Tag Archives: HK.T.RT2936P638 firmware

HK-T.RT2957P65 LED TV Board

HK-T.RT2957P65 is a non-smart LCD/LED TV Driver Board. It is suitable for the LVDS interface and supports more than 18-24 inches LED panels, with maximum resolution up to 1920×1080. HK_T_RT2957P65 is a three-in-one (combo) board i.e power card, backlight driver module, and TV Module are placed in a single PCB for this. HK-T-RT2957P65 has multiple input interface ports like USB, HDMI, AV, VGA port, and Scart. Its USB interface can be used for loading software as well as for playing multimedia files. HK-T.RT2957P65 supports analog TV signals, and digital TV (DVB-T/C MPEG4). HK-T.RT2957P65 firmware file is given below for the technician’s support.

General Specifications:

Model: HK-T.RT2957P65

Main Chipset: RTD2957M

Resolution Supported: 1366×768

CPU:

OS: Non-Smart

Ram:

Rom:

Audio Output Power: 2X8 W (8Ω)

Backlight: 22-28V

Backlight Power: 300-350mA

Service Code: Source 2580

Mirror Mode: No

Multi-Language: Yes

Firmware File: Install.img

Product User: Prisma Pro, Westinghouse, Supra, etc

Firmware Type: USB upgradeable Firmware

Note: The following software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download HK-T-RT2957P65 Firmware File:

Download all parts of the following firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

HK-T.RT2957P65 Firmware file for Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

HK.T.RT2969P71 FHD LED TV Driver Board

HK.T.RT2969P71 is a smart android Intelligent Network LCD/LED TV Board with an integrated digital converter. It is suitable for the LVDS interface and supports more than 32-65 inches LED panels, with maximum resolution up to 1920*1080. HK_T_RT2969P71 is a three-in-one (combo) board i.e power card, backlight driver module, and ATV board built-in into it. HK-T-RT2969P71 has multiple input interface ports like USB, HDMI, AV, VGA port, and LAN ports for wired internet connectivity. It is also built in a Wireless interface.

HK T RT2968 P630 came with Philco brand LED TVs. Its USB interface can be used for loading software as well as for playing multimedia files. HK.T.RT2969P71 support for ATV, DTV, and CATV Receiver. The HK.T.RT2969P71 firmware file is given below for the technician’s support.

General Specifications:

Model: HK.T.RT2969P71

Main Chipset: RTD2969

Resolution Supported: 1920×1080

CPU: Quad-core ARM Cortex A53

GPU: Dual-Core

OS: Android

Ram: 512Mb

Rom: 4Gb

Audio Output Power: 16 W

Energy consumption: 65W

Backlight:

Backlight Power:

Service Code:

Firmware File: Install.img

Firmware Type: USB upgradeable Firmware, HK.T.RT2969P71 program data USB

Product User: Changhong 32D3700I 32E8

Note: The following software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download HK-T-RT2969P71 Firmware Files:

Download all parts of the following firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

HK.T.RT2969P71 Firmware file for Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

HK.T.RT2851V09 UHD LED TV Board

HK.T.RT2851V09 is an Ultra HD smart android Intelligent Network DVB LCD/LED TV Board. It is suitable for the LVDS interface and supports more than 42-65 inches LED panels, with a maximum resolution of up to 3840×2160. HK_T_RT2851V09 is a non-combo board. A separate power board and backlight driver module will be required for a complete LED TV setup. HK-T-RT2851V09 has multiple input interface ports like USB, HDMI, AV, VGA port, and LAN ports for wired internet connectivity. It is also built in a Wireless interface.

HK T RT2851V09 came with some brand LED TVs like Kivi LED TV, etc. Its USB interface can be used for loading software as well as for playing multimedia files. HK.T.RT2851V09 support analog TV signals, and digital TV. The HK.T.RT2851V09 firmware file is given below for the technician’s support.

General Specifications:

Model: HK.T.RT2851V09

Main Chipset: RTD2851

Display Format: 4K

Screen Resolution: 3840×2160

CPU: Cortex-A55 Quad-Core

GPU: IMG7800

OS: Android 9

Ram: 2 Gb

Rom: 8 Gb

Audio Output Power: 2X10 W (8Ω)

Backlight: N/A

Backlight Power: N/A

Service Code: 2580

Firmware File: install_2851.img

Firmware Type: USB upgradeable Firmware

Product User: Kivi 55U730GU

Note: The following software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download HK-T-RT2851V09 Firmware files:

Download all parts of the following firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

HK.T.RT2851V09 Firmware file for Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

HK.T.RT2831P533 Smart LED TV Board

HK.T.RT2831P533 is a smart Android integrated digital converter Realtek 2831 Intelligent DVB-T2 Network LED TV Board. It is suitable for the LVDS interface. It can support 42-65 inches LED TV Screen panels with maximum resolution FHD up to 1920×1080. HK_T_RT2831P533 is a Combo three-in-one motherboard. The power card module, backlight driver module, and ATV board are built on a single PCB board. Multi-Input interfaces for user convenience such as dual HDMI input, dual USB, VGA port for PC and Laptop connectivity, AV, and LAN port for wired internet connectivity. It is also built in a Wireless interface.

HK T RT2831P533 installed with Kivi and other brands of LED TVs. Its dual USB interfaces are convenient for users to play multimedia files or upgrade software. ATV, DTV, and CATV Reception are supported by HK.T.RT2831P533. The HK.T.RT2831P533 USB bootable Software file is shared below for the support of technicians.

General Specifications:

Model: HK.T.RT2831P533

Main Chipset: RTD2831

Resolution Supported: 1920×1080

CPU: ARM Cortex A53 Quad-Core

CPU Frequency: 1.3 GHz

GPU: Dual-Core

OS: Android 7.0

Ram: 1 Gb

Rom: 8 Gb

Audio Output Power: 10 W (5Wx2)

Energy consumption: 35W

Backlight:

Backlight Power:

Service Code:

Firmware File: Install.img

Firmware Type: USB upgradeable Firmware

Product User: KIVI 24HR52GR

Caution: 

All the pictures and specification details related to HK.T.RT2831P533 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home. If the LED TV is slow then reset it to Factory Default only.

Pros:

There are many advantages to installing the given HK.T.RT2831P533 USB software or eMMC backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given USB software or EMMC backup file
• Remote and Logo may change at your own choice to satisfy the customer
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given HK.T.RT2831P533 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Remote Control may not work and the Logo may change by writing the given software
• Panel screen parameters may be changed

HK.T.RT2831P533 Android Version Upgrade:

Please note that the installed version in this board is the final version and the Android version is not updateable. So, no need to upgrade the software if the board is working normally. Only if, the default software malfunctions due to some bugs will the manufacturer provide the software update. Otherwise, no version update is issued.

HK.T.RT2831P533 EMMC Backup:

This board has a 8GB eMMC chip. you can read the EMMC backup by Pendrive but for writing a backup of EMMC you should jtag the mainboard HK.T.RT2831P533 and write by a programming tool. Be careful while writing emmc backup file, if the board is on standby light due to wrong software or incomplete installation then you can do it, otherwise, it is on standby or red light due to hardware fault. So, first trace the fault. In this case, no need to write emmc backup.

HK.T.RT2831P533 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications, the newest Android version, and the latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable and EMC backup file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download HK-T-RT2831P533 Firmware File:

Download all parts of the following firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

HK.T.RT2831P533 Firmware file for Free Download:

HK.T.RT2968v07 FHD LED TV Board

HK.T.RT2968v07 is a smart android Intelligent Network LCD/LED TV Board with an integrated digital converter. It is suitable for the LVDS interface and supports more than 42-65 inches LED panels, with maximum resolution up to 1920*1080. HK_T_RT2968v07 is a three-in-one (combo) board i.e power card, backlight driver module, and ATV board builtin in it. HK-T-RT2968v07 has multiple input interface ports like USB, HDMI, AV, VGA port, and LAN ports for wired internet connectivity. It is also built in a Wireless interface.

