Tag Archives: kazmi elecom

T.MS3391.A2B LED TV Board

T.MS3391.A2B is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required seperatley but ATV Card is builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.T.MS3391.A2B firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: T.MS3391.A2B

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

T.MS3391.A2B firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.MS18VG.21B Universal Board

T.MS18VG.21B is a universal jumper board with multi-resolution panel screen supported software.

Basic Info:

Model No. T.MS18VG.21B

Main Chipset:

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Tuner:

Sound:

Bin Name:

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Copy the Required Firmware/software into FAT32 USB Disk
Plugin the U disk into the Mainboard USB port of the LCD/LED TV
Switch ON the power and Wait until even the IR indicator led stops flashing
Done. Unplug the U-disk (It will take a max half min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

T.MS18VG.21B Firmware All resolutions Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.M3663.81 Universal Board

T.M3663.81 is a universal jumper board with multi-resolution panel screen supported software.

Basic Info:

Model No. T.M3663.81

Main Chipset:

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Tuner:

Sound:

Bin Name:

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Copy the Required Firmware/software into FAT32 USB Disk
Plugin the U disk into the Mainboard USB port of the LCD/LED TV
Switch ON the power and Wait until even the IR indicator led stops flashing
Done. Unplug the U-disk (It will take a max half min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

T.M3663.81 Firmware All resolutions Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

SSDV3241-ZC01-01 LED TV Board

SSDV3241-ZC01-01 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. This is a Combo Board. The main power module, LED Backlight Inverter Circuit module, and ATV Card are built into this motherboard.

This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. SSDV3241.ZC01-01 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: SSDV3241_ZC01_01

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

SSDV3241-ZC01-01 firmware for free download:

• SSDV3241.ZC01.01-CHANGHONG-24-DUMP
• SSDV3241.ZC01.01-CHANGHONG-32-DUMP
• SSDV3241.ZC01.01-CONDOR-DUMP
• SSDV3241.ZC01.01-HAIER-22-DUMP
• SSDV3241.ZC01.01-HAIER-24-DUMP
• SSDV3241.ZC01.01-HAIER-28-DUMP
• SSDV3241.ZC01.01-HAIER-29-DUMP
• SSDV3241.ZC01.01-HAIER-32-DUMP
• SSDV3241.ZC01.01-KROHLER-32-DUMP
• SSDV3241.ZC01.01-MGS-22-DUMP

SINHO 090-V26080-04 LED TV Board

SINHO 090-V26080-04 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required seperatley but ATV Card is builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.SINHO 090-V26080-04 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: SINHO 090-V26080-04

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

SINHO 090-V26080-04 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

RSAG7.820.6037 LED TV Board

RSAG7.820.6037 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. This is a Combo Board. The main power module, LED Backlight Inverter Circuit module, and ATV Card are built into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.RSAG7.820.6037 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: RSAG7-820-6037

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

RSAG7.820.6037 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

JUC7.820.00125910 LED TV Board

JUC7.820.00125910 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required seperatley but ATV Card is builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.JUC7.820.00125910 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: JUC7.820.00125910

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

JUC7.820.00125910 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

MSDV3218-ZC01-01 LED TV Board

MSDV3218-ZC01-01 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.MSDV3218-ZC01-01 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: MSDV3218-ZC01-01

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

MSDV3218-ZC01-01 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Micromax L55TA7000UHD LED TV

Micromax L55TA7000UHD is a 55-inch 139.7 cm LED Ultra HD (4K) Certified Android TV. It has a 4K Ultra HD resolution of 3840×2160 and a Refresh Rate is 60 hertz. It has 2 HDMI ports to connect set-top box, Blu-Ray players, and gaming console, and 2 USB ports to connect hard drives and other USB devices and play multimedia as well. It has Dolby DTS Support 30 Watts sound output and HDR Display viewing. Micromax L55TA7000UHD has Smart TV Features as Certified Android, Google Play Store, Google Voice Search, Remote with Voice & Air Mouse also have Front Firing Speakers.

The Micromax L55TA7000UHD firmware files are given below for free of cost download.

General Features & Specifications:

Brand: Micromax

Model: L55TA7000UHD

Display Size: 55 inch

Screen Type: LED

Features Format: Smart

OS Version: Android

Processor: Quad Core

Graphic Processor:

RAM Capacity: GB

Storage Memory: GB

Screen Resolution: 4K 3840×2160 (Ultra Hd)

No of HDMI Ports: 3

No of USB Ports: 2

Wi-Fi Type: Wi-Fi

Built-In Wi-Fi: Yes

Ethernet (RJ45): Yes

Speaker Output RMS: 20W (10W*2)

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: 160 W

Firmware Type: USB Update

Firmware Name: Update_MMX_V8-T658TAP-LF1V372_sign.pkg

Firmware Version: V8-T658TAP-LF1V372

How to Install:

1. Copy the software file to USB/Pen Drive & eject it safely from the system.
2. The TV should be switched Off (No power connection) & connect Pen Drive.
3. Press & Hold Standby Key(Power Key) & then connect AC Plug to Socket.
4. Once the Red Light starts blinking slowly, the Standby Key should be released. And the Software will start updating.
5. In approx 15-20 minutes, the Red light will start blinking fast.
6. Now remove the power connection from the TV, then remove Pen Drive.

Note: The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

MICROMAX L55TA7000UHD Firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

RSAG7.820.5082 LED TV Board

RSAG7.820.5082 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required seperatley but ATV Card is builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.RSAG7.820.5082 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: RSAG7.820.5082

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

RSAG7.820.5082 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.