PHILIPS 39PFL3850 Firmware Free Download

PHILIPS 39PFL3850 LED TV

PHILIPS 39PFL3850 is a 39-inch Full HD LED TV with a resolution of 1920×1080. 39PFL3850 is a non-smart TV. 39PFL3850 LED TV has all the latest features and connectivity ports as an HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is horizontal: 170 degrees and vertical: 160 degrees. 39PFL3850 has additional edge-led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. PHILIPS Firmware file is given below for the technician’s support. For more PHILIPS Firmware collection visit here.

General Specifications & Features:

Make: PHILIPS

Model: 39PFL3850/V7 A11

Display Size: 39″

Storage Memory: 4 MB

HD Technology: Full HD

Panel: FHD

No of HDMI Ports: 4

No of USB Ports: 2

No of AV Ports: 1

Speaker Output RMS: 20W (10W*2)

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: 90 W, 0.5 W (Standby)

Firmware Type: USB Bootable

Firmware Name: PHILIPS.bin

Main Board: NA

PHILIPS 39PFL3850 Price:

This model is now discontinued. Maybe you can find it in old stock. The price of this LED TV is approximately USD but keep in mind the price should be varies according to the dollar rate in Pakistan. Convert the dollar rate in rupees to get the approximate price in PKR. You can also convert the dollar rate in Indian rupees to get the local currency value.

Caution: 

All the pictures given in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

Pros:

There are many advantages to installing the given PHILIPS 39PFL3850 USB software or backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given software backup file
• The Original Remote and Logo as per the model specifications
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given PHILIPS 39PFL3850 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Version change may cause trouble
• Panel screen parameters may be changed

PHILIPS 39PFL3850 Version Upgrade:

Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only if, the default software is malfunctioning due to some bugs then the manufacturer will provide the software update. Otherwise, no version update is issued.

PHILIPS 39PFL3850 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then a universal china non-combo board can be installed in it. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first. Always keep a backup before writing the flash.

PHILIPS 39PFL3850 Firmware file free download.

For video tutorials, visit “Kazmi Elecom” on my YouTube channel.