EUROLINE ER-2050 Satellite Receiver
EUROLINE ER-2050 is a digital satellite receiver. A EUROLINE ER-2050 dump file or Flash file is a basic boot instructions and information software program for a receiver that is written on the satellite receiver’s EEPROM, Flash IC, or Memory IC. When powered on, the main processor/Microcontroller retrieves information from memory to know how to work/boot. If it fails to get the boot information, then it may get stuck on the power/red light or boot logo screen.
Sometimes, the EUROLINE ER-2050 satellite receiver’s memory IC or SPI Flash is imperfect due to technical errors, or its built-in firmware/program crashes because of an error. Its RAM capacity is 256 MB, and Its ROM (SPI Flash) capacity is 4 MB. The dump file of EUROLINE ER-2050 is given below for technician/user support to recover a dead or standby receiver.
EUROLINE ER-2050 General Information:
Manufacturer: EUROLINE
Box Model: ER-2050
Main Board:
Main Controller or Chipset:
Hardware Version:
Software Version:
Loader:
Box Type: Digital Full HD
Flash Type: SPI SOP8/SOIC8
Flash Size: 4 Mb (ROM)
RAM: 256 MB DDR2
Software Type: Backup Dump
Software Size: Mb
Download File Format: ZIP
Download Type: Free
How to Load with Programmer:
- Download the given EUROLINE ER-2050 Dump file
- Unzip the file to the folder
- Copy the bin file to the USB disk or keep it on the hard disk
- Remove the Flash IC from the Receiver PCB board
- Connect the programming tool
- Put the Flash ic on the Programmer
- Write the Flash ic with the required dump file
- Resold it back to the receiver motherboard
- On the receiver Now it’s working
Note:
The EUROLINE ER-2050 receiver software provided below is a backup dump file. It can be loaded using a programming tool or a loader tool on a non-functional receiver, or it can be used to upgrade or downgrade the SPI Flash Memory of a functioning satellite receiver through the USB upgrade process or the RS232 upgrade tool. Please note that the Kazmi Elecom Team is not liable for any damage or loss that may occur from uploading or downloading the software. Always ensure you have a backup before loading the USB software or writing to the SPI flash memory. For more Dump Files Visit Here.
