Tag Archives: kazmi elecom

FITCO FLED-24DN4 LED TV

FITCO FLED-24DN4 is a 24 inches HD Ready LED TV with a resolution of 1366×768. FLED-24DN4 is a non-smart tv. FLED-24DN4 LED TV has all the latest features and connectivity ports as HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is very good as vertically 160 degrees and horizontally 170 degrees. FLED-24DN4 has a lower response time as low as 5 mili second. It has some extra features as well like Digital Noise Reduction, Comb Filter, and Intelligent picture scan. Contract, sharpness, and brightness are very good. FITCO Software file is given below for the technician’s support.

General Specifications & Features:

Make: FITCO

Model: FLED-24DN4

Display Size: 24″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Supply Input: 240 V AC

Power Consumption: 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Caution: 

All the pictures and specification details related to FITCO FLED-24DN4 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

Pros:

There are many advantages to installing the given FITCO FLED-24DN4 USB software or backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given software backup file
• The Original Remote and Logo as per the model specifications
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given FITCO FLED-24DN4 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Version change may cause trouble
• Panel screen parameters may be changed
• FITCO FLED-24DN4 Version Upgrade:

Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only if, the default software is malfunctioning due to some bugs then the manufacturer will provide the software update. Otherwise, no version update is issued.

FITCO FLED-24DN4 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then a universal china non-combo board can be installed in it. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.

How to Load Firmware

FITCO FLED-24DN4 Software file free download.

For video tutorials, visit “Kazmi Elecom” on my YouTube channel.

FITCO FLED-32SM1 LED TV

FITCO FLED-32SM1 is a 32 inches HD Ready LED TV with a resolution of 1366×768. FLED-32SM1 is a non-smart tv. FLED-32SM1 LED TV has all the latest features and connectivity ports as HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is very good as vertically 160 degrees and horizontally 170 degrees. FLED-32SM1 has a lower response time as low as 5 mili second. It has some extra features as well like Digital Noise Reduction, Comb Filter, and Intelligent picture scan. Contract, sharpness, and brightness are very good. FITCO Software file is given below for the technician’s support.

General Specifications & Features:

Make: FITCO

Model: FLED-32SM1

Display Size: 32″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Supply Input: 240 V AC

Power Consumption: 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Caution:

All the pictures and specification details related to FITCO FLED-32SM1 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

Pros:

There are many advantages to installing the given FITCO FLED-32SM1 USB software or backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given software backup file
• The Original Remote and Logo as per the model specifications
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given FITCO FLED-32SM1 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Version change may cause trouble
• Panel screen parameters may be changed
• FITCO FLED-32SM1 Version Upgrade:

Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only if, the default software is malfunctioning due to some bugs then the manufacturer will provide the software update. Otherwise, no version update is issued.

FITCO FLED-32SM1 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then a universal china non-combo board can be installed in it. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.

How to Load Firmware

FITCO FLED-32SM1 Software file free download.

For video tutorials, visit “Kazmi Elecom” on my YouTube channel.

FITCO FLED-22SM1 LED TV

FITCO FLED-22SM1 is a 22 inches HD Ready LED TV with a resolution of 1366×768. FLED-22SM1 is a non-smart tv. FLED-22SM1 LED TV has all the latest features and connectivity ports as HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is very good as vertically 160 degrees and horizontally 170 degrees. FLED-22SM1 has a lower response time as low as 5 mili second. It has some extra features as well like Digital Noise Reduction, Comb Filter, and Intelligent picture scan. Contract, sharpness, and brightness are very good. FITCO Software file is given below for the technician’s support.

General Specifications & Features:

Make: FITCO

Model: FLED-22SM1

Display Size: 22″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Supply Input: 240 V AC

Power Consumption: 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Caution: 

All the pictures and specification details related to FITCO FLED-22SM1 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

Pros:

There are many advantages to installing the given FITCO FLED-22SM1 USB software or backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given software backup file
• The Original Remote and Logo as per the model specifications
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given FITCO FLED-22SM1 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Version change may cause trouble
• Panel screen parameters may be changed
• FITCO FLED-22SM1 Version Upgrade:

Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only if, the default software is malfunctioning due to some bugs then the manufacturer will provide the software update. Otherwise, no version update is issued.

