Tag Archives: china universal board software

ZP.VST.V59.P671 Universal Board

Basic Info:

Model No. ZP.VST.V59.P671 (Combo Board)

Main Chipset: TSUMV59XU-Z1

LED Backlight: 18V to 70V 220mA to 300mA

Display Format: up to 1920×1080

Panel Supported: 15″ t0 29″ Screens

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC 220V

Maximum Current: 3000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (*. Bin file) to the U disk.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keypad and IR also

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu+1147

Note: The following given firmware is USB upgradeable dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download ZP.VST.V59.P671 Firmware:

Download the following given firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

ZP.VST.V59.P671 Firmware files Free Download:

• ZP.VST.V59.P671_NOBEL_24 Inch
• ZP.VST.V59.P671_1366x768_Backup
• ZP.VST.V59.P671_1366x768_USB
• ZP.VST.V59.P671_SONY_24 Inch

TP.ATM20.PB819 Smart Cloud TV Motherboard

TP.ATM20.PB819 is an Android network driver smart LED TV board with an FHD resolution of 1920×1080. TP_ATM20_PB819 has a powerful wifi system. Smart FHD TV With Android Platform and great features to entertain Full HD Wide Screen with better to work SMART. TP ATM20 PB819 Smart Board has multiple ports of A/V, USB interface Ports, and many HDMI ports as well in addition to the VGA interface for computers. TP-ATM20-PB819 has a LAN/RJ45 Connector interface port also for the wired internet network.

TP_ATM20_PB819 is a Combo Network Triple play board that has the Digital TV tuner built-in in it. The Graphics and Sound quality of the TP ATM20 PB819 android board are very good and the Response rate is very efficient. TP-ATM20-PB819 china smart network board can support up to 42″ LED Panels. TP.ATM20.PB819 firmware file is available for the technician’s support.

General Specifications:

Brand/Mark: Main Board (Android WIFI Network Drive Smart Board)

Main Board: TP.ATM20.PB819

Main Chipset: Hi3751ARBCV3200N00

Operating System: Android 4.4

CPU: A53

GPU: Mali-450

CPU: A53

GPU: Mali-450

CPU Frequency: 1.2GHz

GPU Frequency: 432MHz

RAM: 512 Mb

ROM: 4Gb

Back Light V/C : 48W 12V/19V 30V-44V/25W 2PIN-2.0+3PIN-2.0 or 2PIN-2.0+2PIN-2.0
48W 12V/24V 45V-63V/25W
48W 12V/32V 64V-94V/25W

Resolution: up to 1920×1080

Screen Size supported: 32 to 42 Inch

Audio Output power: 2x8W

Input Voltage: 200-240V AC

Firmware: allupgrade_v320_512_refxx.bin

Firmware Type: USB Updateable Firmware, TP.ATM20.PB819 Program Data USB Upgradeable

Note: The following given Software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given Software/firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

TP.ATM20.PB819 firmware file for free download:

GT.56J.01 & GSD56JIT0 Firmware

GT.56J.01 & GSD56JIT0 is a universal LCD/LED TV Controller board that is designed for Asian countries and supports the English menu language as well. GT.56J.01 & GSD56JIT0 supports a high screen resolution of 1920×1080 panels. GT.56J.01 & GSD56JIT0 are compatible with 7-55″ LVDS screens but do not support all panels.

Basic Info:

Model No. GT.56J.01, GSD56JIT0

Main Chipset: TSUMV56

Support Language: English, Chinese, French, Vietnamese

Display Format: 720p

Max Resolution: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Mirror Enable: Yes

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt 4Amp

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/Installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the required resolution file to USB and install. for More Detail about the download, process watch the video Click Here

GT.56J.01 & GSD56JIT0 Firmware All resolutions Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV338H-D42 Firmware

CV338H-D42 Network Android Smart LED TV Board

CV338H-D42 is an android network driver board with an FHD resolution of 1920×1080. CV338H_D42 has a powerful wifi system. Smart FHD TV With Android Platform and great features to entertain Full HD Wide Screen with better to work SMART. CV338H D42 Smart Board has multiple ports of A/V, USB interface Ports, and many HDMI ports as well in addition to VGA, Scart and Earphones also. CV338H.D42 has a LAN/RJ45 Connector interface port also for the wired internet network.

CV338H-D42 is a Combo Network Triple play board that has the Digital TV tuner built-in in it. The Graphics and Sound quality of the CV338H_D42 android board are very good and the Response rate is very efficient. CV338H-D42 china smart network board can support up to 55″ screen panels. CV338H-D42 firmware is available for technician’s support.

