Tag Archives: Digital Video Recorder

HiLook DVR-104G-F1 DS-80237-P REV6.0 DVR

HiLook DVR-104G-F1 DS-80237-P REV6.0 DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. The video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems. In some other cases, the DVR/NVR may not power on or have no display but only on standby/red light. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

HiLook DVR-104G-F1 DS-80237-P REV6.0 DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis is the same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may differ in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of HiLook DVR-104G-F1 DS-80237-P REV6.0 DVR:

Manufacturer/Make/Brand Name: HiLook

DVR/NVR Model: DVR-104G-F1

Chassis/Main Board: DS-80237-P REV6.0

Chipset/System IC/Processor: Hi-Silicon

Channel/Ports: 4 CH

Software Version: NA

SPI Flash Memory: 16MB

Interface: VGA, HDMI, RCA, RJ45, BNC

Power Supply Input: 12C-4Amp

Power Consumption: 15w without HDD

Caution: 

All the pictures and specification details related to the HiLook DVR-104G-F1 DS-80237-P REV6.0 DVR in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without installing the Backup File. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

HiLook DVR-104G-F1 DS-80237-P REV6.0 DVR Version Upgrade:

Please note that the installed version in this DVR is the final version that will operate normally. Mostly the manufacturer releases updates to fix the bugs in the previous version or adds some new features and applications for customer satisfaction and smooth working of the DVRs. Please note that the following given HiLook DVR-104G-F1 DS-80237-P REV6.0 DVR program backup file is not for upgrade purposes.

Pros:

There are some advantages to installing the given HiLook DVR-104G-F1 DS-80237-P REV6.0 DVR backup dump file. A few benefits are described below:

• The dead DVR can be recovered and operational by loading the given Backup Dump File
• Money saving instead of changing the DVR mainboard
• Time-saving instead of arranging a new DVR board
• The customer satisfaction to do an urgent job by installing the backup file

Cons:

There may be some disadvantages to writing the given HiLook DVR-104G-F1 DS-80237-P REV6.0 DVR backup dump file. A few drawbacks are described below:

• The working DVR may go to the standby position or dead
• The DVR manufacturer logo and some features may change
• Video channels may be out of order
• No display for some cameras

Note: The following HiLook DVR-104G-F1 DS-80237-P REV6.0 DVR program is a backup file that can be written by a programming tool or loaded by a loader tool. First, read the original Flash file and save it. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

HiLook DVR-104G-F1 DS-80237-P REV6.0 DVR Software Backup File Free Download.

VERTINA VDR-401L DVR

VERTINA VDR-401L DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

VERTINA VDR-401L DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of VERTINA VDR-401L DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

VERTINA VDR-401L DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

UNIVIEW NVR201-08E NVR

UNIVIEW NVR201-08E NVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

UNIVIEW NVR201-08E NVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of UNIVIEW NVR201-08E NVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

UNIVIEW NVR201-08E NVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

TOPSVIEW NBD-MC6810-1G V1.01 NVR

TOPSVIEW NBD-MC6810-1G V1.01 NVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red light. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

TOPSVIEW NBD-MC6810-1G V1.01 NVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of TOPSVIEW NBD-MC6810-1G V1.01 NVR:

Manufacturer/Make/Brand Name: TOPSVIEW

DVR/NVR Model: NBD-MC6810-1G V1.01

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports: 8-CH 5MP

Software Version:

SPI Flash Memory: 8mb

Interface: VGA, HDMI, RJ45

Power Supply Input: 12C-4Amp

Power Consumption: 15w without HDD

Caution: 

All the pictures and specification details related to the TOPSVIEW NBD-MC6810-1G V1.01 NVR in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without installing the Backup File. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

TOPSVIEW NBD-MC6810-1G V1.01 NVR Version Upgrade:

Please note that the installed version in this NVR is the final version that will operate normally. Mostly the manufacturer releases updates to fix the bugs in the previous version or adds some new features and applications for customer satisfaction and smooth working of the DVRs. Please note that the following given TOPSVIEW NBD-MC6810-1G V1.01 NVR program backup file is not for upgrade purposes.

