40-MT56SE-MAC2HG LED TV Board
40-MT56SE-MAC2HG is a smart LED TV motherboard. Its supported resolution is 1920×1080 Full HD 1080 Pixels. It is a Combo three-in-one driver controller board. The main power supply input module is combined with an LED backlight driver inverter module and cable TV tuners. The sound card is also built on a single PCB. Audio output with stereo dual speaker is 16 watts. Its main storage memory (ROM) is 4GB EMMC And Flash. It has a built-in WiFi system. It has dual TV tuners for analog signal reception and digital signal reception.
40-MT56SE-MAC2HG board has multiple user connectivity interfaces such as a CI+ interface and a dual HDMI input interface for connecting Digital devices such as Play Stations, Digital Cameras, Set-Top boxes, Gaming Consoles, etc. It has mini composite ports for connecting analog devices. It has dual USB input ports to connect USB devices, play multimedia files, and upgrade software. For wired internet connectivity, it has an Ethernet port (LAN) to get faster and smooth browsing.
40-MT56SE-MAC2HG General Information:
Model Name: 40-MT56SE-MAC2HG
Chassis: MT565SE
Main Chipset: MediaTek MT5655VGNJ
Software Version: V8-MT56552-LF1V
Resolution: 1920×1080
Processor: MediaTek
RAM: 512 MB
ROM: 4 GB EMMC
EMMC: Toshiba THGBMG5D1LBAIL
EEPROM: 24C32
Aspect Ratio: 16:09
Audio Power Output: 16w (8×2)
System: PAL//SECAM/NTSC
Dual Tuner: Yes
Digital Tuner: DVB-T, DVB-T2, DVB-C, DVB-S2
HDMI: 2
USB Ports: 2
VGA: No
SPDIF: No
Scart: No
CI+=Yes
LAN: Yes (RJ45)
Firmware:
Firmware Type: EMMC Backup Dump
Service Menu Code:
Menu Contrast 1950. For more Service Menu Codes visit Here.
40-MT56SE-MAC2HGTechnical Specifications:
- Manufacturer: China
- Display Type: 2K
- Screen Resolution: Full HD (1920×1080)
- SMART TV support: Yes
- Digital tuner: Yes
- Panel type: LED
- Screen format: 16:9
- Wi-Fi Connectivity: Yes
- Inputs: AV, HDMI x2, USB x2, Ethernet (RJ-45), Wi-Fi 802.11ac, CI
- Outputs: Optic
- Sound system: 2×8 W
- Dolby: Yes
- Supported formats: MPG, MPEG, MPEG2-PS, MP4, MKV, AVI, ASF, FLV, MP3, JPEG, PNG, BMP
- Operating system: Linux
- Refresh rate: 60 Hz
- Wireless data transmission: Miracast
- Contrast Ratio: 3,000,000: 1
- Response Time: 2ms
- Color System: PAL, SECAM, NTSC
- Digital Tuner: DVB-T, DVB-T2, DVB-C, DVB-S2
- TV System: PAL / NTSC
- Operating System Linux
- Component In (RGB Cable) Yes
- Composite In (Audio Video Cable) Yes
- Headphone Jack Yes
- Sound Technology Dolby Digital Decoder
- Wi-Fi Type 2.4GHz Wi-Fi 802.11 b/g/n 2T2R
- CPU Dual Core A9 896MHz
- GPU Dual Core MALI 400MHz
- RAM/ROM 768M Byte DDR3 / 4G Byte eMMC
How to Write 40-MT56SE-MAC2HG EMMC Backup:
- Download the given 40-MT56SE-MAC2HG EMMC backup shared in this post below
- Note the EMMC Pinouts in the given picture above
- Jtag the mainboard with the Programming Tool
- Write the EMMC data
- Done.
Note: The following 40-MT56SE-MAC2HG firmware is USB bootable and a backup dump file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.
40-MT56SE-MAC2HG Firmware files for free download:
