Tag Archives: kazmi elecom

MS35535-ZC01-01 LED TV Board

MS35535-ZC01-01 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 32-inch to 42-Inches LED panels which have a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. TUSMV59.ZC01-01 has multiple HDMI ports that support 1.4 and its HDCP supports 1.1.

MS35535_ZC01_01 is compatible with Non-HD and FHD LCD/LED panel screens. MS35535-ZC01-01 is widescreen-supported and also has a multi-language option. MS35535-ZC01-01 has its special feature of Dual AV. MS35535-ZC01-01 software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: MS35535-ZC01-01

Main Chipset: TSUMV59

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

MS35535-ZC01-01 Firmware Collection Free Download:

• MS35535.ZC01.01 1366×768 ORIENT
• MS35535.ZC01.01 1920×1080 HAIER
• MS35535.ZC01.01 1920×1080 ORIENT

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

TSUX9V5.0 LCD Driver Board

TSUX9V5.0 is a multi-purpose LCD controller, that is suitable Asia market. It is designed to support a FULL HD LCD panel. TSUX9 V5.0 can support PC-RGB, HDMI/S-Video(Option), AV/YPBPR(Option), USB, VGA, and TV signal input. It can also support Earphone output.

Basic Info:

Model No. TSUX9V5.0

Main Chipset: TSUMV29/TSUMV39

Trademark: TOP-TECH

Display Format: up to 1920×1080

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program to the U disk based on your screen size.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu+2580

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

TSUX9V5.0 Firmware All resolutions Free Download Here :

• TSUX9-V5.0 V29-1024×768
• TSUX9-V5.0 V29-1280×800
• TSUX9-V5.0 V29-1280×1024
• TSUX9-V5.0 V29-1440×900
• TSUX9-V5.0 V29-1600×900
• TSUX9-V5.0 V29-1680×1050
• TSUX9-V5.0 V29-1920×1080
• TSUX9-V5.0 V29-V39-Specifications
• TSUX9-V5.0 V29-All-Resolutions

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

TP.MS3663.PB771 LED TV Board

TP.MS3663.PB771 is a combo HD&FHD DVB LED TV non-smart Board. It has a supported FHD resolution of 1920×1080 and a Refresh Rate is 50/60 hertz with a smooth motion rate of 200 SMR. It has multiple HDMI ports to connect a set-top box, Blu-Ray players, and gaming console, and also has more than one USB port to connect hard drives and other USB devices and play multimedia as well. It has a Dolby Sound system that Supports 16 Watts sound output and HDR Display viewing. TP-MS3663-PB771 can support multiple LCD/LED panels. TP_MS3663_PB771 firmware files are given below for free of cost download to support technicians.

General Features and Specifications:

Brand/Mark: China Universal

Model: TP.MS3663S.PB771 MS366BP1

Main Chipset: MSD3663

Product: LED TV

Resolution: 1920×1080

Panel: 24 to 32 Inch

Backlight: 35-57V 25W

HDMI Ports: 2

Component: Yes

Tuner: 1

USB Ports: 1

VGA Port: No

Scart: No

DTS Studio Sound™ Yes

Analog Audio Out AV Out

Digital Audio Out (SPDIF) Yes

SPI Flash: 8MB

Service Code: 8899

Firmware Type: USB Boot, Backup Dump

Firmware Name: MSD3663

Factory Service Mode:

8899

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

TP.MS3663.PB771 Firmware All resolutions Free Download:

• TP-MS3663-PB771 TCL-24
• TP-MS3663-PB771 TCL-25
• TP-MS3663-PB771 TCL-29
• TP-MS3663-PB771 TCL-32

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.PT363B 10212 LCD TV Board

T.PT363B 10212 is a small Universal LCD TV Mainboard Advan Votre GZ-ROWAR. PT363B-LVDS is a universal TV 4-in-1 board. T.PT363B adopts Taiwan’s NT68625 solution, which can be equipped with a 1680X1050 LVDS interface screen. It has complete programs and stable performance. It supports screens less than 26 inches, LCD, and LVDS.

Basic Info:

Model No. T.PT363B 10212

Main Chipset: NOVATEK NT68625MFG128

Trademark: Rowar

Display Format: up to 1920×1200

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: S-Video, VGA, AV, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (4 ohm)

Panel Voltage: +3.3V/+5V/+12V/ +18V DC

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC 12V+/-0.6V, 12V+5V, 24V

Maximum Current: 2000mA (Without Panel)

Standby Power: <1W (for motherboard only)

Maximum Current for USB: 500mA

Factory Service Mode:

Menu+

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.PT363B 10212 Firmware All resolutions Free Download:

• T-PT363B 10212 1024×768
• T-PT363B 10212 1280×800
• T-PT363B 10212 1280×1024
• T-PT363B 10212 1366×768
• T-PT363B 10212 1400×1050
• T-PT363B 10212 1440×900
• T-PT363B 10212 1600×900
• T-PT363B 10212 1600×1200
• T-PT363B 10212 1680×1050
• T-PT363B 10212 1920×1080
• T-PT363B 10212 1920×1200
• T-PT363B 10212 DIGITAL-19
• T-PT363B 10212 DIGITAL-22
• T-PT363B 10212 ALL RESOLUTIONS

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

HDVX9-AS V3.0 LED TV Board

HDVX9-AS V3.0 is a universal jumper LCD LED TV Control driver board. It has all the resolution software built into it. Panel power supply and panel resolution can be selected by a jumper setting. So, no need to install separate firmware for a change of resolution. Just select Panel and select Jumper as per the required resolution.

Basic Info:

Model No. HDVX9-AS-V3.0

Main Chipset: TSUMVV59XC-Z1

Display Format: Max 1920×1080@60Hz

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 2 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for motherboard only)

Maximum Current for USB: 500mA

Service Code: Menu+8896

Factory Service Mode:

1 Press Menu, then the LCD will have the menu on the screen,
2 Press the number keys 8,8,9,6, a menu appears on the screen,
3 Select SYSTEM SETTING and enter,
4 Select Panel Setting, tone 1,2,3,4 .. . After the screen is ok, press ESC, Done!

Note: If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

HDVX9-AS V3.0 Firmware Free Download :

• HDVX9-AS V3.0 Multi-Logo&Resolution

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.MSD306.32A LED TV Board

T.MSD306.32A is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.T.MSD306.32A-11202 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: T.MSD306.32A-11202

Main Chip: MSD306

Product: LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:  TDA18273

Screen supported: 32-40 inches

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Type: Backup Dump & USB

Service Code:

Menu 1147

Note: The following given Software is a backup Dump and USB bootable and the dump can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MSD306.32A firmware for free download:

• T-MSD306-32A 11202 ELEKTA-40
• T-MSD306-32A 11202 GALAXY-40
• T-MSD306-32A 11202 IRIS-USB-40
• T-MSD306-32A 11202 STREAM-32
• T-MSD306-32A 11202 SUPRA-39

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

HDVX9-AS V4.1 LED TV Board

HDVX9-AS V4.1 is a universal jumper LCD LED TV Control driver board. It has all the resolution software built into it. Panel power supply and panel resolution can be selected by a jumper setting. So, no need to install separate firmware for a change of resolution. Just select Panel and select Jumper as per the required resolution.

Basic Info:

Model No. HDVX9-AS-V4.1

Main Chipset: TSUMVV29LU/TSUMVV59XU-Z1

Display Format: Max 1920×1080@60Hz

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 2 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for motherboard only)

Maximum Current for USB: 500mA

Service Code: Menu+8896

Factory Service Mode:

1 Press Menu, then the LCD will have the menu on the screen,
2 Press the number keys 8,8,9,6, a menu appears on the screen,
3 Select SYSTEM SETTING and enter,
4 Select Panel Setting, tone 1,2,3,4 .. . After the screen is ok, press ESC, Done!

Note: If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

HDVX9-AS V4.1 Firmware Free Download :

• HDVX9-AS V4.1 Multi-Resolution

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.MSD309.2B LED TV Board

T.MSD309.2B is a universal LCD/LED Board that has Full HD resolution Supported up to 1920×1080. T-MSD309.2B is a combo board which means the main power supply, ATV board, and LED backlight driver board is a built-in single PCB. It has all the connectivity ports as per user requirements as HDMI, AV, RF, VGA, and SCART. The firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: China Universal

Model: T.MSD309.2B 10245, 11314

Main Chip: MSD308, MSD309

TV System: PAL\SECAM\NTSC PLAYBACK

Product: LED TV

Input Voltage: 12V DC

Backlight Volt:

MAX Backlight Watt: 65w

Backlight Current:

Resolution: up to 1920×1080

Flash size: 4 MB

AUDIO: 1517

Tuner: DT68CT-2-E

Service Menu:

Source

Note: 

The following Software is a backup dump and can be loaded by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MSD309.2B Firmware Free Download :

• T-MSD309-2B 10245 I-JOY-19
• T-MSD309-2B 10245 MITSAI-22
• T-MSD309-2B 11314 VITYAZ-19

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

HDVX9-AS V4.2 LED TV Board

HDVX9-AS V4.2 is a universal jumper LCD LED TV Control driver board. It has all the resolution software built into it. Panel power supply and panel resolution can be selected by a jumper setting. So, no need to install separate firmware for a change of resolution.

Basic Info:

Model No. HDVX9-AS-V4.2

Main Chipset: TSUMVV59XU-Z1

Display Format: Max 1920×1080@60Hz

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 2 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for motherboard only)

Maximum Current for USB: 500mA

Service Code: Menu+8896

Factory Service Mode:

1 Press Menu, then the LCD will have the menu on the screen,
2 Press the number keys 8,8,9,6, a menu appears on the screen,
3 Select SYSTEM SETTING and enter,
4 Select Panel Setting, tone 1,2,3,4 .. . After the screen is ok, press ESC, Done!

Note: If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

HDVX9-AS V4.2 Firmware Free Download :

• HDVX9-AS V4.2 Multi Logo & Resolution

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.MS6M181.15A LED TV Board

T.MS6M181.15A-11372 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 32-inch to 42-Inches LED panels which have a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrade as well. T.MS6M181.7A-11203 has the HDMI port support of 1.4 and its HDCP support of 1.1. T-MS6M181-15A_11372 is compatible with Non-HD and FHD LCD/LED panel screens. T_MS6M181_15A 11372 is widescreen-supported and also has a multi-language option. T.MS6M181.15A-11372 has its special feature of  AV.T.MS6M181.15A-11372 software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: T-MS6M181-15A 11372

Main Chipset: MST6M181VS-Lf-Z1

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V / +3.3V DC (Jumper Setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Tuner: F02WT-3DS-E

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: The following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MS6M181.15A Firmware Collection Free Download Here :

• T.MS6M181.15A 11372 JVC-32
• T.MS6M181.15A 11372 JVC-40

For video tutorials, visit “Kazmi Elecom” my YouTube channel.