

Caution: 

All the pictures and specification details related to the DIGITAL VIDEO GR-6304T-LM DVR in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without installing the Backup File. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

DIGITAL VIDEO GR-6304T-LM DVR Version Upgrade:

Please note that the installed version in this DVR is the final version that will operate normally. Mostly the manufacturer releases updates to fix the bugs in the previous version or adds some new features and applications for customer satisfaction and smooth working of the DVRs. Please note that the following given DIGITAL VIDEO GR-6304T-LM DVR program backup file is not for upgrade purposes.

Pros:

There are some advantages to installing the given DIGITAL VIDEO GR-6304T-LM DVR backup dump file. A few benefits are described below:

• The dead DVR can be recovered and operational by loading the given Backup Dump File
• Money saving instead of changing the DVR mainboard
• Time-saving instead of arranging a new DVR board
• The customer satisfaction to do an urgent job by installing the backup file

Cons:

There may be some disadvantages to writing the given DIGITAL VIDEO GR-6304T-LM DVR backup dump file. A few drawbacks are described below:

• The working DVR may go to the standby position or dead
• The DVR manufacturer logo and some features may change
• Video channels may be out of order
• No display for some cameras

Note: The following DIGITAL VIDEO GR-6304T-LM DVR program is a backup file that can be written by a programming tool or loaded by a loader tool. First, read the original Flash file and save it. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

DIGITAL VIDEO GR-6304T-LM DVR Software Backup File Free Download.

DAHUA DH-XVR5108HS DVR

DAHUA DH-XVR5108HS DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red light. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

DAHUA DH-XVR5108HS DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of DAHUA DH-XVR5108HS DVR:

Manufacturer/Make/Brand Name: DAHUA

DVR/NVR Model: DH-XVR5108HS

Chassis/Main Board: D162555_101

Chipset/System IC/Processor:

Channel/Ports: 8 CH

Software Version:

SPI Flash Memory: MX25L128

Interface: VGA, HDMI, RCA, RJ45, BNC

Power Supply Input: 12Volt-4Amp DC

Power Consumption: 15w without HDD

Caution: 

All the pictures and specification details related to the DAHUA DH-XVR5108HS DVR in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without installing the Backup File. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

DAHUA DH-XVR5108HS DVR Version Upgrade:

Please note that the installed version in this DVR is the final version that will operate normally. Mostly the manufacturer releases updates to fix the bugs in the previous version or adds some new features and applications for customer satisfaction and smooth working of the DVRs. Please note that the following given DAHUA DH-XVR5108HS DVR program backup file is not for upgrade purposes.

Pros:

There are some advantages to installing the given DAHUA DH-XVR5108HS DVR backup dump file. A few benefits are described below:

• The dead DVR can be recovered and operational by loading the given Backup Dump File
• Money saving instead of changing the DVR mainboard
• Time-saving instead of arranging a new DVR board
• The customer satisfaction to do an urgent job by installing the backup file

Cons:

There may be some disadvantages to writing the given DAHUA DH-XVR5108HS DVR backup dump file. A few drawbacks are described below:

• The working DVR may go to the standby position or dead
• The DVR manufacturer logo and some features may change
• Video channels may be out of order
• No display for some cameras

Note: The following DAHUA DH-XVR5108HS DVR program is a backup file that can be written by a programming tool or loaded by a loader tool. First, read the original Flash file and save it. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

DAHUA DH-XVR5108HS DVR Software Backup File Free Download.

DAHUA DH-NVR4216-4K NVR

The DAHUA DH-NVR4216-4K NVR backup file is posted here in this post for the support of technicians who need to recover or repair DVR/NVR. In most cases, the video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red light. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

DAHUA DH-NVR4216-4K NVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis is the same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of DAHUA DH-NVR4216-4K NVR:

Manufacturer/Make/Brand Name: DAHUA

DVR/NVR Model: DH-NVR4216-4K

Chassis/Main Board: 40_07380146860N1411

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory: 32 MB

Power Input: 12 Volt 4 Amp

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

DAHUA DH-NVR4216-4K NVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.