Tag Archives: All Universal Board Software Free Download

DPD-TV956A-V1.1 Universal Board

DPD-TV956A-V1.1 is a small universal LCD/LED TV Driver Controller Board with DC input power and Jumper cap setting for Panel VCC.

Basic Info:

Model No. DPD-TV956A-V1.1

Main Chipset: TSUMV59XU-Z1

Trademark:

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plugin the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait even IR indicator led flashing in the speed
4. Done. Unplug the U-disk (It will take a max of 1 min to upgrade firmware)
5. It continues to flash and never stops. This is normal, just wait about 1 minute, this means that the update is complete. Then turn off and turn off the u-disk

Factory Service Mode:

Menu+1147

Note:

If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download your required software and then extract it you will get the folder. Now copy the files to USB or load them with Programmer. For More Detail about the download process, watch the video Click Here

DPD-TV956A-V1.1 Firmware Files Free Download:

• DPD_TV956A_V1.1_1280x1024_2MB
• DPD_TV956A_V1.1_1280x1024_4MB
• DPD_TV956A_V1.1_1440x900_2MB

For video tutorials, visit “Kazmi Elecom” my youtube channel.

TP.S506.PB801 LCD/LED TV Driver Board

TP.S506.PB801 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 24-inch to 42-Inches LED panels which a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. TP_S506_PB801 has HDMI port support of 1.4 and HDCP support of 1.1. TP-S506-PB801 is compatible with Non-HD and FHD LCD/LED panel screens. TP.S506.PB801 is widescreen-supported and also has a multi-language option. TP.S506.PB801 has its special feature of  Mini AV, Scart, and VGA connectivity .TP.S506.PB801 software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: TP.S506.PB801

Main Chipset:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V / +3.3V DC (Jumper Setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Bin Name: SIS506_xx.bin

Firmware Type: Backup Dump

Note: Following firmware collection is a USB Boot and Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

TP.S506.PB801 Firmware Collection Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV59H-BPW LED TV Board

CV59H-BPW is a simple ATV Drive Board designed for LCD/LED TVs. This Board is suitable for the Asia Pacific and the Middle East markets. This is not a Combo Board the main power module and LED Backlight Inverter module is required separately while the TV Tuner is placed into this PCB of the motherboard. This has all the features and connectivity interface as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Headphone jack. CV59H-BPW software files are given for the technician’s support.

General Specifications:

Brand/Mark: Universal FHD Board

Model: CV59H- DPW

Main Chip: TSUMV59XUS-Z1

Product: LED TV

LED Backlight: NA

Flash IC: 4Mb

Screen supported: 32-40 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Menu+1147

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

CV59H-DPW firmware for free download:

RR8501.C753A LED TV Board

RR8501.C753A is a standard LCD/LED Driver Controller Board that is suitable for any type of panel. This board is designed for especially the Asia Pacific and the Middle East. This Board has further bifurcations with the same chipset RDA8501. RR8501-C753A is a combo board which means the LED backlight driver board, power supply module, and ATV module are inbuilt in a single piece.

RR8501.C753A has all the connectivity user interfaces such as HDMI, AV, VGA, USB, and RF ports. It is suitable for 24″ to 32 inches screens.

General Specifications:

Model: RR8501.C753A

Main Chipset: RDA8501

OSD Language: Asia English, Chinese, French, Spanish, Portuguese

Panel Size: Up to 32″

Max Resolution: 1920*1080

Panel Power Voltage: 5V,12V

Interface: Single/Dual LVDS(8bit)

Sound IC: RDA3118

Tuner IC: 5160

Max Audio Output Power: 2x5W

Power Input: 220V AC

Note: The following given software is a backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download firmware files:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

RR8501.C753A Firmware for Free Download:

• RR8501.C753A_ 1366X768_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Unfortunately, Launcher has Stopped. Smart Android LED TV Software Issue:

CV59H-C LED TV Board

CV59H-C is a simple ATV Drive Board designed for LCD/LED TVs. This Board is suitable for the Asia Pacific and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter module are required separately while the TV Tuner is placed into this PCB of the motherboard. This has all the features and connectivity interface as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Headphone jack. CV59H-C software files are given for the technician’s support.

General Specifications:

Brand/Mark: Universal FHD Board

Model: CV59H-C

Main Chip: TSUMV59XE-Z1

Product: LED TV

LED Backlight: NA

Backlight Current: mA

Flash IC: 4Mb

Screen supported: 43~65 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Menu+1147

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

CV59H-C firmware for free download:

TP.VST59.PA551 Universal TV Board

TP.VST59.PA551 is a non-smart universal LCD/LED TV Combo Controller Board.

Basic Info:

Model No. TP.VST59.PA551 (Combo Board)

Main Chipset: TSUMV59XU-Z1

LED Backlight: 220mA to 300mA

Display Format: 1080 FHD

Panel Supported: 19″ t0 26″

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC 220V

Maximum Current: 3000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (*. Bin file) to the U disk.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keypad and IR also

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu+1147

Note The following given firmware is USB bootable and dumps backup files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dumping files then read here first.

How to Download firmware files:

Download the following given firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

TP.VST59.PA551 Firmware Free Download:

• TP-VST59-PA551_1366x768_HISENSE_DUMP
• TP-VST59-PA551_1366x768_LLOYD_DUMP
• TP-VST59-PA551_1600x900_CONDOR_USB

For video tutorials, visit “Kazmi Elecom” my youtube channel.

TSUMV59-T8C1 LED TV Driver Board

TSUMV59-T8C1 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 24-inch to 42-Inches LED panels which a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. TUSMV59.T8C1 has multiple HDMI ports that support 1.4 and its HDCP support 1.1. TSUMV59_T8C1 is compatible with Non-HD and FHD LCD/LED panel screens. TSUMV59 T8C1 is widescreen-supported and also has a multi-language option. TSUMV59_T8C1 has its special feature of Dual AV extendable.TSUMV59-T8C1 software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: TSUMV59-T8C1

Main Chipset: TSUMV59

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following TSUMV59-T8C1 firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

TSUMV59-T8C1 Firmware Collection Free Download Here :

TSUMV59-T4C1 LED TV Board

TSUMV59-T4C1 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 24-inch to 42-Inches LED panels which a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. TUSMV59.T4C1 has multiple HDMI ports that support 1.4 and its HDCP support 1.1. TSUMV59_T4C1 is compatible with Non-HD and FHD LCD/LED panel screens. TSUMV59-T4C1 is widescreen-supported and also has a multi-language option. TSUMV59-T4C1 has its special feature of Dual AV extendable.TSUMV59-T4C1 software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: TSUMV59-T4C1

Main Chipset: TSUMV59

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

TSUMV59-T4C1 Firmware Collection Free Download Here :

MSDV3222-ZC01-01 LED TV Board

MSDV3222-ZC01-01 is a simple ATV Driver Motherboard designed for LCD/LED TVs. MSDV3222_ZC01_01 board is suitable for the Asia Pacific and the Middle East markets. It is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. MSDV3222 ZC01 01 has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.MSDV3222-ZC01-01 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: MSDV3222-ZC01-01

Main Chip:

Product: LED TV

LED Backlight:

Flash IC: 8Mb

Sound Chip:

Tuner IC:

Screen supported: 18.5-32 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

MSDV3222-ZC01-01 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Unfortunately, Launcher has Stopped. Smart Android LED TV Software Issue:

TSUMV59-T4C2 FHD LED TV Board

TSUMV59-T4C2 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 24-inch to 42-Inches LED panels which a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. TUSMV59.T4C2 has multiple HDMI ports that support 1.4 and its HDCP support 1.1. TSUMV59_T4C2 is compatible with Non-HD and FHD LCD/LED panel screens. TSUMV59-T4C2 is widescreen-supported and also has a multi-language option. TSUMV59-T4C2 has its special feature of Dual AV extendable.TSUMV59-T4C2 software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: TSUMV59-T4C2

Main Chipset: TSUMV59

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

TSUMV59-T4C2 Firmware Collection Free Download Here :