DPD-TV956A-V1.1 Universal Board
DPD-TV956A-V1.1 is a small universal LCD/LED TV Driver Controller Board with DC input power and Jumper cap setting for Panel VCC.
Basic Info:
Model No. DPD-TV956A-V1.1
Main Chipset: TSUMV59XU-Z1
Trademark:
Display Format: up to 1920×1200
Aspect Ratio: 4:3, 16:9 & 16:10
General Specifications:
TV System: PAL/SECAM/NTSC
Panel Interface: Single-channel or Dual-channel LVDS
Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power
Multi-Language OSD: Yes
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out
Audio O/P Power: 2 x 3 Watt (8 ohms)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for the motherboard only)
Maximum Current for USB: 500mA
How to Upgrade Firmware:
- Copy the Required Firmware/software into the FAT32 USB Disk
- Plugin the U disk into the Mainboard USB port of the LCD/LED TV
- Switch ON the power and Wait even IR indicator led flashing in the speed
- Done. Unplug the U-disk (It will take a max of 1 min to upgrade firmware)
- It continues to flash and never stops. This is normal, just wait about 1 minute, this means that the update is complete. Then turn off and turn off the u-disk
Factory Service Mode:
Menu+1147
Note:
If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download your required software and then extract it you will get the folder. Now copy the files to USB or load them with Programmer. For More Detail about the download process, watch the video Click Here
DPD-TV956A-V1.1 Firmware Files Free Download:
For video tutorials, visit “Kazmi Elecom” my youtube channel.