Pros:

There are some advantages to installing the given TOPSVIEW NBD-MC6810-1G V1.01 NVR backup dump file. A few benefits are described below:

• The dead NVR can be recovered and operational by loading the given Backup Dump File
• Money saving instead of changing the NVR mainboard
• Time-saving instead of arranging a new NVR board
• The customer satisfaction to do an urgent job by installing the backup file

Cons:

There may be some disadvantages to writing the given TOPSVIEW NBD-MC6810-1G V1.01 NVR backup dump file. A few drawbacks are described below:

• The working NVR may go to the standby position or dead
• The DVR manufacturer logo and some features may change
• Video channels may be out of order
• No display for some cameras

Note: The following TOPSVIEW NBD-MC6810-1G V1.01 NVR program is a backup file that can be written by a programming tool or loaded by a loader tool. First, read the original Flash file and save it. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

TOPSVIEW NBD-MC6810-1G V1.01 NVR Software Backup File Free Download.

TOPS VIEW TS_VCO738_NVP6114A_V1.0 DVR

TOPS VIEW TS_VCO738_NVP6114A_V1.0 DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

TOPS VIEW TS_VCO738_NVP6114A_V1.0 DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of TOPS VIEW TS_VCO738_NVP6114A_V1.0 DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

TOPS VIEW TS_VCO738_NVP6114A_V1.0 DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

SEISA H264 T8-3520D-LS V1.01 DVR

SEISA H264 T8-3520D-LS V1.01 DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

SEISA H264 T8-3520D-LS V1.01 DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of SEISA H264 T8-3520D-LS V1.01 DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

SEISA H264 T8-3520D-LS V1.01 DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

PIXELL RS-N9709A-V1 NVR DVR

PIXELL RS-N9709A-V1 NVR DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

PIXELL RS-N9709A-V1 NVR DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of PIXELL RS-N9709A-V1 NVR DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

PIXELL RS-N9709A-V1 NVR DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

7004T-LME PLUS DVR

7004T-LME PLUS DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

7004T-LME PLUS DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of 7004T-LME PLUS DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

7004T-LME PLUS DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

HIKVISION DS-7100 DS-80237 REV5.2 DVR

HIKVISION DS-7100 DS-80237 REV5.2 DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

HIKVISION DS-7100 DS-80237 REV5.2 DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of HIKVISION DS-7100 DS-80237 REV5.2 DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

HIKVISION DS-7100 DS-80237 REV5.2 DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

DAHUA DH-HCVR4108HS-S2 DVR

DAHUA DH-HCVR4108HS-S2 DVR backup file is posted here in this post for the support of technicians to recover or repair DVR/NVR. In most of the cases video recorder is stuck on the startup or logo screen and does not completely boot due to software malfunctioning or bios problems and in some other cases, DVR/NVR may not power on or have no display but only on standby/red ligh. In such cases, there may be a software issue or hardware issue. So, first of all, if the video recorder is on standby/red light only then check the core voltage and ensure that all measurements are perfect and the main system IC is also normal then load the backup file.

DAHUA DH-HCVR4108HS-S2 DVR backup is saved from working DVR/NVR. Be careful when writing backup files. Make sure that the main board or chassis are same as you require and if possible verify the main processor. You should first keep the backup of old software and then write another. Always check the software backup size and flash memory size which will be the same in size. DVR/NVR channel capacity may be different in some cases but the main board and processor are the same. In these cases, you can write a backup file if there is no other option.

Technical Specifications of DAHUA DH-HCVR4108HS-S2 DVR:

Manufacturer/Make/Brand Name:

DVR/NVR Model:

Chassis/Main Board:

Chipset/System IC/Processor:

Channel/Ports:

Software Version:

SPI Flash Memory:

Note: The following firmware is a backup file and can be written by a programming tool or can be loaded by a loader tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required DVR/NVR backup firmware/software and then extract it you will get the folder. Now copy the files to USB or load them with a programmer. For more Details about the download process watch the video Click Here

DAHUA DH-HCVR4108HS-S2 DVR Software Backup File Free Download.

For video tutorials, visit “Kazmi Elecom” my YouTube channel.