Tag Archives: kazmi elecom

ZS.3663LA.A8R00 Universal Board

ZS.3663LA.A8R00 is a universal jumper board with multi-resolution panel screen-supported software. ZS.3663LA.A8R00 is suitable for Europe, Africa, the five Central Asian countries, the Middle East, Russia, Thailand, Burma, Kenya, Portugal, Malta, Uganda, and other countries or regions. A special feature is to support digital signals and Russia. Rafael R842 tuner supports T-2, DVB-T, DVB-C, and ATV, by just saying it supports more signal, teletext, and TV radio.

Basic Info:

Model No. ZS.3663LA.A8R00

Main Chipset: LUA63A82

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Tuner: R842

Sound: 2x8W

Bin Name: LUA63A82.Bin

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Video Input: TV: DVB-T / T2, DVB-C, ANALOG TV (ATV)/HDMI/VGA /AV/YPbPr

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Copy the Required Firmware/software into the FAT32 USB Disk
Plugin the U disk into the Mainboard USB port of the LCD/LED TV
Switch ON the power and Wait until even the IR indicator LED stops flashing
Done. Unplug the U-disk (It will take a maximum of half min to upgrade firmware)

Factory Service Mode:

Input 2580

Note:  The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download the required resolution as per your panel specifications and then extract it you will get the folder. Now transfer the bin file in this folder to a USB disk and load firmware. For More Details about the download process, watch the video Click Here

ZS.3663LA.A8R00 Firmware All resolutions Free Download:

• ZS-3663LA-A8R00 1024×768-USB
• ZS-3663LA-A8R00 1280×1024-USB
• ZS-3663LA-A8R00 1366×768-USB
• ZS-3663LA-A8R00 1440×900-USB
• ZS-3663LA-A8R00 1600×900-USB
• ZS-3663LA-A8R00 1680×1050-USB
• ZS-3663LA-A8R00 1920×1080-USB
• ZS-3663LA-A8R00 1920×1200-USB

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ZS.63W.BKR00 Universal Board

ZS.63W.BKR00 is a universal jumper board with multi-resolution panel screen-supported software.

Basic Info:

Model No. ZS.63W.BKR00

Main Chipset: LW3663

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Tuner:

Sound:

Bin Name: LW36BKC01.bin

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Copy the Required Firmware/software into the FAT32 USB Disk
Plugin the U disk into the Mainboard USB port of the LCD/LED TV
Switch ON the power and Wait until even the IR indicator LED stops flashing
Done. Unplug the U-disk (It will take a max half a minute to upgrade firmware)

Factory Service Mode:

Input 2580

Note:  The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download the required resolution as per your panel specifications and then extract it you will get the folder. Now transfer the bin file in this folder to a USB disk and load firmware. For More Details about the download process, watch the video Click Here

ZS.63W.BKR00 Firmware All resolutions Free Download:

• ZS.63W.BKR00 1366×768-USB
• ZS.63W.BKR00 1920×1080-USB

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ZS.63W.A8R00 Universal Board

ZS.63W.A8R00 is a universal jumper board with multi-resolution panel screen-supported software.

Basic Info:

Model No. ZS.63W.A8R00

Main Chipset: 3663LW

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Tuner:

Sound:

Bin Name: LW36A8C05.bin

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Copy the Required Firmware/software into the FAT32 USB Disk
Plugin the U disk into the Mainboard USB port of the LCD/LED TV
Switch ON the power and Wait until even the IR indicator LED stops flashing
Done. Unplug the U-disk (It will take a max half a minute to upgrade firmware)

Factory Service Mode:

Input 2580

Note:  The following firmware is USB bootable and Backup Dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download the required resolution as per your panel specifications and then extract it you will get the folder. Now transfer the bin file in this folder to a USB disk and load firmware. For More Details about the download process, watch the video Click Here

ZS.63W.A8R00 Firmware All resolutions Free Download:

• ZS-63W-A8R00 1024×600-USB
• ZS-63W-A8R00 1024×768-USB
• ZS-63W-A8R00 1280×768-USB
• ZS-63W-A8R00 1280×800-USB
• ZS-63W-A8R00 1280×1024-USB
• ZS-63W-A8R00 1366×768-USB
• ZS-63W-A8R00 1400×1050-USB
• ZS-63W-A8R00 1440×900-USB
• ZS-63W-A8R00 1600×900-USB
• ZS-63W-A8R00 1600×1200-USB
• ZS-63W-A8R00 1680×1050-USB
• ZS-63W-A8R00 1920×1080-USB
• ZS-63W-A8R00 1920×1200-USB

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

YTD190R-1 LED TV Board

YTD190R-1 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required seperatley but ATV Card is builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.YTD190R-1 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: YTD190R-1

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

YTD190R-1 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

VTX-TP.VST5972 LED TV Board

VTX-TP.VST5972 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.VTX-TP.VST5972 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: VTX-TP.VST5972

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

VTX-TP.VST5972 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

VTX-TP.VST5971-V1.4 LED TV Board

VTX-TP.VST5971-V1.4 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.VTX-TP.VST5971-V1.4 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: VTX-TP.VST5971-V1.4

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

VTX-TP.VST5971-V1.4 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

VTX-TP.VST59S91-V1.2 LED TV Board

VTX-TP.VST59S91-V1.2 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.VTX-TP.VST59S91-V1.2 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: VTX-TP.VST59S91-V1.2

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

VTX-TP.VST59S91-V1.2 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

VTX-TP.VST59S81-V1.6 LED TV Board

VTX-TP.VST59S81-V1.6 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.VTX-TP.VST59S81-V1.6 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: VTX-TP.VST59S81-V1.6

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

VTX-TP.VST59S81-V1.6 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

VTX-TP.VST59S81-V1.5 LED TV Board

VTX-TP.VST59S81-V1.5 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required seperatley but ATV Card is builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.VTX-TP.VST59S81-V1.5 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: VTX-TP.VST59S81-V1.5

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

VTX-TP.VST59S81-V1.5 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

VTX-TP.VST59.PB756 LED TV Board

VTX-TP.VST59.PB756 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets.This is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.VTX-TP.VST59.PB756 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: VTX-TP.VST59.PB756

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

VTX-TP.VST59.PB756 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.