Tag Archives: kazmi elecom

MANTA LED4804 LED TV

MANTA LED4804 is a 48 inches HD Ready LED TV with a resolution of 1366×768. LED4804 is a non-smart tv. LED4804 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is MANTAal: 170 degrees and vertical: 160 degrees. LED4804 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. MANTA Software file is given below for the technician’s support. For more MANTA Software collection visit here.

General Specifications & Features:

Make: MANTA

Model: LED4804

Display Size: 48″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

MANTA LED4804 Software Free Download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

P75-2831V6.0 Smart LED TV Board

P75-2831V6.0 is a high-speed smart network DVB-T2 universal driver board with an FHD resolution of 1920×1080. It is dedicated to 26″ to 49″ screens. It has a powerful wifi system. Smart FHD TV features With Android Platform and great features to entertain Full HD Wide Screen with better to work SMART feature. P75-2831 V6.0 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to VGA, Scart, and Headphones also. P75_2831_V6.0 has a LAN/RJ45 Ethernet Connector interface port also for the wired/cable internet network.

P75 2831 V6.0 is a Combo high-speed Network Triple play motherboard that has the  ATV, Backlight Driver Board, and Power Supply Module built-in in it. The Video and Sound quality of the P75-2831-V6.0 android board are very good and the Response rate is very efficient. P75.2831.V6.0 china smart network board has an android 7.1 version. P75-2831V6.0 board bifurcated into two types according to its configuration that is given in the picture below.

Specifications & Features:

Brand/Mark: FHD Smart LED TV Main Board

Main Board Model: P75-2831V6.0

Main Chipset: RTD284

Interface: Single/Dual LVDS

TV System:  DVB-T/T2/S/S2/C

Operating System: Android 7.1

CPU: ARM Cotex A53 Four Core

CPU Frequency: 1.4GHz

GPU: Multi-core Mali -470MP2

Ram: 1Gb

Rom: 8Gb eMMC

Backlight: 45 watt

Audio Output: 2x8w (8 Ω)

Resolution: up to 1920×1080 (26” to 49″)

Panel Power: 12V

Power Input: 100-240V AC

Firmware Type: USB Upgrade

Firmware Name: install.img

Note: The following given Software/Firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of installing/downloading the firmware/software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of your required resolution and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch video Click Here

P75-2831V6.0 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Universal Smart Android Board Installation Guide With Original 40 Inches SONY LED TV

*35021636 Smart FHD LED TV Board

*35021636 is a non-combo DVB-T FHD LED TV Android Board. It has supported a Full HD resolution of 1920×1080 and a Refresh Rate of 60 hertz. It is a non-combo board and has all connectivity interfaces like triple HDMI input ports, Mini RCA input, SD card reader, RJ 45 Connection, and dual USB input ports by which users can connect external hard disks and other USB devices and play multimedia as well. It has Dolby DTS Support 20 Watts sound output and HDR Display viewing.

*35021636 can support Smart TV Features such as Android, Google Play Store, Google Voice Search, Remote with Voice & Air Mouse, and also has Front Firing Speakers and 3D mode. *35021636 firmware files are given below for free of cost download to support technicians.

General Features & Specifications:

Brand: China

Board Model: *35021636

Display Format: FHD 1080P

Screen Type: LED

Features Format: Smart

OS Version: Android 4.4

Chipset: Mstar MSD6369IV

Processor: Dual Core

Graphic Processor: Quad-core

RAM Capacity: GB DDR3

Storage Memory: GB ROM

Screen Resolution: 1920×1080

No of HDMI Ports: 3

No of USB Ports: 2

Wi-Fi Type: Wi-Fi

Built-In Wi-Fi: Yes

Ethernet (RJ45): Yes

Speaker Output RMS: 20W (10W*2)

Tuner: MXL601

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: 120 W

Firmware Type: USB Update

Firmware Name: MstarUpgrade.bin

Product: Kogan KALED49SMTZA

Caution: 

All the pictures and specification details related to *35021636 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home. If the LED TV is slow then reset it to Factory Default only.

Pros:

There are many advantages to installing the given *35021636 USB software or eMMC backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given USB software or EMMC backup file
• Remote and Logo may change at your own choice to satisfy the customer
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given *35021636 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Remote Control may not work and the Logo may change by writing the given software
• Panel screen parameters may be changed

*35021636 Android Version Upgrade:

Please note that the installed version in this board is the final version and the Android version is not updateable. So, no need to upgrade the software if the board is working normally. Only if, the default software malfunctions due to some bugs will the manufacturer provide the software update. Otherwise, no version update is issued.

*35021636 EMMC Backup:

This board has a 4/8GB eMMC chip. you can read the EMMC backup by Pendrive but for writing a backup of EMMC you should jtag the mainboard *35021636 and write by a programming tool. Be careful while writing emmc backup file, if the board is on standby light due to wrong software or incomplete installation then you can do it, otherwise, it is on standby or red light due to hardware fault. So, first trace the fault. In this case, no need to write emmc backup.

*35021636 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications, the newest Android version, and the latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable and EMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

*35021636 Firmware for free download:

• 35021636-1920×1080-KOGAN-KALED49SMTZA-USB.part1
• 35021636-1920×1080-KOGAN-KALED49SMTZA-USB.part2

MICROMAX 40 CANVAS-S3

Micromax 40 Canvas-S3 is a 40 inches Full HD Smart LED TV with a resolution of 1920×1080. Micromax L40CANVAS-S3 is a smart android platform-led tv with all the latest features and connectivity ports as 2 HDMI ports and 2 USB ports with wifi and Ethernet connectivity. It has a powerful sound output system Class D Amp With Stereo Digital Processing with two speakers of 16 watts.

The Micromax 40 Canvas S3 firmware file is given below for the technician’s support.

General Features & Specifications:

Brand: Micromax

Model: L40CANVAS-S3, 40 CANVAS S3

Display Size: 40 inches

Screen Type: LED

Series: Canvas

Features Format: Smart

Processor: Quad-Core

Graphic Processor: Dual Core

RAM Capacity: 1 GB

Storage Memory: 4 GB

Screen Resolution: 1920×1080

No of HDMI Ports: 2

No of USB Ports: 2

Wi-Fi Type: Wi-Fi Direct

Built-In Wi-Fi: Yes

Ethernet (RJ45): Yes

Speaker Output RMS: 16W (8W*2)

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: 75 W

Firmware Type: USB Update

Firmware File: CS244991_DG_KONKA_KG40MI628N_MS338_PB801_M216H1_L01_IR_HJR_KE20_LOGOMICROMAR_4G_REF56_ba74efdb_20180402_145128

Firmware Name: allupgrade_msd338_4G_1G_ref56.bin

Main Board: TP.MS338.PB801

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, verify the installed board in your tv then load firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download MICROMAX 40 CANVAS-S3 Firmware :

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

MICROMAX 40CANVAS-S3 Firmware for free download:

• Micromax-40-CANVAS-S3-Firmware-USB.part1
• Micromax-40-CANVAS-S3-Firmware-USB.part2

FOSVISION RS-AT2508N-A1 DVR

FOSVISION RS-AT2508N-A1 DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

FOSVISION RS-AT2508N-A1 DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of FOSVISION RS-AT2508N-A1 DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

FOSVISION RS-AT2508N-A1 DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

P65-358TV6.0 Smart Android LED TV Board

P65-358tv6.0 is a Combo (Multi in one Controller board), which integrates the power supply Module, LED backlight driver, and TV Module board. The RF can receive the TV signal from the ATV. It can be used for smart network television, suitable for the Indian and Asian markets. 32-inch BOE T-con less panel is directly compatible with this board. P65.358tv6.0 supports RJ45, USB 2.0, AV in, YPbPr, VGA, HDMI 1.4, and ATV network signal.

It also supports WiFi access and mini AV output, coaxial, headphone output, and standard Bluetooth 4.2. It is suitable for Bluetooth-receiving multimedia audio players. P65 358tv6.0 supports multi-languages, English is default but other languages (French, Spanish, Portuguese, Russian) are optional. The P65-358tv6.0 firmware file is given below for the support of technicians.

General Specifications:

Brand/Make: Semicon

Model: P65-358tv6.0

Resolution: 1366×768

Chipset: MSD6A358AXG

Android Version: 6.0 Marshmallow

CPU: Quad-Core

GPU: Multi-core Mali

RAM: 1 GB

Rom: 4/8 GB

Supported Languages: English, French, Spanish, Portuguese, Russian

Power Input: 100v-260 v 50/60 Hz

Speaker output: 16w (8+8)

Power Consumption: 65 watt

Firmware Type: USB Update

Firmware: MstarUpgrade.bin

Product User: Onida/India, Fresh

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

P65-358tv6.0 firmware file for free download:

Firmware File:

M029_32HIW1_MSD6A358_142B_P65_358V60_1G_8G_HV320WHB-N86_RC325_zeason.sh

*35017841 FHD Smart LED TV Board

*35017841 is a non-combo DVB-T FHD LED TV Android Board. It has supported a Full HD resolution of 1920×1080 and a Refresh Rate is 60 hertz. It has multiple HDMI ports to connect a set-top box, Blu-Ray players, and gaming console, and also have more than one USB port to connect hard drives and other USB devices and play multimedia as well. It has Dolby DTS Support 20 Watts sound output and HDR Display viewing.

*35017841 can support Smart TV Features such as Android, Google Play Store, Google Voice Search, Remote with Voice & Air Mouse also have Front Firing Speakers, and 3D mode with passive image reproduction technology, 2D to 3D video conversion mode, etc. *35017841 firmware files are given below for free of cost download to support technicians.

General Features & Specifications:

Brand: China

Board Model: *35017841

Display Format: FHD 1080P

Screen Type: LED

Features Format: Smart

OS Version: Android

Chipset: Mstar MSD6369IV

Processor: Dual Core

Graphic Processor: Quad-core

RAM Capacity: GB DDR3

Storage Memory: GB ROM

Screen Resolution: 1920×1080

No of HDMI Ports: 4

No of USB Ports: 3

Wi-Fi Type: Wi-Fi

Built-In Wi-Fi: Yes

Ethernet (RJ45): Yes

Speaker Output RMS: 20W (10W*2)

Tuner: MXL601

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: 100 W

Firmware Type: USB Update

Firmware Name: MstarUpgrade.bin

Product: DNS, Wansa

Note: Following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

*35017841 Firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Smart LED TV Mstar Android Recovery. Recover Boot Loop Smart LED TV without Loading Software

*35017328 FHD LED TV Board

*35017328 is a non-combo FHD LED TV Android Board. It has supported an FHD resolution of 1920×1080 and a Refresh Rate is 60 hertz. It has multiple HDMI ports to connect a set-top box, Blu-Ray players, and gaming console, and also have more than one USB port to connect hard drives and other USB devices and play multimedia as well. It has Dolby DTS Support 20 Watts sound output and HDR Display viewing.

*35017328 can support Smart TV Features such as Android, Google Play Store, Google Voice Search, Remote with Voice & Air Mouse also have Front Firing Speakers, and 3D mode with passive image reproduction technology, 2D to 3D video conversion mode, etc. *35017328 firmware files are given below for free of cost download to support technicians.

General Features & Specifications:

Brand: China

Board Model: *35017328

Display Format: FHD 1080P

Screen Type: LED

Features Format: Smart

OS Version: Android

Chipset: Mstar

Processor: Dual Core

Graphic Processor: Quad-core

RAM Capacity: GB DDR3

Storage Memory: GB ROM

Screen Resolution: 1920×1080

No of HDMI Ports: 4

No of USB Ports: 2

Wi-Fi Type: Wi-Fi

Built-In Wi-Fi: Yes

Ethernet (RJ45): Yes

Speaker Output RMS: 20W (10W*2)

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: 100 W

Firmware Type: USB Update

Firmware Name: MstarUpgrade.bin

Product: Dexp, DNS, Enie, Konka

Note: Following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

*35017328 Firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Smart LED TV Mstar Android Recovery. Recover Boot Loop Smart LED TV without Loading Software

*35020444 UHD LED TV Board

*35020444 is a non-combo LED Ultra HD (4K) Certified Android TV Board. It has a 4K Ultra HD resolution of 3840×2160 and a Refresh Rate is 60 hertz. It has 2 HDMI ports to connect a set-top box, Blu-Ray players, a gaming console, and 3 USB ports to connect hard drives and other USB devices and play multimedia as well. It has Dolby DTS Support 20 Watts sound output and HDR Display viewing.

*35020444 can support the Smart TV Features as Android, Google Play Store, Google Voice Search, Remote with Voice & Air Mouse also have Front Firing Speakers, etc. *35020444 firmware files are given below for free of cost download.

General Features & Specifications:

Brand: China

Board Model: *35020444

Display Format: UHD

Screen Type: LED

Features Format: Smart

OS Version: Android

Chipset: RTD2995

Processor: Dual Core

Graphic Processor: Quad-core

RAM Capacity: 1GB DDR3

Storage Memory: 4GB ROM  (32GB expandable memory)

Screen Resolution: 4K 3840×2160 (Ultra Hd)

No of HDMI Ports: 2 (1 MHL support)

No of USB Ports: 3 (2USB 2.0, 1 USB 3.0)

Wi-Fi Type: Wi-Fi

Built-In Wi-Fi: Yes

Ethernet (RJ45): Yes

Speaker Output RMS: 20W (10W*2)

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: 120 W

Firmware Type: USB Update

Firmware Name: install.img

Product: Micromax

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

*35020444 Firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

LIBERTY LE-2295 LED TV

LIBERTY LE-2295 is a 22 inches HD Ready LED TV with a resolution of 1366×768. LE-2295 is a non-smart tv. LE-2295 led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is LIBERTYal: 170 degrees and vertical: 160 degrees. LE-2295 has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. LIBERTY Software file is given below for the technician’s support. For more LIBERTY Software collection visit here.

General Specifications & Features:

Make: LIBERTY

Model: LE-2295

Display Size: 22″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

LIBERTY LE-2295 Software Free Download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.