General Specifications:

Brand/Mark: Culture View Universal Android WIFI Smart Board

Main Board: CV338H-D42

Main Chipset: MSD6A

OS: Android 4.4

CPU: Dual Core

Back Light V/C : 65v-96v 600mA

Ram: 512Mb

Rom: 4 Gb eMMC

Resolution: up to 1920×1080

Tuner: ATV&DVBT

Firmware: CtvUpgrade.bin

Firmware Type: USB Updateable Firmware

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

Service Code:

Menu+1147

How to Load Software:

1. Transfer the required resolution file into USB Disk
2. Plugin the USB Disk into Main Board
3. Keep Pressing the Standby/Power button and Power on the board
4. Wait until the red light starts flashing
5. Note: USB file must be the name of “CtvUpgrade.bin”

Here are below some CV338H-D42 firmware for free download:

Firmware:

T201709123A-CNC-CoocaaOs-338H-D42-LC390TU1A-550MA-20170908185439, eMMc backup For PANDA LC390TU1A, 1366 × 768

T201709123A-CNC-CoocaaOs-338H-D42-LC390TU1A-550MA-20170908185439, Firmware For PANDA LC390TU1A, 1366 × 768

T201708078A-CNC-CoocaaOs-338H-D42-HV320WHB-N55-600MA-20170828150556

TP.MS638.PC821 4K Three-In-One Smart Motherboard

TP.MS638.PC821 is a three-in-one Intelligent 4K smart network drive board with a resolution of 3840×2160. It is dedicated to 60 and 120 Hz screens. TP-MS638-PC821 has a powerful wifi system. Smart UHD TV With Android Platform and great features to entertain ultra HD Wide Screen with better to work SMART. TP_MS638_PC821 is a 4K original quad-core Android smart Mainboard.

TP MS638 PC821 has multiple Input interface ports like Dual USB, HDMI, AV, Earphone out, PC VGA interface, Card reader, and wifi builtin with an RJ45 ethernet port for wired internet connection and smooth connectivity.

General Specifications:

Brand/Mark: Leroy universal LCD Network board

Main Board: TP.MS638.PC821

Main Chipset: MSD6A638JSM-003J

PANEL Type: TFT LCD

Panel Size: 42″-65″

Interface: Single/Dual LVDS, V-by-one(4K2K)

Max Resolution: 1920*1080,3840*2160(4K2K)

Panel Power: 12V

Function: ATV(PAL/NTSC/SECAM)/DTV(DTMB)

Aspect Ratio: 16:09

Audio Output Power: 2x10W(8Ω)

OS: Android 4.4

CPU: A53*2

CPU Frequency: 1.2 GHz

GPU: Mali720MP2*2

GPU Frequency: 450 MHz

Ram: 1Gb

Rom: 4Gb/8Gb eMMC

Backlight: 108W 450mA

Power Input: 100-280V AC

Service Code: Menu+1147

Firmware Name: allupgrade_msd638_8G_ref45.bin, allupgrade_msd638_4G.bin

Firmware Type: USB Upgradeable

Note: The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

TP.MS638.PC821 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

Firmware:

allupgrade_msd638_4G_TP.MS638.PC821_UHD.rar

CS143567_RX_MS638_PC821B_A20_8G_CH_4K_2K_DOUBLE_PO RT_IR_XYR08_8G_REF45_14cadab1_20160117_133447

CS143565_RX_MS638_PC821B_A20_8G_CH_4K_2K_IR_XYR08_ 8G_REF45_24419ff1_20160117_122320

CS153060_JAV_TP_MS638_PC821_HV490QUB_B05_53A_LOGO_JAV_8G_REF45_8ee25629_20160803_152718

CV338H-T42 4K LED Board

CV338H-T42 is an Intelligent 4K network driver board with a UHD resolution of 3840×2160. It is dedicated to 50, 60, and 120 Hz screens. CV338H_T42 has a powerful wifi system. Smart UHD TV With Android Platform and great features to entertain ultra HD Wide Screen with better to work SMART. CV338H T42 4K Smart Board has multiple ports of A/V, USB interface Ports, and many HDMI ports as well in addition to VGA and Headphones also.

CV338H-T42 has a LAN/RJ45 Connector interface port also for the wired internet network. CV338H-T42 is a Combo Network Triple play board that has the Digital TV tuner built-in in it. The Graphics and Sound quality of the CV338H-T42 android board are very good and the Response rate is very efficient. CV338H-T42 china smart network board can support up to 65″ screen panels.

General Specifications:

Model Name: CV338H-T42  (4k Smart UHD Android Board)

Main Chipset: CV338H

Resolution: 3840*2160

Aspect Ratio: 16:09

OS Version: Android 4.4

CPU: Dual Core

Ram: 1GB

Rom: 4GB/8GB

Audio Power Output: 16w (8×2)

System: PAL/SECAM

WIFI Antenna: Yes (Built-in)

Mirror: Yes

DLNA/Miracast: Yes

PC Compatible: Yes (via HDMI/VGA)

TV Tuner Input: 1

Digital Tuner: DVB-C, DVB-T, DVB-T2

HDMI: 3 ( HDMI1.4 *1, HDMI2.0 *2 )

AV IN: Mini AV

USB Ports: USB2.0 *2

Power Rating: 100V~240V 50Hz/60Hz

Power Consumption: 140Watt

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

How to Install:

1. Unzip/Extract the firmware
2. Copy the CtvUpgrade.bin file to the USB disk
3. Connect USB with Mainboard
4. Keep pressing the Standby button on the TV and Switch ON the TV
5. Done

Here is below CV338H-T42 Firmware for free download:

Firmware Name:

T201712209A-CNC-MarJane-338H-T42-EMMC8G-HV320WHB-N8B-350MA-5KEY-MO10024385-20180106204006

T201711006A-CNC-MarJane-338H-T42-HV430FHB-N10-550MA-MO10023102-20171122201451

WEIYUE-STREAM-338H- the T42-T430QVN01_2-540MA-ALGERIA- the SS-2016-12-26-2057_MO18000413_NOFAC

Yingshi-BBK-21006395-32DK1-338H-T42-ST3151A04-570MA-RUSSIA-1G-4G-MO10023371-2017-11-28-175338

HKC_ANDROID_CV338H-T42_1G_4G_1366X768_560mA_700maMaxLevel_EAR_PHONE_ (MO10018388) 20170518102921_32C1NB_SUPRA_K83IR

New Universal LCD/LED Controller Board

Basic Info:

Model No. T.R83.03 V3

Main Chipset: RDA 8503C

Trademark: CXEL

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware T.R.83.03 Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plug in the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following given software/firmware is USB Bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download T.R83.03 Firmware:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

T.R83.03 Firmware All resolutions Free Download Here :

TP.RT2982.PD811 Smart LED TV Board

TP.RT2982.PD811 is a network smart android board that is designed for Asian Markets and the Middle East as well. TP_RT2982_PD811 is a full HD smart board that can support 32-46-inch LCD/LED TVs. TP-RT2982-PD811 is a new Android single-chip solution from Realtek. It has ARM Quad-core A7 CPU/3DGPU and 512M DDR3 (supports external expansion up to 1.5G).

TP RT2982 PD811 supports external 4G EMMC. TP.RT2982.PD811 has multiple interface input ports such as Dual HDMI, Dual AV, Dual USB, VGA input interface, and RJ45 Ethernet connector for wired internet connectivity.

General Specifications:

Board Model: TP.RT2982.PD811

Supported Panels: 32-55 Inch

Supported Resolution: 1920×1080 FHD

RAM: 512 Mb DDR3

ROM: 4 GB emmc

Main Processor CPU: ARM Quad-core A7

Panel Power:  12v

Backlight: max 700 mA

Audio Power Output: 2x8w (8ohm)

System: PAL/NTSC

WIFI Antenna: Yes (Built-in)

Power Rating: 100V~240V 50Hz/60Hz

Power Consumption: 110Watt

Service Mode:

Press the remote control: ” Menu 1 1 4 7 ” or ” Channel (signal source) 2580 ” a few boards as ” Menu 2580 ”

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of your required resolution and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

TP.RT2982.PD811 Firmware for free download:

• TP-RT2982-PD811-1920×1080-Eurostar-USB.part1
• TP-RT2982-PD811-1920×1080-Eurostar-USB.part2
• TP-RT2982-PD811-1920×1080-KONKA-USB
• TP-RT2982-PD811-1920×1080-SamsungIR.part1
• TP-RT2982-PD811-1920×1080-SamsungIR.part2

RR83.03D Universal Driver Board

RR83.03D is an analog LCD/LED a multi-purpose and energy-efficient driver Controller Board that is suitable with most types of panels but not all. This board is designed for especially the Asia Pacific and the Middle East. RR83 03D can support the Russian language also. RR83-03D supports high screen 1920×1080, 7-55 inch LVDS screens. Not only USB interface can be used to play Video/music/photo formats are supported but it is not supported AC3 Audio, you can also display a boot photo or LOGO as well and can upgrade/install software with it.

RR83.03D board has all the necessary connectivity interfaces for the user’s convenience. It has HDMI input for connecting Digital High Definition devices, USB input for software upgrades and multimedia playback, Composite input for connecting analog devices, VGA interface for computer and laptop, and headphones out 3.5mm jack.

General Specifications:

Model: RR83.03D

Main Chipset: RDA8503C

OSD Language: Russian, English, Chinese, French, German, Italian, Burmese

Panel Size: 7-55 inch LVDS screen

Max Resolution: 1920*1080

Input Interface: PC / HDMI / TV / USB multimedia playing

Panel Power Voltage: 3.3V,5V,12V

Interface: Single/Dual LVDS(6/8bit)

Max Audio Output Power: 2x3W(4Ω)

EARPHONE: 2*10mW(32ohm)(max)

FR input: ATV Receiving

Video System: PAL, SECAM, NTSC

Power Input: DC 12V 3-5A, 4A is the best

Standby Power Consumption: <0.5W(board only)

Note:  The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts and then extract any one of them you will get the folder. For More Details about the download process, watch the video Click Here

RR83.03D Firmware for Free Download:

• RR83.03D-RR8503-All-Resolution-USB.part1
• RR83.03D-RR8503-All-Resolution-USB.part2