T.SK106A.03 Firmware Free Download

T.SK106A.03 Universal LCD/LED TV Board

T.SK106A.03 is a small universal Analog Signal LCD/LED TV driver board. It can support 15-inch to 55-inch LCD LED screen panels. Its supported resolution is Full HD 1920×1080. This is not a three-in-one TV board. A separate backlight driver card will be required to turn on the backlights and a power module is also required separately to power up the complete system. DC 12 volt is required for the mainboard input power supply.

Basic Info:

Model No. T.SK106A.03

Main Chipset: Hi3731

Display Format: up to 1920×1200 (FHD)

Supported Screens: up to 42″

Aspect Ratio: 4:3, 16:9 & 16:10

TV Format: Analog Signal

Support Language: Russian, English, Hindi, Simplified Chinese, Khmer, Vietnamese, Myanmar, French, German, Italian, Spanish

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: LVDS Double 6/8

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Screen voltage: 3.3V / 5V / 12V (Jump cap)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 3-5 Amp

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Not only USB interface can be used to upgrade programs, but also can be used to play video/music/photo formats. You can also set a boot display pictures or LOGO and Mirror Enable.

How to Upgrade T.SK106A.03 Program:

1. Copy the Required bin file in FAT32 USB Disk
2. Plugin the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led flashing stop (or flashing speedily)
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147, Input_2580

Firmware Name: V110.bin

Firmware Type: USB upgradeable

Caution: 

All the pictures and specification details related to T.SK106A.03 in this post is for reference only. If you are a user and do not have any experience of repairing then it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different as per the visual observations. So, please do not try it at home.

Pros:

There are many advantages to installing the given T.SK106A.03 USB software or backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given software backup file
• Remote and Logo may change at your own choice to satisfy the customer
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given T.SK106A.03 USB software or backup dump file. But it depends on the technician or user as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Remote Control may not work and the Logo may change by writing the given software
• Panel screen parameters may be changed

T.SK106A.03 Version Upgrade:

Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only in case the default software malfunctions due to some bugs then the manufacturer will provide the software update. Otherwise, no version update is issued.

T.SK106A.03 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then search for the board that has the same specifications and latest features to avoid any difficulties. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is USB bootable and a backup file that can be loaded by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download T.SK106A.03 Firmware files:

Download your required T.SK106A.03 resolution file and then extract them you will get the folder. Now copy the bin and text files to USB. For more Details about the download process watch the video Click Here

T.SK106A.03 Firmware All resolutions Free Download:

S.NO.	BOARD/DESCRIPTION	DOWNLOAD LINK
1	T.SK106.03_800x600_Firmware_USB	Download
2	T.SK106.03_1024x600_Firmware_USB	Download
3	T.SK106.03_1024x768_Firmware_USB	Download
4	T.SK106.03_1280x768_Firmware_USB	Download
5	T.SK106.03_1280x800_Firmware_USB	Download
6	T.SK106.03_1280x1024_Firmware_USB	Download
7	T.SK106.03_1366x768_Firmware_USB	Download
8	T.SK106.03_1400x1050_Firmware_USB	Download
9	T.SK106.03_1440x900_Firmware_USB	Download
10	T.SK106.03_1600x900_Firmware_USB	Download
11	T.SK106.03_1600x1200_Firmware_USB	Download
12	T.SK106.03_1680x1050_Firmware_USB	Download
13	T.SK106.03_1920x1080_Firmware_USB	Download
14	T.SK106.03_1920x1200_Firmware_USB	Download