CV182H-T LCD TV Board
CV182H-T is a simple ATV Driver Motherboard intended for LCD TVs. It is designed to support Full HD LCD Panel Screens. This is a Non-Combo Board. For complete setup, the power input module and LCD Backlight Inverter driver Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements such as single HDMI input, single USB interface, single PC input, triple Component Inputs, and single ATV Cable TV Tuner.
Its USB interface can be used to update software/firmware and play multimedia files. It can also support Earphone output. CV182H-T is a Full HD-supported LCD LED TV controller board with a maximum resolution of 1920×1080. It can support 32 to 39-inch HD and FHD LCD panel screens. Mstar makes the main processor (MST6M182VG) and its graphics are also good. CV182H-T software backup files are shared in this post to train the technicians to repair LCD TV malfunctions.
General Features and Technical Specifications:
Brand/Mark: Universal Board
Model: CV182H-T -40 120220a
Main Chip: MST6M182VG
Product: LCD TV
LED Backlight: NA
Flash IC: 4Mb
Sound Chip: NA
Tuner IC: CDT-3SP512-37
Screen supported: 32-39 inch
Resolution: Up to 1920×1080
Panel Voltage: 5V, 12V
Power Input: 12V DC
Firmware Name: NA
Firmware Type: Backup Dump
Service Code:
Source/Input
Caution:
This post’s images and specifications for the CV182H-T are all for reference only. It is best to visit the closest specialist without loading the software or firmware if you are a user with no repair experience. On occasion, the problem differs from what is seen visually. Do not attempt this at home, please.
CV182H-T Board Replacement:
Replace the installed board with a new one if the old one is totally dead and cannot be repaired. Additionally, to avoid any problems, look for a board with the same specs and the newest features if the same board is not sold. In the event that the combo board’s backlight module malfunctions, you can replace just the malfunctioning backlight module without having to replace the entire board.
Note: The firmware that follows can be loaded using a programming tool and is USB-bootable. It is also a backup file. The Kazmi Elecom Team disclaims all liability for any kind of loss or damage incurred during the firmware download or upload process. Install the software after first inspecting and verifying the main board. If you’re new and don’t know enough about loading/installing software, firmware, or dump files, or if you’re having problems installing the firmware, go here and read this first. A backup should always be made before writing the flash.
CV182H-T firmware for free download:
