Tag Archives: Digital Video Recorder

HIKVISION DS-7216HGHI-SH DS-80195 REV1.2 DVR Backup Free Download

HIKVISION DS-7216HGHI-SH DS-80195 REV1.2 DVR

HIKVISION DS-7216HGHI-SH DS-80195 REV1.2 DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

HIKVISION DS-7216HGHI-SH DS-80195 REV1.2 DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Hikvision Ds-7216Hghi-Sh Ds-80195 Rev1.2 Dvr

Technical Specifications of HIKVISION DS-7216HGHI-SH DS-80195 REV1.2 DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

Kazmi-Elecom

HIKVISION DS-7216HGHI-SH DS-80195 REV1.2 DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

NVR4216N NVR Backup Free Download

NVR4216N NVR

NVR4216N NVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

NVR4216N NVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Nvr4216N Nvr

Technical Specifications of NVR4216N NVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

Kazmi-Elecom

NVR4216N NVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

DIGI SEC DS-5808RM-AB DVR Backup Free Download

DIGI SEC DS-5808RM-AB DVR

DIGI SEC DS-5808RM-AB DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

DIGI SEC DS-5808RM-AB DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Digi Sec Ds-5808Rm-Ab Dvr

Technical Specifications of DIGI SEC DS-5808RM-AB DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

Kazmi-Elecom

DIGI SEC DS-5808RM-AB DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

DIGI SEC DS-5404RM-AB DVR Backup Free Download

DIGI SEC DS-5404RM-AB DVR

DIGI SEC DS-5404RM-AB DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

DIGI SEC DS-5404RM-AB DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Digi Sec Ds-5404Rm-Ab Dvr

Technical Specifications of DIGI SEC DS-5404RM-AB DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

Kazmi-Elecom

DIGI SEC DS-5404RM-AB DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

DH-3308 AT-NH-B3520D-8 DVR Backup Free Download

DH-3308 AT-NH-B3520D-8 DVR

DH-3308 AT-NH-B3520D-8 DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

DH-3308 AT-NH-B3520D-8 DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Dh-3308 At-Nh-B3520D-8 Dvr
oppo_0

Technical Specifications of DH-3308 AT-NH-B3520D-8 DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

Kazmi-Elecom

DH-3308 AT-NH-B3520D-8 DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

DAHUA DH-XVR1A04 DVR Backup Free Download

DAHUA DH-XVR1A04 DVR

DAHUA DH-XVR1A04 DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red light. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

DAHUA DH-XVR1A04 DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Dahua Dh-Xvr1A04 Dvr

Technical Specifications of DAHUA DH-XVR1A04 DVR:

Manufacturer/Make/Brand Name: DAHUA

DVR/NVR Model: DH-XVR1A04

Chassis/Main Board: D181258-252

Chipset/System IC/Processor: Hisilicon

Channel/Ports: 4-CH

Software Version:

SPI Flash Memory: 16 MB

Interface: VGA, HDMI, RCA, RJ45, BNC

Power Supply Input: 12C-4Amp

Power Consumption: 15w without HDD

Caution: 

All the pictures and specification details related to the DAHUA DH-XVR1A04 DVR in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without installing the Backup File. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

DAHUA DH-XVR1A04 DVR Version Upgrade:

Please note that the installed version in this DVR is the final version that will operate normally. Mostly the manufacturer releases updates to fix the bugs in the previous version or adds some new features and applications for customer satisfaction and smooth working of the DVRs. Please note that the following given DAHUA DH-XVR1A04 DVR program backup file is not for upgrade purposes.

Pros:

There are some advantages to installing the given DAHUA DH-XVR1A04 DVR backup dump file. A few benefits are described below:

  • The dead DVR can be recovered and operational by loading the given Backup Dump File
  • Money saving instead of changing the DVR mainboard
  • Time-saving instead of arranging a new DVR board
  • The customer satisfaction to do an urgent job by installing the backup file

Dahua Dh Xvr1A04 Program Jpg

Cons:

There may be some disadvantages to writing the given DAHUA DH-XVR1A04 DVR backup dump file. A few drawbacks are described below:

  • The working DVR may go to the standby position or dead
  • The DVR manufacturer logo and some features may change
  • Video channels may be out of order
  • No display for some cameras

Note: The following DAHUA DH-XVR1A04 DVR program is a backup file that can be written by a programming tool or loaded by a loader tool. First, read the original Flash file and save it. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software.  If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

Kazmi-Elecom

DAHUA DH-XVR1A04 DVR Software Backup File Free Download.

DAHUA DHI-XVR5104HS-S2 DVR Backup Free Download

DAHUA DHI-XVR5104HS-S2 DVR

DAHUA DHI-XVR5104HS-S2 DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

DAHUA DHI-XVR5104HS-S2 DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Dahua Dhi-Xvr5104Hs-S2 Dvr

Technical Specifications of DAHUA DHI-XVR5104HS-S2 DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

Kazmi-Elecom

DAHUA DHI-XVR5104HS-S2 DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

DAHUA DHI-XVR4108HS-S2 D171841_168 DVR Backup Free Download

DAHUA DHI-XVR4108HS-S2 D171841_168 DVR

DAHUA DHI- XVR4108HS- S2 D171841_168 DVR backup train is posted then in this post for the support of technicians to recover or repair DVR/ NVR. The videotape archivist is stuck on the incipiency or totem screen and doesn’t fully bobble due to software conking or memoir problems. In some other cases, the DVR/ NVR may not power on or have no display but only on the buttress/ red light. In similar cases, there may be a software issue or a tackle issue. So, first of all, if the videotape archivist is on buttress/ red light only also check the core voltage and ensure that all measures are perfect and the main system IC is also normal also load the backup train.

DAHUA DHI- XVR4108HS- S2 D171841_168 DVR backup is saved from working DVR/ NVR. Be careful when writing provisory lines. Make sure that the main board or lattice is the same as you bear and if possible corroborate the main processor. You should first keep the backup of old software and also write another. Always check the software backup size and flash memory size which will be the same in size. DVR/ NVR channel capacity may differ in some cases but the main board and processor are the same. In these cases, you can write a backup train if there’s no other option.

Dahua Dhi-Xvr4108Hs-S2 D171841_168 Dvr

Technical Specifications of DAHUA DHI-XVR4108HS-S2 D171841_168 DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Interface: VGA, HDMI, RCA, RJ45, BNC

Power Supply Input: 12C-4Amp

Power Consumption: 15w without HDD

Caution: 

All the filmland and specification details related to the DAHUA DHI- XVR4108HS- S2 D171841_168 DVR in this post are for reference only. However, it’s better to visit the nearest technician first without installing the Provisory train, If you’re a stoner and don’t have any form experience. occasionally, the fault is different grounded on the visual compliances. So, please don’t try it at home.

Note: The following DAHUA DHI- XVR4108HS- S2 D171841_168 DVR program is a provisory train that can be written by a programming tool or loaded by a haul tool. First, read the original Flash Train and save it. Kazmi Elecom Team isn’t responsible for any type of damage/ loss as a result of uploading/ downloading the firmware. First, check and corroborate the main board also install software. However, or facing any issues during firmware installation also visit and read them first, If you’re new and don’t have enough knowledge of lading/ installing software/ firmware or dump lines. read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

Kazmi-Elecom

DAHUA DHI-XVR4108HS-S2 D171841_168 DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

DAHUA DHI-XVR4108HS D162630_217 DVR Backup Free Download

DAHUA DHI-XVR4108HS D162630_217 DVR

DAHUA DHI-XVR4108HS D162630_217 DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

DAHUA DHI-XVR4108HS D162630_217 DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Dahua Dhi-Xvr4108Hs D162630_217 Dvr

Technical Specifications of DAHUA DHI-XVR4108HS D162630_217 DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

Kazmi-Elecom

DAHUA DHI-XVR4108HS D162630_217 DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

AHB7804R-MS-ZS V2.01 DVR Backup Free Download

AHB7804R-MS-ZS V2.01 DVR

AHB7804R-MS-ZS V2.01 DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

AHB7804R-MS-ZS V2.01 DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Ahb7804R-Ms-Zs V2.01 Dvr

Technical Specifications of AHB7804R-MS-ZS V2.01 DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

Kazmi-Elecom

AHB7804R-MS-ZS V2.01 DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

error: Content is protected !!