ECHOLINK EL-888 ULTRA Satellite Receiver
ECHOLINK EL-888 ULTRA dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of ECHOLINK EL-888 ULTRA receiver. The main processor/Microcontroller retrieves the information from memory ic when it is power on to know how to work/boot. If the Flash IC/Memory IC of the ECHOLINK EL-888 ULTRA receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver ECHOLINK EL-888 ULTRA does not turn on. In this situation, we need to reprogram the flash ic of the ECHOLINK EL-888 ULTRA receiver with the matched hardware dump/flash file to get the receiver in normal condition. A dump file of ECHOLINKEL-888 ULTRAis shared for the technician/user support.
Information and Specifications of ECHOLINK EL-888 ULTRA:
Manufacturer: ECHOLINK
Box Model: EL-888 ULTRA
Main Board: NA
Main Controller or Chipset: NA
Box Type: FTA
Flash Type: SPI SOP8/SOIC8
Flash Memory: GD25Q16B
Flash Size: 2 Mb
Software Type: Backup Dump
Software Size: 1.04 Mb
Download File Format: ZIP
Download Type: Free
Note:
Given ECHOLINK EL-888 ULTRA receiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. Kazmi Elecom Team is not responsible for any type of damage/loss because of uploading/downloading the software.
Here is the download link of the ECHOLINK EL-888 ULTRA dump file free download.
