Seleco SN32DXX13 LED TV
Seleco SN32DXX13 is a 32-inch 81cm Smart High Definition LED TV with a maximum supported resolution of 1366×768. It is a direct-backlight LED TV with great features. Its sound output is 12-watt RMS Dolby Digital Plus. It has a digital TV tuner (DVB-T2, DVB-C, DVB-S2) and an analog TV tuner (NTSC, PAL, SECAM). Its refresh rate is 60Hz.
Seleco SN32DXX13 has multiple input-output interfaces for user connectivity, such as the Number of HDMI connections: 3, the Number of USB ports: 2, PC input (VGA) Certified, and Other connections: IEC75 antenna, Common Interface Plus (CI+), WiFi Direct, Ethernet LAN: RJ-45 Digital audio output: (optical) PC-in: VGA + audio L/R-in Headphone output and Service connection.
General Features & Specifications:
Brand: Seleco
Model: SN32DXX13
Main Board: HK.T.RT2842
Display Format: HD 720P WXGA
Screen Type: LED
Screen Resolution: 1366×768
Features Format: Smart
OS Version: Android 9.0
Chipset: Realtek
Processor: Quad-Core
Graphic Processor: Dual-core
RAM Capacity: 1 GB DDR3
Storage Memory: 8GB ROM
No of HDMI Ports: 3
No of USB Ports: 2
Wi-Fi Type: Wi-Fi
Built-In Wi-Fi: Yes
Ethernet (RJ45): Yes
Speaker Output: 12W
Tuner: Digital TV (DVB-T2); Cable TV (DVB-C)
Power Requirement: AC 180 – 240 V, 50/60 Hz
Power Consumption: 60 W
Firmware Type: USB Bootable
Firmware Name: RTK2842P.img
Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.
Seleco SN32DXX13 Firmware for free download:
