Tag Archives: kazmi elecom

T.MT8223.5B LCD TV Board

T.MT8223.5B is a Universal LCD/LED Driver Board.

Basic Info:

Model No. T.MT8223.5B 10424

Main Chipset: MT8223

Tuner: F20WT-3DDR-E

Display Format: up to 1080

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out Jack

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

MENU 1147

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MT8223.5B Firmware Free Download :

• T-MT8223-5B 1366×768-ERISSON-19
• T-MT8223-5B 1366×768-POLAR
• T-MT8223-5B 1366×768-PRECISION-32
• T-MT8223-5B 1366×768-TECHNO-26
• T-MT8223-5B 1920×1080-SANKEY-22

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.MT8223.3B LCD TV Board

T.MT8223.3B is a Universal LCD/LED Driver Board.

Basic Info:

Model No. T.MT8223.3B

Main Chipset: MT8223

Tuner: F20WT-3DDR-E

Display Format: up to 1080

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out Jack

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

MENU 1147

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MT8223.3B Firmware Free Download :

• T-MT8223-3B 1366×768-HYUNDAI-32
• T-MT8223-3B 1366×768-ISONIC-32
• T-MT8223-3B 1366×768-SUPRA-26
• T-MT8223-3B 1366×768-TXQ-32
• T-MT8223-3B 1366×768-UTECH-32
• T-MT8223-3B 1920×1080-BESAT-42

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.MT8223.1C LCD TV Board

T.MT8223.1C is a Universal LCD/LED Driver Board.

Basic Info:

Model No. T.MT8223.1C

Main Chipset: MT8223

Tuner: F20WT-3DDR-E

Display Format: up to 1080

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out Jack

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

INPUT
MENU

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MT8223.1C Firmware All resolutions Free Download :

• T-MT8223-1C All Resolution

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

TP.V56C.PA672 LED TV Board

TP.V56C.PA672 is an analog TV board with the integration of a network driver board, power supply, and TV module. TP-V56C-PA672 with backlight power under 25W, the main promotion backlight voltage is between 25V-60V and single backlight output. TP_V56C_PA672 is mostly used for 18.5″ to 24″ screens and can support resolutions up to 1920×1080.

It has all the connectivity user interfaces like HDMI, AV, VGA, RF, and USB for multimedia playback and software upgrades as well. TP.V56C.PA672 firmware files are shared in this post for the technician’s support.

General Specifications:

Brand Name: China
Model Number:  TP.V56C.PA672
Backlight Type: LED
Wide Screen Support: Yes
Display Format: 720P (HD)

Screen Size: 18.5-24 inch
Support Resolution: 1920×1080
Main IC: TSUMV56RJUL-Z1

OSD Language: English

Factory Mode: Menu+1147

Firmware Name: VST56C_4MB_57.bin

How to Update Software:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (*. Bin file) with the TXT file to the U disk based on your screen size

Step 3: Connect the U dish and TV Mainboard Via USB Interface

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done.
If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

(Note: During Step 5, the power supply can’t be cut off *The same firmware can only be burned once time)

Boot Logo Setting:

Step 1: Put your logo into the U disk

Step 2: Connect your U disk with the mainboard

Step 3: Find your logo in Multi-media File

Step 4: Select your logo

Step 5: Press No.”6 ” on the remote control to change to fullscreen play, then press “ok” on the remote control, on the bottom of the option items, there is a ” catch”, choose it. Done

Note: The following given Software is a USB bootable and backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

TP.V56C.PA672 firmware free download:

• TP-V56C-PA672 1366x768_CRISTOR_USB
• TP-V56C-PA672 1366x768_HYUNDAI_DUMP
• TP-V56C-PA672 1366x768_SONY_DUMP
• TP-V56C-PA672 1920x1080_SAMSUNG_DUMP

ZP.VST.V56RU.PB819 LED TV Board

ZP.VST.V56RU.PB819 is a universal LED TV Board with a Full HD supported resolution of 1920×1080. It is a combo board means three in one board, a power supply module, an ATV module, and a Backlight driver module are built into this single piece of PCB. It has all the connectivity interfaces as per user requirements like HDMI, VGA, AV, RF, and USB for multimedia playback and for software loading as well. ZP.VST.V56RU.PB819 firmware files are shared in this post for the technician’s support.

