Haier LE32B8500 Software Free Download

Haier LE32B8500 LED TV

Haier LE32B8500 is a 32-inch HD Ready LED TV with a resolution of 1366×768. LE32B8500 is a non-smart tv. LE32B8500 LED TV has all the latest features and connectivity ports, such as an HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is very good as vertically 160 degrees and horizontally 170 degrees. LE32B8500 has a lower response time as low as 5 mili second. It also has some extra features like Digital Noise Reduction, Comb Filter, and Intelligent picture scan. Contract, sharpness, and brightness are outstanding. The Haier Software file is given below for the technician’s support.

General Features & Specifications:

Mark: Haier

Product: LED TV

Model: LE32B8500

Display Size: 32″

Resolution: 1366×768 (HD)

Panel: HD

HDMI Ports: 2

USB Ports: 2

AV Ports: 2

Speaker Output RMS: 16w

Main Board: MSOV561-ZC01-01

Flash IC: 4Mb

Power Supply Input: 240 V AC

Power Consumption: 45W

Software Type: Backup Dump

Software Name: NA

Caution: 

All the pictures and specification details related to Haier LE32B8500 in this post are for reference only. If you are a user and do not have any repair experience, it is better to visit the nearest technician first without loading the software/firmware. Sometimes, the fault is different based on the visual observations. So, please do not try it at home.

Pros:

There are many advantages to installing the given Haier LE32B8500 USB software or backup dump file. A few benefits are described below:

• The dead board can be recovered and operational by loading the given software backup file
• The Original Remote and Logo as per the model specifications
• Money saving instead of changing the mainboard
• Time-saving instead of arranging a new board
• Customer satisfaction to do an urgent job
• Skill and confidence improvement

Cons:

There may be some disadvantages to installing the given Haier LE32B8500 USB software or backup dump file. But it depends on the technician or user, as per his understanding. A few drawbacks are described below:

• The working board may go to the standby position
• Version change may cause trouble
• Panel screen parameters may be changed

Haier LE32B8500 Version Upgrade:

Please note that the installed version in this board is the final version. So, no need to upgrade the software if the board is working normally. Only if, the default software is malfunctioning due to some bugs then the manufacturer will provide the software update. Otherwise, no version update is issued.

Haier LE32B8500 Board Replacement:

If the board is completely dead and no chance to repair then replace the same board as already installed. And if the same board is not available on the market then a universal china non-combo board can be installed in it. If the backlight module is faulty in the combo board then you can install only the backlight module separately then no need to change the whole board.

Note: The following firmware is a USB bootable file. Kazmi Elecom Team is not responsible for any damage/loss caused by uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

Free Download Link Here below of LE32B8500 Firmware: