TP.VST59S.PB758 6MV59AX3 is a universal LCD/LED Boards that has Full HD resolution Supported up to 1920×1080. TP_VST59S_PB758 6MV59AX3 is a combo board means the main power supply, ATV board, and LED backlight driver board are built in a single PCB.
6MV59AX3 has dual AV and dual HDMI ports. TP-VST59S-PB758 6MV59AX3 firmware files are given below for the technician’s support.
General Specifications:
Brand/Mark: China Universal
Model: TP.VST59S.PB758 6MV59AX3
Main Chip: TSUMV59
TV System: PAL\SECAM\NTSC
Product: LED TV
Input Voltage: 220V AC
MAX Backlight Watt: 45W
Backlight voltage:
Tuner: R840
Resolution: up to 1920×1080
Firmware Name: bin_v59s.bin
Service Menu:
Menu 1147
Note: The following given firmware is a dump backup and USB upgrade. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download TP.VST59S.PB758 6MV59AX3 Firmware Files:
Download the following firmware and then extract it. You will get the folder. Now load the file by a programmer. For More Details about the download, process watch the video Click Here
TP.VST59S.PB758 6MV59AX3 firmware for free download:
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out
Audio O/P Power: 2 x 3 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for motherboard only)
Maximum Current for USB: 500mA
How to Upgrade Firmware:
Step 1: Empty the U disk
Step 2: Copy the corresponding resolution program (*. Bin file) with the TXT file to the U disk base on your screen size.
Step 3: Connect the U disk with Mainboard
Step 4: Connect the Keyboard and TV Mainboard
Step 5: Connect the power supply, check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,
(Note: *During Step 5,the power supply can’t be cut off *The same firmware can only be burned once time)
Factory Service Mode:
Menu+1147
Note:
If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read herefirst.
How to Download:
Download your required software and then extract it you will get the folder. Now copy the files to USB or load with Programmer. For More Detail about the download process, watch the video Click Here
T.VST59.031 Firmware All resolutions Free Download Here :