HK T RT2968v07 came with Philco brand LED TVs. Its USB interface can be used for loading software as well as for playing multimedia files. HK.T.RT2968v07 support for ATV, DTV, and CATV Receiver. The HK.T.RT2968v07 firmware file is given below for the technician’s support.

General Specifications:

Model: HK.T.RT2968v07

Main Chipset: RTD29

Resolution Supported: 1920×1080

CPU: Quad-core ARM Cortex A53

GPU: Dual-Core

OS: Android

Ram: Gb

Rom: Gb

Audio Output Power: 20 W

Energy consumption: 92W

Backlight:

Backlight Power:

Service Code:

Firmware File: Install.img

Firmware Type: USB upgradeable Firmware

Product User: Philco

Note: The following software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

HK.T.RT2968v07 Firmware file for Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

HK.T.RT2936P638 Firmware

HK.T.RT2936P638 is an LCD/LED TV Board. It is suitable for the LVDS interface and supports more than 32-46 inches LED panels, with maximum resolution up to 1920*1080. HK_T_RT2936P638 is a three-in-one (combo) board i.e power card, backlight driver module, and ATV board is builtin into it. HK-T-RT2936P638 has multiple input interface ports like USB, HDMI, AV, VGA port, and VGA port for computer connectivity. The Wireless Module interface can also be connected to it.

HK T RT2936P638 came with some brand LED TVs like Treeview LED TV, Elenberg LED TV, Haier LED TV, etc. Its USB interface can be used for loading software as well as for playing multimedia files. HK.T.RT2936P638 support analog TV signals, digital TV. HK.T.RT2936P638 firmware file is given below for the technician’s support.

General Specifications:

Model: HK.T.RT2936P638

Main Chipset: RTD2936HBZ

Resolution Supported: 1920×1080

Flash Memory: 25Q64, 25Q128

Audio Output Power: 2X5 W (8Ω)

Backlight: 30 V to 94 V, 600mA

Backlight Power: 45 W

Tuner: DVB-T/T2

WIFI/Miracost: Optional

Service Code: Menu 8896

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

Here is below HK.T.RT2936P638 Firmware file for Free Download:

HK-T.RT2968P61 Intelligent Network TV Card

HK-T.RT2968P61 is a smart android Intelligent Network LCD/LED TV Board. It is suitable for the LVDS interface and supports more than 32-46 inches LED panels, with maximum resolution up to 1920*1080. HK_T_RT2986P61 is a three-in-one (combo) board i.e power card, backlight driver module, and ATV board built-in into it. HK-T-RT2986P61 has multiple input interface ports like USB, HDMI, AV, VGA port, and LAN ports for wired internet connectivity. It is also built in a Wireless interface.

HK T RT2986P61 came with some brand LED TVs like FUJICOM FJ-50ST SMART TV,  Skyworth 32k3, Haier H32E07, Huike HKC K403, etc. Its USB interface can be used for loading software as well as for playing multimedia files. HK-T.RT2968P61 support analog TV signals, and digital TV (DTMB’s new national standard). HK-T.RT2968P61 firmware file is given below for the technician’s support.

General Specifications:

Model: HK-T.RT2986P61

Main Chipset: VX628B / RT2984D

Resolution Supported: 1920×1080

CPU: Quad-core ARM core processor

OS: Android 4.4

Ram: 512Mb

Rom: 4Gb

Audio Output Power: 2X8 W (8Ω)

Backlight: 30 V to 94 V, 600mA

Backlight Power: 45 W

Service Code: Menu 1147

Mirror Mode: No

Multi-Language: Yes

Firmware File: Install.img

Firmware Type: USB upgradeable Firmware, HK-T.RT2968P61 program data USB

Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

HK-T.RT2986P61 Firmware file for Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.