ISTAR A9900G Satellite Receiver
ISTAR A9900G dump file or Flash file is a basic boot instructions and information software program for a receiver that is written on EEPROM or Flash IC or Memory IC of the satellite receiver. When powered on the main processor/Microcontroller retrieves the information from memory to know how to work/boot if it fails to get the boot information then it may stuck on the power/red light or boot logo screen.
Sometimes the Memory IC or SPI Flash of the ISTAR A9900G satellite receiver is imperfect due to technical errors or Its built-in firmware/program crashes because of an error. It has the ability to support all types of external hard drives and all types of USB hubs with a media player with the ability to support audio and video formats such as MKV, AVI, FLV, DivX, MP4, and Mp3. The dump file of ISTAR A9900G is given below for technician/user support.
ISTAR A9900G General Information:
Manufacturer: iSTAR
Box Model: A9900G
Main Board:
Main Controller or Chipset:
Hardware Version:
Software Version:
Loader: Sun-Plus
Box Type: Digital Full HD
Flash Type: SPI SOP8/SOIC8
Flash Size: 16 Mb (ROM)
RAM: 512 MB DDR3
Software Type: Backup Dump
Software Size: Mb
Download File Format: ZIP
Download Type: Free
Technical Specifications and Features of ISTAR A9900G:
- Fully DVB-S2/MPEG2/MPEG-4 H.264/AVC Compliant.
- 6,000 Channel Capacity.
- Dual Core Main CPU.
- Flash Memory: 4MB, DDR RAM:256MB.
- Displaying both “HD & SD” Channels and Media Contents.
- Operating System: RTOS. & “Next”. 32Bits HD Quality Unique.
- OSD and Graphic Supporting.
- Super-Fast Setting & Using.
- 3D to 2D Conversion Capability.
- Teletext & Subtitle & Multi-feed Support.
- SELL to IP supporting.
- Two Channels Simultaneously Recording.
- Recording TV Channels and Timeshift Functions through USB Devices.
- Playing Different Video and Music Files, Displaying Pictures.
- 1920x1080p, 1920x1080i, 1280×720, 720×480 Video Resolutions Option.
- 260 mm Front Panels with “8-Digit” VFD Display.
- Outputs: HDMI. Output, Analogue Output (3 x RCA – CVBS, L, R Stereo Audio).
- Coaxial Digital Audio Output -SPDIF.
- Smart Card Reader (CA).
- Tuner Loop Through Output.
- Ethernet Interface RJ-45 10M/100M.
- Dual USB 2.0 Ports for simultaneously using USB HDD and USB.
- Wi-Fi Device (MTK 7601).
- 3G USB.
- Modem Supporting and Video On Demand (VoD) Supporting.
- Firmware upgrades via USB ports, RS-232, and networks are supported.
- Operating Voltage: 100VAC~240VAC 50Hz/60Hz
- Digital HD Satellite Receiver.
- DVB-S2/MPEG2/MPEG-4 H.264/AVC, Full Compatibility.
How to Load with Programmer:
- Download the given ISTAR A9900G Dump file
- Unzip the file to the folder
- Copy the bin file to the USB disk or keep it on the hard disk
- Remove the Flash IC from the Receiver PCB board
- Connect the programming tool
- Put the Flash ic on the Programmer
- Write the Flash ic with the required dump file
- Resold it back to the receiver motherboard
- On the receiver Now it’s working
Note:
The ISTAR A9900G receiver software provided below is a backup dump file. It can be loaded using a programming tool or a loader tool on a non-functional receiver, or it can be used to upgrade or downgrade the SPI Flash Memory of a functioning satellite receiver through the USB upgrade process or the RS232 upgrade tool. Please note that the Kazmi Elecom Team is not liable for any damage or loss that may occur from uploading or downloading the software. Always ensure you have a backup before loading the USB software or writing to the SPI flash memory. For more Dump Files Visit Here.
