Tag Archives: All Universal Board Firmware Free Download

JUC7.820.00018451 LCD TV Board

JUC7.820.00018451 is a simple ATV and DTV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. JUC7.820.00018451 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: JUC7.820.00018451

Chassis: LS23

Main Chip: MST721DU-LF

Product: LCD TV

LED Backlight: mA

Flash IC: 25X40

Sound Chip: TDA1517P

Tuner IC: ATV

Screen supported: 19-29 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

JUC7.820.00037562 firmware for free download:

• JUC7-820-00018451 CHANGHONG LT22610
• JUC7-820-00018451 CHANGHONG LT22620
• JUC7-820-00018451 CHANGHONG LT22629
• JUC7-820-00018451 CHANGHONG LT22710
• JUC7-820-00018451 CHANGHONG LT22810

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

TP.S512C.PB772 LED TV Board

TP.S512C.PB772 is a simple DVB + SAT Driver Board designed for LCD/LED TVs. This Board is suitable for the Asia Pacific and the Middle East markets. This Combo Board has the integration of the main power module, LED Backlight Inverter Circuit, and ATV Card in a single piece of a motherboard. This has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Headphone jack. TP_S512C_PB772 is compatible with all panel screens of backlight current 350mA-600mA depending on hardware specifications. TP-S512C-PB772 firmware files are shared in this post below for the technician’s support.

General Specifications:

Brand/Mark: Universal HD Three-in-One Board

Model: TP.S512C.PB77 RD512K

Main Chip: RD512SP

Product: LED TV

LED Backlight Capacity: 300-350mA

LED Backlight: 72~79V

Flash IC: 8Mb

Screen supported: 40-50 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Tuner: DVB + SAT

Mirror Option: NA

Service Code:

Input

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

TP.S512C.PB772 firmware for free download:

• TP-S512C-PB772 TCL-40
• TP-S512C-PB772 TCL-43

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

MIRC59XUS V1.0-A LED TV Board

Basic Info:

Model No. MIRC59XUS V1.0-A

Main Chipset: TSUMV59XUS-Z1

Tuner: CDT-3SP512-36

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Factory Setting Mode:

Menu+1147 Or Input+2580

Note:

If you are new and do not have enough knowledge of loading or installing software/firmware or dumping files then read here first.

How to Download:

Download your required software and then extract it you will get the folder. Now copy the files to USB or load them with Programmer. For More Detail about the download process, watch the video Click Here

MIRC59XUS V1.0-A firmware for free download:

• MIRC59XUS-V1.0-A_1366x768_ONIDA_DUMP
• MIRC59XUS-V1.0-A_1366x768_ONIDA_USB
• MIRC59XUS-V1.0-A_1920x1080_ONIDA_DUMP
• MIRC59XUS-V1.0-A_1920x1080_ONIDA_USB

For video tutorials, visit “Kazmi Elecom” my youtube channel.

RR52C.03A Universal Board

RR52C.03A is a universal LCD/LED TV Controller board that is designed for Asian countries. RR52C-03A supports a high screen resolution of FHD panels. It supports high-resolution 1920*1200 15-32 inch LVDS screens.

Basic Info:

Model No. RR52C.03A

Chipset: RDA 512C CWCJ 4111 816X

Support Language: Russian, English, Chinese, French, Vietnamese

Display Format: 1080p

Max Resolution: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Mirror Enable: Yes

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt 4Amp

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software (RR52C.bin) into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator led flashes alternately in red and green
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)
5. This is normal, just wait about 1 minute, this means that the update is complete. Then turn it off and turn it on also remove the u-disk

Factory Service Mode:

Input

Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

RR52C.03A Firmware All resolutions Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV59L-E LED TV Board

CV59L-E is a simple ATV Driver Motherboard designed for LCD/LED TVs. CV59L_E board is suitable for the Asia Pacific and the Middle East markets.CV59L.E is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but the ATV Card is builtin into this motherboard. CV59L E has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.CV59L-E firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CV59L_E

Main Chip: TSUMV59XU-Z1

Product: LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:

Screen supported: 15-24 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input+2580

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

CV59L-E firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Dead Android Smart Board Recovery by Mboot File.