FITCO FLED-22SM1 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then a universal china non-combo board can be installed in it. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.

How to Load Firmware

FITCO FLED-22SM1 Software file free download.

For video tutorials, visit “Kazmi Elecom” on my YouTube channel.

T.MT5522.81 UHD LED TV Board

T.MT5522.81 is an Android smart 4K network drive LED TV board with a supported screen resolution of 3840×2160. It is dedicated to 60 and 120 Hz screens. T-MT5522S-81 has an inbuilt wifi system chipset mounted on the main PCB. It is a Non-Combo Board that can support 55-65-inch screens. T_MT5522_81 is an original smart Android Mediatek Quad-Core processor 4K  resolution LED TV Mainboard. It can receive ATV signals only.

T.MT5522 81 has multiple Input interface ports like dual USB, three HDMI inputs, AV, Earphone out, PC VGA interface, and wifi built-in with an RJ45 ethernet port for wired internet connection and smooth internet surfing. T.MT5522S.82 is a very popular board mostly used for Ergo, Akai, Nordmende, and other UHD LED TVs, etc.

General Specifications:

Model Name: T.MT5522.81 

Resolution: 3840×2160

Aspect Ratio: 16:09

OSD language: English

OS Version: Android 7.1 Nogut

CPU: Quad-Core

Ram: 1 GB

Rom: 8 GB

Audio Power Output: 20w (10×2)

System: PAL/SECAM/NTSC

WIFI: WIFI-2-M06USA1

PC Compatible: Yes

TV Tuner Input: ATV DVB-S / S2-DVB-T / C / T2 × 2

HDMI: 3

YPbPr: 1 YPBPR (Mini)

AV IN: 1 AV

Video output: (Mini) CVBS

USB Ports: 2

Power Rating: 100V~240V 50Hz/60Hz

Power Consumption: 108Watt

Factory Mode: Menu 1147

Firmware Name: allupgrade_5522_8G_1G.pkg

Firmware Type: USB upgradeable, T.MT5522.81 Program Data USB

Caution: 

All the pictures and specification details related to T.MT5522S.81 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home. If the LED TV is slow then reset it to Factory Default only.

Pros:

There are many advantages to installing the given T.MT5522.81 USB software or eMMC backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given USB software or EMMC backup file
• Remote and Logo may change at your own choice to satisfy the customer
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given T.MT5522.82 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Remote Control may not work and the Logo may change by writing the given software
• Panel screen parameters may be changed

T.MT5522.81 Android Version Upgrade:

Please note that the installed version in this board is the final version and the Android version is not updateable. So, no need to upgrade the software if the board is working normally. Only if, the default software malfunctions due to some bugs will the manufacturer provide the software update. Otherwise, no version update is issued.

T.MT5522.81 EMMC Backup:

This board has a 8GB eMMC chip. you can read the EMMC backup by Pendrive but for writing a backup of EMMC you should jtag the mainboard T.MT5522S.81 and write by a programming tool. Be careful while writing emmc backup file, if the board is on standby light due to wrong software or incomplete installation then you can do it, otherwise, it is on standby or red light due to hardware fault. So, first trace the fault. In this case, no need to write emmc backup.

T.MT5522.81 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications, the newest Android version, and the latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable and EMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of your required resolution and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

T.MT5522.81 Firmware for free download:

Compatible Software:

• TP.MT5522S.PC822-3840×2160-Polarine
• T.MT5522S.82-3840×2160-Nordmende-1G-8G
• T.MT5522S.82-3840×2160-Akai-1G-8G
• TP.MT5522.PC821-3840×2160-Polarine-Ref60

IRIS 32E510S Smart LED TV

IRIS 32E510S is a semi-smart HD Ready LED TV. IRIS-32E510S has a resolution supported by 1366×768. NAND flash memory is used in this TV Board. IRIS_SAT_32E510S has multiple ports like AV, HDMI, USB, VGA, and Ethernet LAN ports for wired internet connectivity. IRIS SAT 32E510S Firmware file is given below for the technician’s support.

IRIS 32E510S is best for gaming. Its refresh rate is 60Hz. All Digital devices can be connected with this LED TV such as Gaming Consoles, STBs, Play stations, Digital Cameras, Blu-ray players, etc. This LED TV can also support Analog device connectivity by composite input interface.

General Specifications:

Brand: IRIS SAT, Skyworth

Model: 32E510S

Main Board: 5800-A6M88G-0P00 VER00.01

Resolution: 1366×768 HD

Nand Flash Memory: TC58NVG1S3HTA00

Input Voltage: 110 to 240V AC

Power Consumption: 45W

Firmware Type: USB Boot and Backup Dump

Firmware Name: MstarUpgrade.bin

Note: Following the given firmware are the USB upgrade file and the Backup Dump file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

IRIS 32E510S Firmware for Free Download:

• IRIS SAT-32E510S-Nand-Dump
• IRIS SAT-32E510S-Firmware-USB

FITCO FLED-325M1 LED TV

FITCO FLED-325M1 is a 32 inches HD Ready LED TV with a resolution of 1366×768. FLED-325M1 is a non-smart tv. FLED-325M1 LED TV has all the latest features and connectivity ports as HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is very good as vertically 160 degrees and horizontally 170 degrees. FLED-325M1 has a lower response time as low as 5 mili second. It has some extra features as well like Digital Noise Reduction, Comb Filter, and Intelligent picture scan. Contract, sharpness, and brightness are very good. FITCO Software file is given below for the technician’s support.

General Specifications & Features:

Make: FITCO

Model: FLED-325M1

Display Size: 32″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Supply Input: 240 V AC

Power Consumption: 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Caution: 

All the pictures and specification details related to FITCO FLED-325M1 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

Pros:

There are many advantages to installing the given FITCO FLED-325M1 USB software or backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given software backup file
• The Original Remote and Logo as per the model specifications
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given FITCO FLED-325M1 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Version change may cause trouble
• Panel screen parameters may be changed
• FITCO FLED-325M1 Version Upgrade:

Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only if, the default software is malfunctioning due to some bugs then the manufacturer will provide the software update. Otherwise, no version update is issued.

FITCO FLED-325M1 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then a universal china non-combo board can be installed in it. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.

How to Load Firmware

FITCO FLED-325M1 Software file free download.

For video tutorials, visit “Kazmi Elecom” on my YouTube channel.

FITCO FLED-40ES3 LED TV

FITCO FLED-40ES3 is a 40 inches HD Ready LED TV with a resolution of 1366×768. FLED-40ES3 is a non-smart tv. FLED-40ES3 LED TV has all the latest features and connectivity ports as HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is very good as vertically 160 degrees and horizontally 170 degrees. FLED-40ES3 has a lower response time as low as 5 mili second. It has some extra features as well like Digital Noise Reduction, Comb Filter, and Intelligent picture scan. Contract, sharpness, and brightness are very good. FITCO Software file is given below for the technician’s support.

General Specifications & Features:

Make: FITCO

Model: FLED-40ES3

Display Size: 40″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Supply Input: 240 V AC

Power Consumption: 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Caution: 

All the pictures and specification details related to FITCO FLED-40ES3 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

Pros:

There are many advantages to installing the given FITCO FLED-40ES3 USB software or backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given software backup file
• The Original Remote and Logo as per the model specifications
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given FITCO FLED-40ES3 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Version change may cause trouble
• Panel screen parameters may be changed
• FITCO FLED-40ES3 Version Upgrade:

Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only if, the default software is malfunctioning due to some bugs then the manufacturer will provide the software update. Otherwise, no version update is issued.

FITCO FLED-40ES3 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then a universal china non-combo board can be installed in it. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.

How to Load Firmware

FITCO FLED-40ES3 Software file free download.

For video tutorials, visit “Kazmi Elecom” on my YouTube channel.

FITCO FLED-19DN6A LED TV

FITCO FLED-19DN6A is a 19 inches HD Ready LED TV with a resolution of 1366×768. FLED-19DN6A is a non-smart tv. FLED-19DN6A LED TV has all the latest features and connectivity ports as HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is very good as vertically 160 degrees and horizontally 170 degrees. FLED-19DN6A has a lower response time as low as 5 mili second. It has some extra features as well like Digital Noise Reduction, Comb Filter, and Intelligent picture scan. Contract, sharpness, and brightness are very good. FITCO Software file is given below for the technician’s support.

General Specifications & Features:

Make: FITCO

Model: FLED-19DN6A

Display Size: 19″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Supply Input: 240 V AC

Power Consumption: 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Caution: 

All the pictures and specification details related to FITCO FLED-19DN6A in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

Pros:

There are many advantages to installing the given FITCO FLED-19DN6A USB software or backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given software backup file
• The Original Remote and Logo as per the model specifications
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given FITCO FLED-19DN6A USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Version change may cause trouble
• Panel screen parameters may be changed
• FITCO FLED-19DN6A Version Upgrade:

Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only if, the default software is malfunctioning due to some bugs then the manufacturer will provide the software update. Otherwise, no version update is issued.

FITCO FLED-19DN6A Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then a universal china non-combo board can be installed in it. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.

How to Load Firmware

FITCO FLED-19DN6A Software file free download.

For video tutorials, visit “Kazmi Elecom” on my YouTube channel.

FITCO FLED-2021B LED TV

FITCO FLED-2021B is a 20 inches HD Ready LED TV with a resolution of 1366×768. FLED-2021B is a non-smart tv. FLED-2021B LED TV has all the latest features and connectivity ports as HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is very good as vertically 160 degrees and horizontally 170 degrees. FLED-2021B has a lower response time as low as 5 mili second. It has some extra features as well like Digital Noise Reduction, Comb Filter, and Intelligent picture scan. Contract, sharpness, and brightness are very good. FITCO Software file is given below for the technician’s support.

General Specifications & Features:

Make: FITCO

Model: FLED-2021B

Display Size: 20″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Supply Input: 240 V AC

Power Consumption: 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Caution:

All the pictures and specification details related to FITCO FLED-2021B in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

Pros:

There are many advantages to installing the given FITCO FLED-2021B USB software or backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given software backup file
• The Original Remote and Logo as per the model specifications
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given FITCO FLED-2021B USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Version change may cause trouble
• Panel screen parameters may be changed
• FITCO FLED-2021B Version Upgrade:

Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only if, the default software is malfunctioning due to some bugs then the manufacturer will provide the software update. Otherwise, no version update is issued.

FITCO FLED-2021B Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then a universal china non-combo board can be installed in it. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.

How to Load Firmware

FITCO FLED-2021B Software file free download.

For video tutorials, visit “Kazmi Elecom” on my YouTube channel.

FITCO FLED-19S95A LED TV

FITCO FLED-19S95A is a 19 inches HD Ready LED TV with a resolution of 1366×768. FLED-19S95A is a non-smart tv. FLED-19S95A LED TV has all the latest features and connectivity ports as HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is very good as vertically 160 degrees and horizontally 170 degrees. FLED-19S95A has a lower response time as low as 5 mili second. It has some extra features as well like Digital Noise Reduction, Comb Filter, and Intelligent picture scan. Contract, sharpness, and brightness are very good. FITCO Software file is given below for the technician’s support.

General Specifications & Features:

Make: FITCO

Model: FLED-19S95A

Display Size: 19″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Supply Input: 240 V AC

Power Consumption: 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Caution: 

All the pictures and specification details related to FITCO FLED-19S95A in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

Pros:

There are many advantages to installing the given FITCO FLED-19S95A USB software or backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given software backup file
• The Original Remote and Logo as per the model specifications
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given FITCO FLED-19S95A USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Version change may cause trouble
• Panel screen parameters may be changed
• FITCO FLED-19S95A Version Upgrade:

Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only if, the default software is malfunctioning due to some bugs then the manufacturer will provide the software update. Otherwise, no version update is issued.

FITCO FLED-19S95A Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then a universal china non-combo board can be installed in it. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.

How to Load Firmware

FITCO FLED-19S95A Software file free download.

For video tutorials, visit “Kazmi Elecom” on my YouTube channel.