Basic Info:

Model No. ZP.VST.V56RU.PB819 (Combo Board)

Main Chipset: TSUMV56RUU-Z1

LED Backlight: 38V to 70V 25W

Display Format: up to 1920×1080

Panel Supported: 32″ t0 42″ Screens

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC 220V

Maximum Current: 3000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Factory Service Mode:

Menu+1147

Note: The following given Software is a USB bootable and backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

ZP.VST.V56RU.PB819 Firmware files Free Download:

• ZP-VST.V56RU.PB819 1366x768_MIRROR
• ZP-VST.V56RU.PB819 1366x768_NORMAL
• ZP-VST.V56RU.PB819 1920x1080_MIRROR
• ZP-VST.V56RU.PB819 1920x1080_NORMAL
• ZP-VST.V56RU.PB819_Backup_Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

HK-T.SP9202V02 LED TV BOARD

HK-T.SP9202V02 is a simple ATV&DTV (DVB-T, DVB-C) Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but TV Card is built into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.HK-T.SP9202V02 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: HK-T.SP9202V02

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: 4 Mb

Sound Chip: R2A15122FP

Tuner IC: DVB-T, DVB-C

Screen supported: 15-42 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note:  The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

HK-T.SP9202V02 firmware for free download:

• HK.T.SP9202V02 1366x768_ST
• HK.T.SP9202V02 1366x768_SUNSTECH
• HK.T.SP9202V02 1920x1080_SNOWA

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ZP.VST.V56RU.PB816 LED TV Board

ZP.VST.V56RU.PB816 is a universal LED TV Board with a Full HD supported resolution of 1920×1080. It is a combo board means three in one board, a power supply module, an ATV module, and a Backlight driver module are built into this single piece of PCB. It has all the connectivity interfaces as per user requirements like HDMI, VGA, AV, RF, and USB for multimedia playback and for software loading as well. ZP.VST.V56RU.PB816 firmware files are shared in this post for the technician’s support.

Basic Info:

Model No. ZP.VST.V56RU.PB816 (Combo Board)

Main Chipset: TSUMV56

LED Backlight: 38V to 70V 25W

Display Format: up to 1920×1080

Panel Supported: 32″ t0 39″ Screens

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC 220V

Maximum Current: 3000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Factory Service Mode:

Menu+1147

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

ZP.VST.V56RU.PB816 Firmware files Free Download:

• ZP-VST-V56RU-PB816_1366x768_Samsung_Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

B.SPC82B LCD TV Board

B.SPC82B is a universal LCD driver Board that has HD resolution Supported up to 1366×768. B.SPC81B is a non-combo board which means the main power supply and LCD backlight driver board are required separately while the ATV module and sound card are built in. It can support 15-inch to 24-inch LCD screen panels. The firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: China Universal

Model: B.SPC81B-1 9245, B.SPC81B-1 1132

Main Chip: Sunplus SPV7050P, CT216T

TV System: PAL\SECAM\NTSC PLAYBACK

Product: LCD TV

Input Voltage: 12V DC

MAX Backlight Watt: NA

Backlight Current: NA

Resolution: up to 1366×768

Flash size: 1 MB

EEPROM: 25Q16,25T80, 24C16

AUDIO: TDA1517P

Tuner: CDT-SFT338-40

Service Menu:

Source

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

B.SPC82B firmware for free download:

• B-SPC82B 9072 ALIOS-19
• B-SPC82B 9072 HERACLES-19
• B-SPC82B 9072 SUPRATECH 19
• B-SPC82B 9072 VD TECH-14
• B-SPC82B-1 9262 VD TECH-24

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ZP.VST.V56RU.P671 Universal Board

Basic Info:

Model No. ZP.VST.V56RU.P671 (Combo Board)

Main Chipset: TSUMV56

LED Backlight: 18V to 70V 220mA to 300mA

Display Format: up to 1920×1080

Panel Supported: 15″ t0 29″ Screens

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC 220V

Maximum Current: 3000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Factory Service Mode:

Menu+1147

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

ZP.VST.V56RU.P671 Firmware files Free Download:

• ZP-VST-V56RU-P671_1366x768_Dump
• ZP-VST-V56RU-P671_1920x1080_Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.MS18VG.72B LED TV Board

T.MS18VG.72B is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 24-inch to 42-Inches LED panels which have a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software upgrades as well. T_MS18VG_72B has multiple HDMI ports support 1.4 and its HDCP support 1.1. T.MS18VG.72B is compatible with Non-HD and FHD LCD/LED panel screens. T.MS18VG.72B 12023 is widescreen-supported and also has a multi-language option. T.MS18VG.72B has its special feature of  AV.T.MS18VG.72B software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: T-MS18VG-72B 12023

Main Chipset: TSUMV59

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Service Menu: Menu 1147

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MS18VG.72B firmware for free download:

• T-MS18VG-72B 1366x768_BEUSAT_DUMP
• T-MS18VG-72B 1366x768_SUPRA_DUMP
• T-MS18VG-72B 1920x1080_SANYO_DUMP
• T-MS18VG-72B 1920x1080_SUPRA_DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.