GT.V56.A01 Universal Board
GT.V56.A01 is a universal LCD/LED TV Controller board that is designed for Asian countries with jumper cap setting for all panel VCC. GT_V56_A01 supports a high screen resolution of 1920×1080 panels. GT-V56-A01 is compatible with 15-32″ LVDS screens but does not support all panels.
Basic Info:
Model No. GT.V56.A01
Main Chipset: TSUMV56
Audio: CD1517CP
Support Language: Multi
Display Format: 1080p
Max Resolution : up to 1920×1080
Aspect Ratio: 4:3, 16:9 & 16:10
General Specifications:
TV System: PAL/SECAM/NTSC
Panel Interface: Single channel or Dual channel LVDS
Mirror Enable: Yes
Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power
Multi-Language OSD: Yes
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out
Audio O/P Power: 2 x 3 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: DC +12 Volt 4Amp
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for motherboard only)
Maximum Current for USB: 500mA
How to Upgrade Firmware:
- Copy the Required Firmware/software (“GT_V56_RUUL.bin”) in FAT32 USB Disk
- Plug in the U disk into the Mainboard USB port of LCD/LED TV
- Switch ON the power and Wait even IR indicator led flash rapidly
- Done. Unplug the Udisk (It will take max 1 min to upgrade firmware)
- It continues to keeps flashing and never stop. This is normal, just wait about 1 minute, this means that the update is complete. Then turn off and turn on also remove the u-disk
Factory Service Mode:
Input 2580, Menu 1147
Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here
GT.V56.A01 Firmware Free Download Here :