CV59L-G LED TV Board

CV59L-G is a simple ATV Driver Motherboard designed for LCD/LED TVs. CV59L_G board is suitable for the Asia Pacific and the Middle East markets.CV59L.G is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but the ATV Card is builtin into this motherboard. CV59L G has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.CV59L-G firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CV59L_G

Main Chip: TSUMV59XE/TSUMV59XU-Z1

Product: LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:

Screen supported: 15-24 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input+2580

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

CV59L-G firmware for free download:

TP.MS3663T.PB757 LED TV Board

TP.MS3663T.PB757 is a combo LCD/LED TV Driver Board. It has two types of memory, the SPI memory for non-smart features and the Nand memory for smart features depending upon hardware and software configuration. It has also the option of a Dual tuner. This LED TV Driver board has all the connectivity user interface like HDMI, USB, Scart, AV, and RF but without a VGA interface. TP.MS3663T.PB757 software files are shared in this post for the technician’s support.

General Features and Specifications:

Brand/Mark: China Universal

Model: TP.MS3663T.PB757

Main Chipset:

Product: LED TV

Resolution: 1920×1080

Panel: 32 to 40 Inch

Backlight: 300mA 48 W

HDMI Ports: 2

Component: Yes

Tuner: 1 (2nd optional)

USB Ports: 2

VGA Port: No

Scart: 1 (Optional)

DTS Studio Sound™ Yes

Analog Audio Out AV Out

Digital Audio Out (SPDIF) Yes

Service Code:

Flash Size: SPI 8 Mb OR Nand 132 Mb

Firmware Type: Backup Dump

Firmware Name:

Note: The following given firmware dump backup files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware and then extract you will get the folder. Now load the file by the programmer. For More Detail about the download, process watch the video Click Here

TP.MS3663T.PB757 firmware files free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Unfortunately, Launcher has Stopped. Smart Android LED TV Software Issue:

TSUMV59-T9C1 LED TV Board

TSUMV59-T9C1 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 24-inch to 42-Inches LED panels which a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. TUSMV59.T9C1 has multiple HDMI ports that support 1.4 and its HDCP support 1.1. TSUMV59_T9C1 is compatible with Non-HD and FHD LCD/LED panel screens. TSUMV59 T9C1 is widescreen-supported and also has a multi-language option. TSUMV59_T9C1 has its special feature of Dual AV extendable.TSUMV59-T9C1 software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: TSUMV59-T9C1

Main Chipset: TSUMV59

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

TSUMV59-T9C1 Firmware Collection Free Download Here :

• TSUMV59_T9C1_1366x768_HAIER
• TSUMV59_T9C1_1366x768_STARLIFE
• TSUMV59_T9C1_1366x768_TCL

CV59L-L Universal Board

CV59L-L Software collection is shared in this post for the technician’s support.

Basic Info:

Model No. CV59L-L

Main Chipset: TSUMV59XU-Z1

Trademark:

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Board Size: 168.00 X 42.0 (mm)

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, SCART, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

CV59L-L Software Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.

ZP.VST.3463G.A Digital TV Board

ZP.VST.3463G.A is an ATV/DTV  Digital Driver Motherboard designed for LCD/LED TVs that Supports DVB-T2 / DVB-S2 / DVB-C With CI Card + 7 Key Switch. ZP_VST_3463G.A board is suitable for the Asia Pacific and the Middle East markets.CV59L.C is a Combo Board. The main power module and LED Backlight Inverter Circuit module and the ATV/DTV Tuner Card are builtin into this motherboard. ZP VST 3463G.A has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. ZP.VST.3463G.Firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: ZP.VST.3463G.A

Main Chip: MSD3463

Product: LED TV

LED Backlight: mA

Flash IC: 8Mb

Sound Chip:

Tuner IC:

Screen supported: 32-40 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input+2580

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

ZP.VST.3463G.A firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.