Changhong Ruba LED TV All Software Collection
Changhong Ruba LED TV is widely used in Pakistan. Each and Every Changhong Ruba LED TV has its specific program or software/firmware installed in its main Logic board by which the TV functions can be operated. An LED TV program is stored in the Flash IC memory chip. Sometimes, In some cases LED TV stops working due to technical reasons and does not properly display or the standby light remains red/blue. The TV did not start normally so we need to reprogram the LED TV with its specific firmware/software.
It is very necessary for us to have the backup dump of that LED TV to restore the TV to normal condition. So, here are some backup dump files of Changhong Ruba LED TV firmware for free Download to support the technicians. Download free Changhong Ruba LED TV bin files for your specific LED TV Model.
All following given firmware of Changhong Ruba LED TV are back-up with a programming tool and can be loaded into the TV with the programmer. Each LED TV Model has its own specific Software File that you can download for a specific model. It is advisable for all beginners that first save the backup of the old original software/firmware before installing new software or remove the original flash IC load the software in the new flash IC then mount it. In case of any trouble, you can replace back the original flash IC to avoid any issues.
Changhong Ruba LED TV boards do not have the option of Mirroring/flipping or inverting the picture function setting of the panel. So, if the picture is inverted or flipped then you should load the software of the upside-down picture. Some software in the given list is bifurcated and some or not. You may check it by yourself if you face such type of problems during the software installation.
In some cases, the main motherboard is the same but the channel tuning/scanning issue is observed. This is because the different tuner is mounted on the same board. So, you need to first verify the tuner ic part number to load the proper firmware.
Note:
All software files are saved from working Changhong Ruba LED TVs with the help of the Programming tool and can be loaded to an LED TV memory IC and written by the programmer. These firmware files may not support the USB upgrade method. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download your required resolution firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here
Changhong Ruba LED TV Firmware For Free Download:
For video tutorials, visit “Kazmi Elecom” my YouTube channel.
I NEED WANSA SMART LED SOFTWARE/FIRMWARE
model- WLE42D8856S
MAINBOARD- *3501907 REV-01 GB REM 4GB ROM
RESOLUTION 1920*1080 FULL HD
Dear sir I have need a flip software for Panasonic 32″ mirror problem..due to I am changing the panel.
Sir.android k software kesy istmal kry 100mb ya us se kam hota ha
sir I want a update software for 5808i 55 inch.
Don’t try to update. installed version is final.
sir i want software for MODEL CH-HXB3B-DTV-00-00
umair bhai yeh hy kia chez??
Boss model
Led55d4000i
Changhon ruba
Boss model
Led55d4000i
Changhon ruba
LED40D3900i software available???
No
mine also same same model 40inch changhong ruba led. main software ka socha ha k iska huan store ka lisence expire ho gya ha may b software update krne sa chal pra. bhai apka software update ho jaye to mjha v btana plz
is k updates nai ate
need software update from 4.0.4 to latest for tv model 3D55B4500i
usb update or programing
No need to update
AOA
NEED THE SOFTWARE FOR THE CHANGHONGRUBA 55 INCH LED MODEL NO
LED55D2200
i need to upgrade LED32D2200. Plz guide
Don’t need to update
assalam walekum g bhai jaan mujhe changhong ruba led32e5800i ka software chahiye board no ye hai bhai jaan tp.ms338.pb802 smart led hai penal no ye hai c320x15-e9-h mere mobile no 03337334720
not available in changhong ruba. other universal software ara available on site
p42q638 changhong rubasoftwer needed 03016911917 watsapp number
not available
my led led42e3700 cant detect firmware you provided
why you want to load?
this is backup file and cal be load by programmer when tv is dead
Walikum Salam!
I need software upgrade of LED TV 40″ MODEL LED40D3900i? Not available above listed. Please request need.
Best Regards
No need to update. installed version is final
Dear friend,
I would like to upgrade the software of LED32D3900i, I have included third-party app youtube but its not working. Please advise.
Old Software is v2.32402
Waiting for your positive response
Chinese brands have the final version installe3d in it. no need to update
It same me. I am waiting that reply of software update.
Led40d3900i Model hai. Bhai software ur gya hai. Starting say agaay nahe jaa raha. Mil sakta hai iska software??
dear iska software nai hy mere pas. ap isko hard reset karne ki try karen. aur kia apko malom hy k isme board konsa installed hy???
Nahe bhai board tu nahe pata :((( changhong ki Led hai. Main apko call kr raha tha. Ak number mila tha YouTube per vo kisi aur ka tha aur usne kaha main apko kazmi sahab ka num send krta hn per kya nahe
dear is model ka software nai hy mere pas
Salam Elekom,
ChangHong 32″ LED TV mei Android Version 4.4.4 installed hai kya upgrade ho sakta hai
Production Model: ch-hw338-dtv-00-00
plz advise
No
Changhong Ruba model led 40d3900i
Software
board konsa hy?
Same issue
Changhong rubs model l32g3mi ma software kasy instil ho gay smart led hay plz reply
iska software mile ga he nai install to bad ki bat hy
Sir l32g3mi mein apps kesy install hon ge play store bhi nahi ha
yeh smart tv hogi android nai. isme usb se to nai hogi
Need changhong ruba led32C2000 software update latest plz help me
update not available
Sir
I have changhong ruba LED43F5828i so i want to dowlaod youtube and netflix software.
Kindly advise me where i can download from these two software?
you can install smart youtube but netflix may not work
I have changhang modèle :led49d1000is mise à jour
ineed software changhong ruba modle 3D47A70001
NA
aslam o alikum
janab mujy changhung ruba ka es madl ka u49g7ki ka softwear chaheay ap sy ml skta hy .
mujy updat krna hy
w.salam
can not update. installed version is final
Changhong ruba model = CH-HW338-DTV-00-00 ka software nhi ha to phe ye company kr kia rahi ha is ka matlab k next time kabi bhi changhang ruba ki koi bhi product na lein jab inki support hoi nhi ha to phr ye company farag ha.
dear company k support center ya repairing center hen woh charge karte hen. wese is model me software karne ki zarorat nai. ap isko hard reset kar len
Sir mujhe Changhong ruba U49g7ki ka software chahiya ha
NA
Aoa. brother mere pass 39E3800 LED TV ha changhong ruba ka, usme netflix ka play store me option nhi arha ha.. baki sb arha ha . kase resolve hoga ye issue or secondly you tube b open k bad khud band hojata ha 3 4 br jakae chalta ha. kindly giude meine reset bht br kia ha but nor issue still persist.
w.salam dear koi hal nai iska
Salam
I want to need LED55D4000I SOFTWARE UPDATE HOW I CAN PLEASE HELP MY NUMBER IS 03120356233
update not available
changhong ruba 49f5808i upgraded firmware exiting android version is 4.4.4 and production model is CH-HW388-DTV-00-00.kindly share new software for it
iski udpate nai hy
Kazmi sahib led wastim share ka soft ware sand kar daan thanks
Search by model/board number
39f5800i firmware available? Youtube open to ho rhe hai lakin koi video play nhi ho rhe kia solution hai iska boss?
I need youtube software for android LED39F5800i, product model CH-HW338-DTV-00-00, can you help me?
https://www.kazmielecom.tech/category/software/mobile-apps/
Sir I need update of my LED
Company: Changhong Ruba iSMART TV 2.0
Model: LED43F5908i
update not available
Asalam o Alikum,
Sir CHANGHONG RUBA MODEL: LED40F3808M is not available in the list.
w.salam iska nai hy mere pas
Sir mey LED40F3808M ma remote sensor ki light continuously blink kar rahe hai or source k menu bar bar chal raha hai menu ruk nahi raha. bar bar source k option per cursor automatic chal raha hai.
any idea k firmware problem hai ya hardware masla hai
Thanks in advance.
Si Mery is model ma led k remote senor ki light blink horahe hai cotinuously. menur ruk kar seleck nahi horaha. coursor chalta rahta hai bus or light blink karti rahti hai.
ya software ka masla hai ya hardware please guide me
pehly remote se cell nikal k check karen phir sensor patti ko
Bhai mje CHANGHONG RUBA LED39F5808i LED ka Software Chahiye
Iska nai hy. Board number se search karen